Eneo VKC-1341A/12-24 Installation And Operating Instructions Manual

Category
Security cameras
Type
Installation And Operating Instructions Manual

This manual is also suitable for

1
Montage und Betriebsanleitung
1/3” Tag/Nacht-Farbkamera, hochauflösend
VKC-1341A/12-24, VKC-1341A
Installation and Operating Instructions
1/3” Day/Night Colour Camera, High Resolution
VKC-1341A/12-24, VKC-1341A
2
Betriebsanleitung
Installation and Operating Instructions
Mode d’emploi
Instrucciones de manejo
www.videor.com
Inhaltsverzeichnis
1. Sicherheitshinweise ...........................................................................................................3
2. Allgemeine Beschreibung ...................................................................................................
4
3. Kamera - Übersicht ............................................................................................................
5
4. Funktionsbeschreibung ......................................................................................................
6
5. Menü .................................................................................................................................
7
6. Anschlüsse ......................................................................................................................
22
7. Objektivanschluss ............................................................................................................
23
8. Fehlersuche .....................................................................................................................
28
9. Technische Daten ............................................................................................................29
10. Maßzeichnungen .............................................................................................................
56
Contents
1. Safety Instructions ...........................................................................................................31
2. General Description
..........................................................................................................32
3. Camera Overview ............................................................................................................
33
4. Function Description ........................................................................................................
34
5. Menu ...............................................................................................................................
35
6. Connections .....................................................................................................................
48
7. Lens Connection ..............................................................................................................
49
8. Troubleshooting ...............................................................................................................
53
9. Specifications ..................................................................................................................
54
10. Dimensional Drawings .....................................................................................................
56
16
5.5 SPECIAL (Spezialeinstellungen)
Drücken Sie die MENU-Taste, um das „SPECIAL”-Menü aufzurufen.
SPECIAL
SHARPNESS
-OFF
-ON
• LEVEL |--------|--------| 1 ~ 31 (8)
• END
MIRROR OFF / ON
SYNC
-INT
-LL
• PHASE |--------|--------| 0 ~ 359 (0)
• END
PRIVACY
-OFF
-ON
AREA SEL AREA1 / AREA2 / AREA3 / AREA4
AREA STATE OFF / ON
AREA TONE
|--------|--------| 1 ~ 100 (80)
TOP
|--------|--------| 1 ~ 62 (15)
• DOWN
|--------|--------| 1 ~ 62 (30)
• LEFT
|--------|--------| 1 ~ 96 (15)
• RIGHT
|--------|--------| 1 ~ 96 (35)
• END
END
31
1. Safety Instructions
Read these safety instructions and the operation manual first before you install and
commission the camera.
Keep the manual in a safe place for later reference.
Protect your camera from contamination with water and humidity to prevent it from perma
-
nent damage. Never switch the camera on when it gets wet. Have it checked at an authorized
service center in this case.
Never operate the camera outside of the specifications as this may prevent the camera
functioning.
Do not operate the cameras beyond their specified temperature, humidity or power ratings.
Operate the camera only at a temperature range of -10°C to +50°C and at a humidity of
max. 85%.
To disconnect the power cord of the unit, pull it out by the plug. Never pull the cord itself.
Pay attention when laying the connection cable and observe that the cable is not subject to
heavy loads, kinks, or damage and no moisture can get in.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Do not open the camera housing.
Never point the camera towards the sun with the aperture open. This can destroy the sensor.
Installation, maintenance and repair have to be carried out only by authorized service centers.
Before opening the cover disconnect the unit from mains input.
The fitter is responsible for the system of protection being followed in accordance with the
technical data, e.g. by sealing of the cable outlet with silicone.
Contact your local dealer in case of malfunction.
Only use original parts and original accessories from Videor E. Hartig GmbH.
The camera is equipped with an automatic gain control (AGC) which increases the sensitivity
at low light levels. Noisy pictures at these conditions are quite normal.
