Hyundai H-LEDVD22V2 User manual

ТЕЛЕВИЗОР

ЦВЕТНОГО ИЗОБРАЖЕНИЯ

С ЖИДКОКРИСТАЛЛИЧЕСКИМ

ЭКРАНОМ И ВСТРОЕННЫМ

DVD-ПРОИГРЫВАТЕЛЕМ

LED TV WITH BUILT-IN DVD

PLAYER

Руководство по эксплуатации Instruction manual

H-LEDVD22V2

Repeat

Display

Goto

Intro playback

Audio/Language

Subtitle

Angle

Zoom

Repeat A-B

USB/SD/MMC operation

DVD setting

System setup

Language setup

Audio setup

Digital setup

General information

Troubleshooting

Causes of interference

Accessories

Specifications

Table of contents

Before you start

Utilization of the product

Important safeguards

Stand installation

Wall mounting

Connection

Outdoor antenna connection

Other connections

Operation

Control elements

Front, top and lateral panel

Back panel

Remote controller

Changing the battery

General operations

AV signal sources

Teletext operations

PC screen

OSD operation

Picture setting

Sound setting

TV Setting

Function setting

PC setup

DVD player operation

Turn on/off

Insert disc

Play the disc

Menu playback

Title playback

Program playback

Track selection

Previous/Next

Forward/Backward

Slow motion

Pause

2 3

Table of contents Before you start

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

2 3

Table of contents Before you start

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,

you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human

health.

Utilization of the product

Important safeguards

• Before connecting the AC power cord

to the DC adapter outlet, make sure that

the voltage designation of the DC adapter

corresponds to the local electrical supply.

• Accessories include a DC adaptor KPA-

060F. Do not use other adaptors with this unit.

• Please unplug the power cord from the AC

outlet and contact a service center for repair

if following occurs: any obvious abnormality

appears in the unit, such as smoky, peculiar

smell or strange sound; liquid has been spilled or

other objects have fallen into the unit; no picture

or sound; cover or panel is broken; although you

have operated the unit following the operating

instructions, it still cannot work normally.

• This unit should only be connected to a

wall socket having grounding.

• Always disconnect the power cord and

antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;

also unplug the signal cables from the input

ports when the unit is unused for long periods

of time.

• When unplugging the plug, always hold

the wide slot, do not touch the metal part, and

do not destroy, refit, twist, pull or roast the

power cord.

• Please contact the service center

immediately if you found that the core is

showed in the air or has been broken.

• Please replace the AC outlet if the metal

bolt cannot be inserted into the power socket

completely or it cannot be fastened even when

it was pushed in, otherwise, any accidents of

shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket

with numerous devices jointed on one power

socket or cable device. The wire of non-

designated capacity may cause the fire due to

the generation of heat.

• All instructions must be read and

understood well before you operate the unit.

Heed all warnings and follow all instructions.

• Please use the accessories provided

by the manufacturer. Using inadequate

accessories may result in accidents.

• Please adjust the product through the

panel buttons or the remote controller, do

not remove the cover or attempt to service

the product by yourself. Do not disassemble

back cover and do not make maintenance by

yourself to avoid the electric shock.

• Over-press the panel may destroy the

product.

• Do not place the product on an unstable

cart, stand surface, tripod, bracket, or table.

The product may fall, causing serious accidents

as well as the damage to the product.

4

Before you start

• Please place the product on a flat surface

in a well-ventilated location. Keep it away from

the burning-light, direct sunlight, vibration,

high-temperature and humidity. Store the

product with a temperature from –20

0

C ~50

0

C;

otherwise you may destroy the product.

• Do not place any vase, potted plant, cup,

medicine and any container with water on this

product. If the liquid is spilt, it may cause the

fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause

break down. This equipment may be observed

deterioration of the picture by electromagnetic

radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it

moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on

this product. If it is tipped over or fallen down, it

may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the

product lifetime. Keep a space at list 10cm at

above, left, and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the TV

up or down display direction.

• Do not transport it with the power cord

or the connection cable connected. If you

move this product with the power cord or the

connection cable connected, the damaged

power cord, connection cable or connection

terminal may cause the fire, the electric shock

or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop

or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use.