Pictures including bright spotlights will cause perhaps vertical lines (smear) or soft edges
(blooming) on the monitor display. This happens most probably in automatic shutter mode (ESC).
This is not a defect but an effect caused by the CCD sensor.
Do not use strong or abrasive detergents when cleaning the dome. Use a dry cloth to clean
the dome surface.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
NOTE: This is a class A digital device. This digital device can cause harmful interference
in a residential area;
in this case the user may be required to take appropriate corrective action at
his/her own expense.
32
2. General Description
The camera provides high-quality images using SONY Wide Dynamic 1/3” CCD and digital
processing LSIs.
1/3” Super HAD Colour CCD Sensor
Horizontal Resolution of 540 TV Lines
Sensitivity of 0.23Lux at F1.2
Digital Noise Reduction (DNR)
Automatic Gain Control (AGC)
Selectable Backlight Compensation Zones (BLC)
High and Low Shutter Control (MES/ESC/DSS)
On-screen Menu Control
Camera Title Display
Privacy Masking
Mirror Function
Motion Detection
Picture Sharpness and Flickerless Adjustment
Auto Iris / DC Iris Control
C/CS Mount
Supply Voltage:
VKC-1341A/12-24 - 12VDC or 24VAC
VKC-1341A - 100 ~ 240VAC
Contents of Package
Installation of the camera must be performed by qualified service personnel in accordance with
all local and national electrical and mechanical codes.
Carefully remove the colour camera and its accessories from the carton and verify that they
were not damaged in shipment.
The contents of the package includes:
Colour CCD camera
4 pin lens plug
C mount adapter ring
33
3. Camera Overview
Side View
C Mount Ring
C Mount Lens
CS Mount Lens
Front View
100-240V Type
12VDC/24VAC Type
100-240V Type
12VDC/24VAC Type
Top View
34
Rear View
4. Function Description
Side View
1 Left Button
2 Up Button
3 Enter Button
4 Right Button
5 Down Button
1 Flange Focus Adjusting Mechanism
2 Auto Iris Lens Connector
100-240V Type 12VDC/24VAC Type
6 Video Out Connector
7a AC Power Cord
7b AC/DC Compatible Input Terminal
8 Power Indicator
35
5. Menu
<MAIN MENU>
WB
AE
BLC
CAM SET
SPECIAL
D&N
DNR
MOTION DET OFF
END
Settings
Settings can be made using the 5 buttons located on the back of the camera.
1 The MAIN MENU is displayed on the monitor when press the ENTER button.
2 Please select any function you wish to activate by using the
and buttons. The arrow
can be moved up or down by using the and buttons. Please position the arrow to point
to the function you wish to operate.
3. Press the
or button if you wish to change mode.
When the or button is pressed, available values and modes are displayed in order.
Please keep pressing the button until you get to the mode you wish to operate.
4. To finishing the setting without save, select „END” and then press the ENTER button. But if
you want to keep the setting, enter the CAM SET menu, select „SAVE” and then press the
ENTER button.
NOTE: If „ - - -” appears at the mode item, it means that is no mode available to be
selected.
Select any
function you
wish to ope-
rate by using
the and
buttons.
If appears
at he mode
you wish to
operate, it
means that
there is a sub
menu which
can be selec-
ted by pressing
the ENTER
button.
Modes can be
changed using
the or
button.
36
Default settings:
bold
5.1 WB
Press the MENU button to access the „WB” mode.
WHITE BAL.
MODE ATW
/ AWC / MANUAL
RED |--------|--------| 0 ~ 100 (32)
BLUE |--------|--------| 0 ~ 100 (38)
EXIT
MODE
ATW (Auto Tracking White Balance)
This mode can be used within the colour temperature range 1,800K ~ 10,500K
AWC (Auto White Balance Control)
Please press the MENU button while the camera is directed at a piece of white paper to
obtain the optimum state under current illumination. If the environment including the light
source is changed, you have to adjust the white balance again.