This phenomenon indicates that heat exchange

in normal working mode, thus please do not

let children or anyone who is sensitive of

temperature to touch.

Stand installation

Insert the fixer in the bottom of the unit body

into the hole of the stand. Rotate the stand

clockwise until a click to lock it in place.

Wall mounting

For wall mounting the back panel of this

unit is equipped with 4 screw holes (4 mm

diameter, 100 mm horizontal spreadistance

x 100 mm vertical spread distance). A

wall-mount bracket should be used for wall

mounting (bracket is not included and should

be acquired separately). Manufacturer is not

responsible for improper mounting resulting in

damage of the unit.

All images provided herein are schematic

drawings of real objects and may differ

from their real images.

5

Сonnection

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω

impedance converter to plug in antenna input

terminal on the rear of the cabinet.

Other connections

• Connect the audio sources (Including

DVD, VCDR, CAMCORDER and PC) to the

proper stereo audio input jacks ‘L’ and ‘R’.

• Connect the video source to the composite

video jack by RCA cable.

• If the video source has a SCART output

jack, you can connect the signal to the monitor

by the SCART cable.

• Insert the power cord to the DC adaptor,

then connect the adaptor to the power socket

of the unit.

• When using the LCD as a computer

screen, connect the PC to the VGA jack from

the monitor by the relevant cable.

Connection

• This unit has PC audio in jack. Connect

this jack to PC main unit with related audio

cable in PC mode and adjust the volume to

what you want.

• If the video source has a HDMI output

jack, you can connect the signal to the monitor

by the HDMI cable.

• Component input Y/Pb/Pr is intended for

receiving component video signal if connected

to the component output of external signal

source.

• Connect your headphones or earphones

(not included) to the headphone socket of

this unit. When earphones are connected, the

sound output through the built-in speakers of

this unit is mute.

• If the video source has a Coaxial input

jack, you can connect the signal source to the

coaxial output of the unit by related cable.

75 Ohm co-axis cable

TV RF antenna jack

Antenna cable connector

6

Operation

Control elements

Front, lateral and top panel

1. MENU button

2. CH+/CH- buttons

3. VOL+/VOL- buttons

4. INPUT button

5. PLAY button

6. EJECT button

7. POWER button

8. Disc slot

9. IR sensor

10. Power indicator

Back panel

1. TV RF antenna socket

2. Stereo audio input

3. Composite video input

4. Component (YPbPr) input

5. SD/MMC slot

6. USB port

7. Power socket

8. HDMI input

9. VGA input

10. PC audio input

11. SCART connector

12. Headphone output

13. Coaxial digital audio output

1 2 3 4 5 6 7

8

9

10

1

2

3

4

5 6 7 8 9 10 11 12 13

7

Operation

Remote controller (RC)

1. POWER button

2. Number buttons

3. PICTURE button

4. SOUND button

5. VOL+/VOL- buttons

6. MUTE button

7. EXIT button

8. OK button/cursor buttons (

/ / /

)

9. button

10. button

11. REPEAT button

12. ZOOM/ASPECT button

13. GOTO/HOLD button

14. SLOW/TV/TEXT button

15. INTRO/INDEX button

16. PROGRAM/SUBPAGE button

17. / button

18. INPUT button

19.

button

20. DISPLAY button

21. SLEEP button

22. CH+/CH- buttons

23. OSD MENU button

24. button

25. SETUP button

26. A-B button

27. MENU button

28. SUBTITLE button

29. LANGUAGE/NICAM/A2 button

30. ANGLE/SIZE button

31. TITLE/REVEAL button

32.

/ buttons

Changing the battery

1. Remove the battery compartment cover

on the back of the RC.

2. Insert the batteries into the battery

compartment making sure that the correct

polarity is observed.

3. Install the cover back.

• Use two AAA batteries for the RC. The RC

should be pointed at remote sensor within 8

meters and within 30 degrees at the left or the

right side.

• Take the battery out of the RC if it is not

used for a long time. Do not mix new and used

batteries or different types of batteries. Weak

batteries can leak and severely damage the RC.

• Do not expose the RC to shock, liquids, and

do not place it in an area with high humidity.

1

2

3

4

5

6

7

8

9

10

25

24

23

22

21

20

19

18

11

26

12

27

13

28

14

29

15

30

16

31

17

32

8 9

Operation Operation

General operations

• Press POWER button on the unit or on the

RC to switch on the power, the indication light

will be in green color. Press POWER button

again to switch the unit to standby mode, and

the light will be in red color.

• The picture setup, sound setup, previous

channel can be memorized before you switch

off the unit. The unit will restart under the

previous state when you switch on it again.

• Press VOL- button repeatedly to decrease

the volume; press VOL+ button repeatedly to

increase the volume.

• Press SLEEP button repeatedly to set the

sleep time.

• Press INPUT button on the RC to select

the TV function mode. Channel ‘1’ will appear

on the right top corner after channel searching

is completed. Press CH-/CH+ buttons to select

previous or next channels; or press number

buttons to enter a channel number directly;

or press [-/--] button until the screen displays

‘-’ or ‘--’, then use number buttons to enter a

channel number from 1 to 199.

• Press

button on the RC to select

from the present channel and the previously

displayed channel.

• Press PICTURE button repeatedly to cycle

through the available video picture modes from

the following 4 types: User => Normal => Soft

=> Vivid.

• Press SOUND button repeatedly to cycle

through the available sound modes from the

following 4 types: User => Normal => News =>

Movie.

• Press MUTE button to cut off sound, press

this button again or adjust volume to resume

sound.

• Press DISPLAY button to display the

preset TV channel play information.

• Press ZOOM/ASPECT button repeatedly

to select a screen display size from the

available list: 16:9/4:3.

AV signal sources

Press INPUT button on the RC, then

press

/ cursor buttons or CH+/

CH- buttons on the panel to cycle through

the available source list as follows: TV - AV -

YPbPr - DVD - SCART - VGA - HDMI. Press

cursor button to confirm.

TELETEXT operations (option)

Select TV channel in order to pick up the

picture signal of Teletext. Teletext button

functions are as follows:

TV/TEXT: Press TV/TEXT button to enter

into TEXT mode. Press this button again to

return to the channel you are watching.

HOLD: Press this button to stop the move

to the next page. Press this button again to

cancel operation.

INDEX: Press this button to go to page 100.

SIZE: Press this button to enlarge the text

shown on the teletext screen, and one half of

page could be shown.

Press this button again to view the second

half of this page.

Press this button third time to normal size

text page view.

REVEAL: Press this button to reveal the

cancelled information. Press this button again

to cancel the information.

SUBPAGE: Press this button to select

subpage. Enter the number of sub page and use

numeric buttons in the format 0001 for sub page

1. The teletext will search for the sub page.

Red/Green/Yellow/Blue buttons: Press

these 4 color buttons to access directly to

corresponding color page displayed at the

lower parts of teletext screen.

PC screen

Select the VGA input mode. The unit has a

VGA jack for a normal computer. Connect the

monitor to a PC by this jack and the unit can

be used as the monitor for the PC.

8 9

Operation Operation

OSD operation

Press OSD MENU button on the RC to enter

the OSD menu. Use / buttons to

select a setting page displayed on the screen.

Press

button to go the page. Press /

buttons to select the needed item, then

use

/ buttons to select available setting or

to adjust the selected item. Press OK button to

confirm.

After setting, press OSD MENU button to

return to the root menu or press EXIT button to

exit menu setting.

Picture setting

Move

Select

Exit

Picture mode

Brightness

Contrast

Saturation

Sharpness

Hue

Scale

Picture

• Picture Mode: User/Normal/Soft/Vivid.

• Brightness

• Contrast

• Saturation

• Sharpness

• Hue: adjust the tint of color when your

system is in NTSC.

• Scale: select 16:9/4:3 picture mode.

In PC mode only brightness and

contrast are adjustable.

Sound setting

Move

Select

Exit

Sound mode

Volume

Bass

Treble

Balance

Sound

• Sound Mode: User/Normal/News/Movie.