MANUAL
The manual adjustment mode enables finer adjustment. You can adjust the RED and BLUE
colour values while monitoring the colour changes on the object at the „RED” or „BLUE”
menu. The „R GAIN” and „B GAIN” is available only at the MANUAL mode.
NOTE: Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWC mode.
When the object’s surroundings have a very high colour temperature.
(eg. A clear sky and sunset)
When the object’s surroundings are dark
If the camera directly faces a fluorescent light or is installed in a place where
there are considerable changes in illumination, the WHITE BALANCE function
may become unstable.
37
RED
Adjust the RED by using the or button.
(This is effective only in case of selecting the MANUAL MODE) 0 ~ 100
BLUE
Adjust the BLUE by using the or button.
(This is effective only in case of selecting the MANUAL MODE) 0 ~ 100
END
RETURN to MAIN MENU
38
AUTO EXPURE
MODE
-AUTO
• BRIGHTNESS |--------|--------| 1 ~ 70
• END
-SHUTTER
• SHUTTER X128~1/120,000 (1/50)
• END
-FLK
AGC
-HIGH
• BRIGHTNESS |--------|--------| 1 ~ 70
• END
-MIDDLE
• BRIGHTNESS |--------|--------| 1 ~ 70 (25)
• END
-LOW
• BRIGHTNESS |--------|--------| 1 ~ 70
• END
-OFF
LENS
-MANUAL
-DC
• BRIGHTNESS |--------|--------| 1 ~ 70 (25)
• END
-VIDEO
SENS-UP
-OFF
-AUTO
X2~X128 (X8)
• AUTO
• END
END
5.2 AE
Press the MENU button to access the „AE” mode.
39
MODE
AUTO
Auto control of the shutter speed can be achieved. When AUTO mode is on, the speed is
controlled automatically according to the brightness of the screen.
BRIGHTNESS Adjust the „BRIGHTNESS” to the desired LEVEL by using the
or
button.
END RETURN to AE MENU
SHUTTER
The shutter speed can be controlled manually. X128 ~ 1/120,000
FLK
Please select „FLK” mode when flickering occurs on the screen, due to an imbalance
between illumination and frequency. 1/120 sec.
NOTE: When selecting DC/VIDEO lens, you can choose „FLK” or „1/50”.
The „FLK” functions FLICKLESS OFF and the „1/50” functions E/I OFF.
While using the internal system, if the shutter setting is on „AUTO” and the
camera is directly facing a bright fluorescent light, the image on the screen can
be adversely affected. Therefore please choose the installation location with care.
When „SHUTTER” mode is on, the SENS UP function does not operate.
AGC (Auto Gain Control)
Adjust the AGC GAIN to the desired mode by using the or button. As the level of gain
increases, the screen gets brighter and the level of noise also increases.
HIGH / MIDDLE / LOW / OFF
BRIGHTNESS Adjust the „BRIGHTNESS” to the desired LEVEL by using the or
button. 1 ~ 70
END RETURN to AE MENU
LENS
Automatic control of the brightness level through the intensity of radiation.
MANUAL
Available by using manual lens
DC
LEVEL Adjust the brightness level by pressing the or button at the
DC’s submenu. Level setting is available only by using the DC IRIS lens.
Then put the A/I LENS selection switch on the side of the camera in the
„DC” position.
END RETURN to the AE MENU
VIDEO
40
When using Auto Iris Lens with Video type
1) Adjust ALC volume on the lens properly. Normally ALC volume should be turned all
the way to Av (Average).
2) According to the type of the lens used, the lens may not perform properly. In such a
case, adjust the volume level on the lens.
3) For adjusting the Volume Level, enter the submenu at the „VIDEO LENS” mode.
And then adjust it to the desired state.
NOTES: When the auto iris is mounted, you have to set the DC/Video selection
switch on the side of
the camera properly according to status of this selection switch.
NOTE: When using an auto iris lens, the setting of the auto iris lens selection switch,
located on the back of the camera, must be on DC or VIDEO depending on the
type of the lens which is being used.