• Volume

• Bass

• Treble

• Balance: adjust output between left and

right speakers.

TV setting (only in TV mode)

Move

Select

Exit

Auto tune

Manual tune

Fine tune

Skip

Sound sys

Channel swap

TV

• Auto tune: enter into auto tuning menu.

Then press

button to start auto tuning. When

it finds a station it will automatically store this

in first location and move to the next. When

auto tuning is completed, the TV will show the

first station found. You can stop the auto tuning

proces by pressing OSD MENU button.

• Manual tune: this item allows you to

select preset channel’s frequency one by one

10

Operation

with / buttons.

• Fine tune: perform fine adjustment of the

current frequency.

• Skip: select On/Off. When set On, the

corresponding channel will be skipped while

listing channels up/down.

• Sound system: select the sound system.

• Channel swap: Press

button to

go to swap menu. Under CHANNEL1 and

CHANNEL2 select channel numbers you

want to swap, then press button to confirm

operation.

Function setting

Move

Select

Exit

Language

Blue back

TTX language

Color temp.

Reset

Function

• Language: select the OSD language.

• Blue Back: select On/Off. Selecting On

means the screen background colour could be

in blue if there is no or weak signal (only in TV

mode).

• TTX language: select the area of teletext

language.

• Color temperature: Cool/Warm/Normal/

User.

• Reset: Press button to reset all settings.

PC Setup (only in VGA mode)

Move

Select

Exit

H-Position

V-Position

Clock

Phase

Auto adjust

PC

• H-Position/V-Position: adjust horizontal

and vertical position of the image.

• Clock: adjust the image frequency

manually.

• Phase: adjust the phase manually.

• Auto adjust: automatical setting of the

parameters.

In this manual, the OSD Menu maybe

changed and different from your real TV’s

screen without further notice. This manual is

just a sample to help you how to operate menu

setting.

DVD player operation

Turn on and off the DVD function

Turn on the LCD TV and then select DVD

source.

Insert disc to DVD

Insert the disc to the disc slot, the player

will load the disc automatically. There will be

indication “READ” on screen. After loading

the disc content, it will switch to play mode

automatically.

• Insert disc with reflective data side

facing the front of the unit. When inserting the

disc incorrectly, you may damage the DVD

11

Operation

menu. Press the direction or number buttons to

select your favorite title, it will play from the first

chapter of selected title.

Program playback

Using Program playback, you could select

max. 16 tracks from the disc to playback in

programmed order. Press PROGRAM button

to display program menu as below (this is

different for various types of discs):

• According to the highlight area input the

title and chapter number by numeric buttons,

press

button to start; or move the cursor to

the PLAY by cursor buttons, press OK button

to start.

• While playing the program, you may press

PROGRAM button to display the program menu

for edit. To clear the program move the cursor

to CLEAR and press OK button. Or press

button to end the program. When press

button again, the disc will play subsequently.

• While playing the program, there will be

program playback indication and the current

title and chapter number.

Track selection

• For Super-VCD/VCD/CD discs, while

playing the disc, you may play your favorite

tracks by number buttons.

• For MP3/JPEG discs, while playing the

disc, you may play your favorite tracks by

numeric buttons from the content menu.

Previous/Next

While playing a disc: press button to play

the last title/chapter/track; press

button to

mechanism. Some slight picture noise and

some sounds are produced when the disc is

loading, unloading and during playback, this is

normal and can be ignored.

• For some discs, after loading the content

of the disc, you need to press

button or

select from the disc menu to start.

• To eject the disc from the loader press

button on the RC or EJECT button on the unit.

Play the disc

According to the disc content, menu will

display for your selection. When playing the

disc, you may use

button to toggle between

Play and Pause mode.

Manufacturer guarantees regular

playback of licensed discs only. Some AVI files

cannot be played due to their parameters and

recording conditions. Video files more than 2 Gb

having AVI extension can be played partially.

Menu playback

1. Press MENU button to display disc menu

or return to the root menu when playing the

disc. For DVD discs, the screen will display

the DVD disc menu (Root Menu). Please

use navigation buttons to select and play the

highlighted contents.

2. Press OK or

button to start from

highlighted content.

3. Press

button once to stop, press

button to resume from where you stopped; Press

button twice to stop, press button to start

from beginning.

• In order to protect the disc, press

STOP button, then press press

to take disc

out. When the disc is ejected, hold the disc

edge slightly and take it from the eject direction

to prevent scratches.

• When not using the DVD function (in

standby or using other sources for a long time),

please take out the disc to protect the DVD

mechanism and the disc.

Title playback (for DVD title disc only)

Press TITLE button to display the disc title

12 13

Operation Operation

play the next title/chapter/track.

Forward/Backward

Press button to toggle between different

fast forward speeds in sequence: (x2/x4/x8/

x20/play). Press

button to toggle between

different backward speeds in sequence (x2/x4/

x8/x20/play).

• While in backward or forward, you may use

button to resume normal speed.

• For DVD discs, if backward to first title/

chapter, it will start from the beginning.

During forward or backward, the sound

will be off for some types of discs.

Slow motion

Press SLOW button to toggle between

different speeds consequently: 1/2 - 1/3 - 1/4 -

1/5 - 1/6 - 1/7 - play. While in slow motion, you

may press button to resume normal speed.

During slow motion, the sound will be off.

Pause

Press button to pause and press

button again to resume.

Repeat

Press REPEAT button once to display the

current repeat mode.

• For Super-VCD, VCD, CD, HDCD discs,

while playing in sequent, you may use the

repeat playback. There are 3 repeat modes,

press REPEAT button to toggle between

different modes in sequence (Repeat off/

Repeat track/Repeat disc).

• For DVD discs, you may setup the repeat

playback mode. There are 4 repeat modes,

press REPEAT button to toggle between

different modes in sequent (Repeat off/Repeat

chapter/Repeat title/Repeat disc).

• For MP3/JPEG discs, while playing the

disc, you may use the repeat playback. There

are 4 repeat modes, press REPEAT to toggle

between different modes in sequent (Repeat

off/Repeat track/Repeat directory/Repeat all).

Display

Press DISPLAY button repeatedly to activate

the roll-down menu on screen for the current

Title, Chapter, Time and other playback

information.

Goto (for DVD/CD discs)

This function allows you to play your favorite

title/chapter/track. Press GOTO button to

activate the scroll-down menu for edit on

screen. Press cursor button to navigate in

the menu. According to the highlighted area,

input your favorite title/chapter/track number

by numeric buttons or input the playback time.

After editing, press ENTER to start.

If the input is invalid, it will not function.

This feature does not work in program mode.

Intro playback

Press INTRO button to start intro playback of

each track for several seconds. This function is

unavailable for some disc formates.

Audio/Language

For DVD: Press AUDIO button once to display

current audio language. Press AUDIO button

repeatedly to toggle between different audio

languages if any available.

For VCD: Press AUDIO button once to display

current audio channel. Press AUDIO button

repeatedly to toggle between different audio

channels (Stereo (L/R) => R/R => L/L).

Subtitle (for DVD discs only)

Press SUBTITLE button once to display

current subtitle. Press SUBTITLE button again

to toggle between different subtitle languages.

Selectable subtitle languages depend

on the availability in the DVD contents.

Angle

Press ANGLE button once to display current

playback angle. Press ANGLE button again to

toggle between different layback angle modes.

Selectable playback angle depends on

the availability of the DVD contents.

12 13

Operation Operation

Zoom

Press ZOOM button to zoom out or in the

picture. There are 7 zoom modes you can

select in sequence: Zoom 2 - Zoom 3 - Zoom 4

- Zoom 1/2 - Zoom 1/3 - Zoom 1/4 - Zoom Off.

Repeat A-B

Press A-B button at where you want to start

the repeat portion, there is indication “REPEAT

A-” on the screen. Press A-B button again at

where you want to stop the repeat portion,

and there is indication “REPEAT A-B”. That

means the repeat function start to play the

portion from A to B automatically. Press A-B

button third time, there is an indication “A-B

CANCEL”, that means you cancel this AB

repeat playback function.