The brightness of the screen can be adjusted in DC mode. The brightness can
be adjusted within the range of 0~70. The optimum level of brightness for the
user can be achieved by adjustment.
SENS-UP (Low illuminance)
SENS UP helps maintain a bright, clear screen image by automatically detecting changes in
the level of light in low light level conditions.
OFF
The function does not operate.
AUTO
Low light level auto mode. x2 ~ x128
NOTE: When SHUTTER is in the manual mode, SENS UP does not operate.
When AGC is turned off. SENS UP does not operate.
NOTE: The maximum storage magnification in low light level movement situations can
be adjusted by pressing the ENTER button in „AUTO” mode. (x2 ~ x128)
As the magnification increase, the screen gets brighter; however the after
image also increases.
If storage magnification is increased while SENS UP is operating, it may cause
noise, and spots may appear; however this is normal.
END
RETURN to the MAIN MENU
41
Prevents such a back light effect to secure a clear image under all illumination environments.
LEVEL
HIGH / MIDDLE / LOW / OFF
END
RETURN to MAIN MENU
5.3 BLC
Press the MENU button to access the „BLC” mode.
BLC
LEVEL
HIGH / MIDDLE / LOW / OFF
END
42
5.4 CAM SET
Press the MENU button to access the „CAM SET” mode.
TITLE
Select the camera TITLE that may be composed of letters, numbers, special texts, or a
combination of these up to 15 digits.
Move to left
Move to right
CLR Erase all character
POS Change the position of the title (If you want to change the position of the title, press
ENTER button at the POS. Find the position you wish to display the title by using the
4 directional buttons, and then press the ENTER button.)
END End
NOTE: If the wrong name has been input:
If you press the ENTER button after moving the cursor the CLR, all the letters will
be erased. If you want to correct a letter, please move the cursor to the arrow at
the bottom left of the screen and press „ENTER”. Please position the cursor above
the letter you wish to correct, and then move the cursor onto the letter you wish to
choose and press the ENTER button.
DISPLAY
ON:
Display TITLE in the monitor.
OFF: Disappear TITLE in the monitor.
DEFAULT
The factory setting of the Camera is selected.
CAM SET
TITLE
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- , 0 1 2 3 4 5 6 7 8 9
C L R P O S E N D
DISPLAY
ON / OFF
DEFAULT
SAVE
EXIT
43
SAVE
The changed Baud Rate is saved.
END
RETURN to MAIN MENU
5.5 SPECIAL
Press the MENU button to access the „SPECIAL” mode.
SPECIAL
SHARPNESS
-OFF
-ON
• LEVEL |--------|--------| 1 ~ 31 (8)
• END
MIRROR OFF / ON
SYNC
-INT
-LL
• PHASE |--------|--------| 0 ~ 359 (0)
• END
PRIVACY
-OFF
-ON
AREA SEL AREA1 / AREA2 / AREA3 / AREA4
AREA STATE OFF / ON
AREA TONE
|--------|--------| 1 ~ 100 (80)
TOP
|--------|--------| 1 ~ 62 (15)
• DOWN
|--------|--------| 1 ~ 62 (30)
• LEFT
|--------|--------| 1 ~ 96 (15)
• RIGHT
|--------|--------| 1 ~ 96 (35)
• END
END
44
SHARPNESS
The outline of the video image becomes cleaner and more distinctive as the level of
SHARPNESS increases. If the level goes up excessively, however, it may affect the video
image and generate noise.
LEVEL
Adjust the SHARPNESS of the screen by using the or button. 0 ~ 31
END
RETURN to SPECIAL MENU
MIRROR
ON:
Sets a horizontal image inversion
OFF: Cancels the inversion
SYNC
Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL LINE-LOCK. In
LINE-LOCK mode, it synchronizes the video signal between cameras without a synchronous
generator.
INT
This mode is necessary for using the internal synchronization.