For Super-VCD, VCD and CD discs,

repeat AB is the only function within the same

track. When playing the others, repeat A-B will

cancel automatically. For DVD discs, repeat

AB is the only function within the same title/

chapter. When playing the others, repeat A-B

will cancel automatically.

MP3/JPEG Playback

After loading an MP3/JPEG disc, it will start

to scan for stored MP3/JPEG folders. And then

It will display the MP3 contents automatically

(see interface below) and start to play the first

file (highlighted file).

1 2 3 4 5 6

1. Current folder

2. MP3 file playback

3. JPEG file playback

4. Video file playback

5. Current file

6. Scroll bar

• Press cursor buttons to highlight the

folders, files or mode selection.

• When play or pause with picture playback,

you could use cursor buttons to flip or rotate

the picture.

USB/SD/MMC operation

Insert a USB device or SD/MMC memory

card into the corresponding slot. Press INPUT

button to select DVD mode. In System Setup

menu, item SOURCE, select the needed

storage.

Please note that the last connected storage

is active by default. All operations with files

contained in USB/SD/MMC are the same as

operations with file discs as described above.

USB format supports 1.0 and 2.0. Capacity:

up to 250 Gb. For correct and satisfactory

operation, licensed SD/MMC memory cards of

famous brands should be used with this unit.

Avoid using memory cards of unknown brands.

SD/MMC capacity: up to 16 Gb.

DVD setting

Press SETUP button to enter the DVD setup

menu. Press / / / buttons to

move and select category (highlight) between

different submenu, then press OK button to

confirm. Press SETUP button again to exit the

setting menu.

In this manual, the Menu may be

different from your real TV’s screen shown.

Because this manual is just a sample to help

you operate DVD menu setting.

14

Operation

System Setup

SYSTEM SETUP

TV SYSTEM

SOURCE

TV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

• SOURCE

In this menu you can select storage for

playback Disc/USB/Card/Auto.

• TV SYSTEM

This menu enables you to set the picture

format for your TV/DVD between NTSC/PAL/

AUTO according to your request and local TV

system.

• TV TYPE

This menu enables you to select one of the

three aspect ratios: 4:3 PS/4:3LB/16:9.

4:3PS (Normal): Normal Pan and Scan is

used for most normal television broadcasts and

it is the default setting. It has an aspect ratio

of 4:3. If you select this setting when viewing a

DVD, the picture will fill the screen but you will

not see the left and right edges of the picture.

4:3LB (Normal): Normal Letter Box will

show the DVD in its original aspect ratio .So

depending on size of your television screen,

you could see black boards above and below

the picture.

16:9 (Wide): Choose this setting if you have

a widescreen television.

Playback screen size may vary

according to disc contents. For discs with 4:3

contents, using any mode would only display

4:3 screen. Screen ratio selection should be

according to the connected TV or display

aspect ratio.

• PASSWORD

The default setting is locked. No rating

selection or change password could be done.

To edit the Rating setting please enter default

password “0000” by number buttons, then

press OK button to confirm.

To change password you could input any 4

digit number when the lock is unlocked. Once

the 4 digit number is entered, that will be new

password.

• RATING

Playback for some discs with rating. You

could select the rating setting according to your

preference. Rating restriction divided in eight

different category from KID SAFE to ADULT.

• DEFAULT SETTING

Press OK button to restore factory default.

Language Setup

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

EXIT SETUP

You can choose the suitable language as

displayed menu on the screen.

Audio Setup

AUDIO SETUP

AUDIO OUT

TONE

EXIT SETUP

AUDIO OUTPUT

15

Operation

Select SPDIF/OFF, SPDIF/RAW or SPDIF/

PCM audio output mode.

TONE

Use CH+/CH- buttons to move the scroll and

adjust the tone.

Digital Setup

DIGITAL SETUP

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

DYNAMIC RANGE

When switch the compress mode to

“Dynamic Range”, adjust the compress ratio for

different effect: When selected FULL, the peak

signal value is smallest; When selected OFF,

the peak signal value is biggest.

DUAL MONO

You could select 4 different audio output

same as the menu displayed on the screen:

STEREO/MONO L/MONO R/MIX MONO.

16

General information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No picture, no

sound, and no

indicator light

The power cord is not plugged in.

Contrast, brightness, sharpness, color

and volume are all in the minimum

value or TV is in mute mode.

Plug the power cord in.

Alter the value of contrast,

brightness, sharpness, color and

volume.

Picture and

sound with

abnormity

Contrast and color are set improperly.

Color system is set improperly.

Sound system is set improperly.

Set the value of Contrast and color

properly.

Set the sound system properly.

Picture is spotted

or with snow

Signal source is low-grade or the

signal is in a lower quality.

Use the qualified signal cord.

Blue background No video signal or the signal cord is

improperly/not connected.

Connect the signal cord properly.

PC Picture is not

in the middle of

the screen

Picture is not well adjusted. Adjust H/V position manually to

adjust it.

No sound No audio signal or the signal cord is

im-properly/not connected.

Connect the audio signal cord

properly.

Set the sound system properly.

Disc cannot be

loaded

The unit already contains a disc. Remove the disc in the player then

put a new one.

Disc cannot be

read

The disc is inserted with a wring

side.

Insert the compact disc with the right

side.

Compact disc is extremely dirty or

defective.

Clean the disc or try to play a new

one.

The RC does not

work

Batteries are improperly installed or

exhausted.

Make sure the positive and the

negative polarities are correct.

Reattach the battery lid.

Replace the batteries.

Causes of interference

Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.

Local radiation however, can create disturbances, which visibly affect your picture. Proper

installations, a good aerial are your best safeguards against these disturbances.

• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or

receiving short-wave radio equipment.

17

General information

• DIATHERMY: Herringbone pattern

and partial picture loss can result from the

operation of diathermy equipment from a

nearby doctor’s surgery or hospital.

• SNOW: Weak TV signals from long

distant stations result in an instead picture

and give the effect of falling snow. An antenna

adjustment or antenna amplifier may be

needed.

• GHOST: Multiple image, caused by

TV signals reflected back from surrounding

buildings, hills, aircraft, etc. is minimized by

correct aerial positioning.

• CAR IGNITION: Nearby cars and electrical

motors can cause small streaks across the

picture or make the picture roll.

The LCD panel is a high technology

product with many thin film transistors that can

give you a fine picture details. Occasionally,

a few non-active pixels may appear on the

screen as a fixed point of blue, green, red,

black or white, please note that this does not

affect the performance of your LCD TV.

Accessories

1. LED TV 1 pc

2. Remote controller 1 pc

3. Power cord 1 pc

4. Stand installation sheet 1 pc

5. Batteries ААА 1,5 V 2 pcs

6. DC adapter 1 pc

7. Consumer information 1 pc

8. Warranty card 1 pc

9. Instruction manual 1 pc

18 19

General information Содержание

Specifications

Size (diagonal) 22” (55 cm)

Brightness 300 cd/m

2

Contrast 1000:1

Response time 5 ms

Resolution 1920 x 1080

Aspect ratio 16:9

Color system PAL, SECAM

Sound system DK, I, BG

Storage support CD-R/CD-RW, DVD-R/DVD-RW, DVD+R/DVD+RW/USB/

SD/MMC/MS

Format support DVD/SVCD/VCD/CDDA/MP3/HDCD/JPEG/

Kodak picture CD/MPEG4 (DivX)

NICAM STEREO 2 x 3 W

AV RCA in +

Coaxial out +

SCART +

PC audio input +

HDMI +

VGA +

Component (YUV) +

RF antenna +

Headphone out +

Russian and English OSD +

Progressive scan +

Digital comb filter +

Quantity of channels 199

Teletext +

Power supply (DC adapter) ~100 - 240 V, 50/60 Hz (12 V 5 A)

Power consumption 60 W

Electric shock protection class I

Unit dimensions 548 x 160 x 395 mm

Net/Gross weight 4.4 kg/6 kg

Warning: Specifications may be subject to change without notice for improvement.

Page is loading ...

Hyundai H-LEDVD22V2 User manual

This manual is also suitable for

Hyundai H-LEDVD22V2 User manual

in other languages

Related papers

Other documents