LL (synchronisation with the mains phase, during AC operation)
When using more than one camera, this mode can be used to synchronise all the cameras
with the same mains phase.
LEVEL
Sync phase is adjustable in line lock mode 0 ~ 359
END
RETURN to SPECIAL MENU
NOTE:
When using a 12 V DC supply, operation in line lock mode is not possible.
PRIVACY
Conceals the areas you do not wish to appear on the screen.
OFF: Cancels the PRIVACY mode
ON: Operates the PRIVACY mode. To adjust PRIVACY MASK, press „ENTER” button.
• AREA SEL
Select the AREA you want to adjust.
• AREA STATE
Select „ON” to display the selected AREA, and select „OFF” to conceal the
selected AREA.
AREA TONE Adjust the tone of the selected AREA. 1 ~ 100
• TOP
Adjust the TOP of the selected AREA by using the or button.
• DOWN
Adjust the DOWN of the selected AREA by using the or button.
45
• LEFT Adjust the LEFT of the selected AREA by using the or button.
• RIGHT
Adjust the RIGHT of the selected AREA by using the or button.
END
RETURN to SPECIAL MENU
END
RETURN to MAIN MENU
5.6 D&N
Press the MENU button to access the „D&N” mode.
D&N
AUTO
This camera has a function which automatically changes to the appropriate mode for
daytime or night-time. The COLOR mode is operated for daytime, and it converts to
BW mode for night-time.
COLOR
In this mode, the camera outputs the video image only in colour.
BW
In this mode, the camera outputs the video image only in black and white.
END
RETURN to MAIN MENU.
NOTE: When the AGC is turned off. AUTO does not operate.
• When an infrared light is used, there may be a problem with focusing.
D&N
MODE AUTO
/ COLOR / BW
END
46
5.7 DNR
Press the MENU button to access the „DNR” mode.
DNR
LEVEL
HIGH / MIDDLE / LOW / OFF
END
The background noise in the low light level decreases automatically as the level of gain changes.
LEVEL
OFF
There is no reduction in noise level.
LOW
There is a small reduction in noise level with almost no ghost image.
MIDDLE
The most effective mode. There is a sufficient reduction in noise levels
without causing much ghost imaging.
HIGH
The level of noise is reduced greatly, however there is an increase in ghost
imaging.
END
RETURN to MAIN MENU
NOTE: When AGC is turned off, DNR does not operate.
47
5.8 MOTION DET
Press the MENU button to access the „MOTION DET” mode.
This product has a feature that allows you to observe movements of objects in 4 different areas
on the screen, and the words „MOTION DETECTED” is appeared on the screen when movement
is detected; hence a single individual can conduct supervision efficiently. The camera detects an
object‘s movement by sensing disparity of outline, and level of brightness and colour.
OFF: MOTION DETECTION mode is cancelled.
ON: Any motion in the selected areas is observed.
AREA SEL
Select the AREA you want to adjust.
AREA STATE
Select „ON” to display the selected AREA, and select „OFF” to conceal the selected AREA.
TOP
Adjust the TOP of the selected AREA by using the or button.
DOWN
Adjust the DOWN of the selected AREA by using the or button.
LEFT
Adjust the LEFT of the selected AREA by using the or button.
RIGHT
Adjust the RIGHT of the selected AREA by using the or button.
END
RETURN to MAIN MENU
END
Terminate the MAIN MENU without save the changed preset parameter.
MOTION DETECTION
AREA SEL AREA1 / AREA2 / AREA3 / AREA4
AREA STATE OFF / ON
TOP |--------|--------| 1 ~ 62 (15)
DOWN |--------|--------| 1 ~ 62 (30)
LEFT |--------|--------| 1 ~ 96 (15)
RIGHT |--------|--------| 1 ~ 96 (35)
END
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Eneo VKC-1341A/12-24 Installation And Operating Instructions Manual

Category
Security cameras
Type
Installation And Operating Instructions Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages