Akura ACLTDVD1921W User manual

Customer Help Line: 01422 263313

Opening Hours: Mon-Fri 8am-8pm, Sat 9am-4pm, Sun 11am-4pm

Or visit our website at www.ekey.co.uk

19” LCD TV / DVD Combi

Instruction Manual

ACLTDVD1921W

- -

2

- -

1

INDEX

Thank you for purchasing this 19” LCD DVD/DVBt combi television.

When unpacking please ensure you have the following items :-

TV set. Remote Control. 2 x “AAA” battery cells. Mains Adaptor. Mains

input connecting lead. AV lead. Stereo Audio lead. User Instruction

Manual. Quick Start Guide.

Dear Customer.

Before connecting the Tv, please read this book carefully, noting

Warnings and Safety information. Please keep this book safe for future

use.

LCD TV Operation.

1. Important Safety Instructions………………………………….2

2. Main Functions………………………………………………….4

3. Installing Remote control batteries……………………………4

4. Product Overview……………………………………………….5

5. Remote Control………………………………………………….7

6. Input Connections……………………………………………….8

7. Operating Instructions…………………………………………10

8. Teletext………………………………………………………….11

9. Menu Operations……………………………………………….13

10. DVD operation………………………………………………….16

11. User Help Guide………………………………………………..26

12. Disc care………………………………………………………..27

13. Mains plug wiring information…………………………………27

14. Product Specification…………………………………………..28

15. Wall Mounting…………………………………………………..28

LCD TV OPERATION

1- Important Safety Precaution

- -

3

- -

4

2- Main functions

3-

Fitting the Remote Control Batteries

1.User Safety Information

On/Off button. This button does not disconnect the Tv from the Mains Supply. To

disconnect from the Mains supply, unplug the mains adaptor at the wall socket.

Mains Adaptor. Do not use alternative mains adaptors. If using in a Mobile home

or Caravan, you may use a DC lead designed for such use. (Not supplied).

Do not trap or place objects on the mains wire.

Physical Damage. Should the Tv or Mains adaptor case become damaged or

faulty, do NOT attempt a repair, do not remove safety covers, there are NO

serviceable parts inside. Consult the Customer Help Line. Do not hit or drop the

Tv. The LCD screen contains many thousands of pixels which may become

damaged. This is not covered by warranty.

Water / Fire. Do not use the Tv in wet or damp areas, such as steamy kitchens,

bathrooms or near swimming pools. Should either the Tv or mains adaptor become

wet, or water enter the ventilation slots, disconnect from the mains supply and call

the “Help Line”. Do not disconnect from the mains supply with wet hands, this may

cause a fatal electric shock.

Do not place the Tv near naked flames, heaters or open fires.

Leaving the Tv. During thunderstorms, or when leaving the Tv for long periods,

such as holidays, unplug the Tv from the mains supply and the aerial lead (if using

an outdoor or communal aerial).

Placing The tv. Place on a firm stable surface such as a table. Do not face direct

sunlight. Do not block or cover ventilation slots, this may cause the Tv to overheat

and possibly cause a fire.

Cleaning. To clean the Tv use a soft damp cloth. For stubborn sticky stains use a

mild detergent solution. Do not use abrasive or petrol based cleaners, you will

irreversibly damage the LCD screen.

1. Receives Analog Tv signals.

2. Displays Teletext.

3. Plays DVD,CD, VCD discs

4. Displays CVBS, S-Video, VGA (analog) Scart, Audio L/R inputs.

5. Output. Audio (RF) PCM (coaxial)

6. Stereo loudspeakers. 2 x 3W nominal

7. Full function Infra red Remote Control.

Battery Safety and Disposal.

Do NOT break open or throw on a fire. Contact your local waste authority for correct disposal.

Do not mix battery types, such as Re chargable and Alkaline

Always replace as a pair.

Do NOT attempt to recharge Alkaline batteries, they will explode and cause injury.

- 5 -

4- Product Overview

- 6 -

Indicator Light Status

in standby mode.

(2) Illustration of Connector

ITEM BUTTON NAME FUNCTION DESCRIPTION

1

2

3

4

6

7

5

CH+

TV channel up

CH-

TV channel down

VOL-

Volume down

VOL+

Volume up

8

9

TV/AV

Select the input signals :DVD / TV / SCART / AV / S-VIDEO / PC

POWER

Switches the TV to standby and on again

REMOTE SENSOR

Infrared sensor for the remote control.

POWER INDICATOR

Show red in standby mode, show green when your TV is

sw itched ON.

VOL

CH

123456 7

9

8

10

MENU Enter into MENU / ENTER

DC

SCART

PC AUDIO

L

VIDEO

-

S

RF

COAXIAL

VGA R AUDIO

VIDEO

Connector Description.

RF.

TV aerial input connector. 75 Ohms unbalanced Tv aerial or RF interface input

S-VIDEO input

. Connect a S-Video source such as DVD player.

VIDEO input.

Connect a CVBS video input source such as TV games.

AUDIO L/R input.

Connect audio from CVBS or S-Video sources.

VGA Input.

Connect your PC (VGA) to use as a PC Monitor.

PC AUDIO input

. Connect your PC Audio output when using VGA.

SCART.

Multi connection Input and Output point. Standard connection to VCR/DVD and

Tv games.

DC input.

DC Supply input from Mains Adaptor 12V 3.2A or 12 V DC supply from

Mobile home or Caravan supply.

COAXIAL Output

. PCM Audio output to Hi Fi equipment.

When the unit is on, the indicator light turns green. The indicator light is red when the

TV is

12

13

11

12

13

/

...... ...... ...

- 7 -

5- Remote Control Overview

Remote control Illustration Keys description on the remote control

- 8 -

6- Connection between different input signals

A) Connect with PC signal

You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not

supplied).

1. VGA input (Remember to tighten the screws.)

2. PC Audio Input

Connection steps

˖

z Read the user guide supplied with your computer and ensure that it has a VGA connector;

z Make sure that the power of the LCD-TV and the PC are off;

z Connect a D type 15-pin VGA interface cable (not supplied) to the VGA video interface connector

on the PC. Then connect the other end to the VGA video interface connector on the back of the

LCD-TV. Tighten the screws on the VGA connectors once they are firmly connected;

z Turn on the power of the LCD-TV first, and then turn on the power of the PC;

z Press the TV/AV button to set the video input mode of the LCD-TV to “PC”;

z Our LCD-TV can support the resolutions list in table 2. If the resolution you want is not listed, the

LCD-TV may not display the image properly,

z Use the VOL- / VOL+ on the control panel or remote controller to adjust the volume.

Table 2

Resolution 640x480 800x600 1024x768 720x400

Horizontal frequency

ΰ

KHz

α

20-55 20-55 20-70 31.47

Vertical frequency

ΰ

Hz

α

60-85 60-85 60-75 70

Clock

ΰ

MHz

α

32.5-60 32.5-60 25-80 28.322

B) Connect to external AV devices using Composite and S-VIDEO inputs

1. DC input.

2. Left & Right Audio input.

POWER MUTE AUTO

P.MODE A.MODE DISPLAY NICAM

LCD

MENU

DVD

MENU

INPUT

ENTER

CH-

CH+

VOL-

VOL+

SIZE

SUBPAGE REVEAL

ZOOM

PROG

DVD

STEUP

ANGLE

INTRO

REPEAT

A-B

MIX

GOTO

SUB-T

SLOW

STEP

TITLE

AUDIO

:

9

8

7

;

/

4

3. VIDEO input

4. S-VIDEO input

POWER

Switch on LCD TV when at standby mode

MUTE

Press to mute the sound. Press again or press

VOL+ to unmute.

NUMBER BUTTONS

Press 0-9 to select a TV channel directly when you

are watching TV.

The channel changes

after 2 seco

nds.

To enter page number in teletext mode and

P.MODE

Press repeatedly to cycle through the available video

picture modes:

STANDARD

A.MODE

Press to cycle through the different sound settings:

-/--

Press this button to enter a program number for

multiple program channel such as 2-1,etc.

Returns to the previously viewed programme.

Press to select the NICAM modes.

MILD

THUMBSTICK( / / / / ENTER )

Allows you to navigate the on-screen menus and

adjust the system settings to your

preference.

LCD MENU

Brings up the LCD main menu to the screen in analogue

TV mode.

DVD MENU

Brings up the DVD main menu to the screen in

mode.

INPUT

Press to cycle through the input source in following:

TV

SCART

DISPLAY

Press to display the source and channel’s info

rmation.

CH+/-

Press to scan through or to select a channel.

VOL+/-

Press to increase / decrease the sound level.

DVD

INDEX

INDEX/

Request the index page.

SIZE

SIZE/

Change display size in teletext mode.

Reveal or hidden the hidden words.

SUBPAGE/ANGLE

Sub coded page access..

To switch the at the bottom of the screen.

TITLE

TEXT/BACKWARD

Switch On or Off the teletext mode.

AUTO/OPEN

Press

to

do

auto

configuration directly

SLEEP

dialogue

Hold On or Off for current page display

PLAY/PAUSEPLAY/PAUSE

Press to play or pause the DVD playing.

STOP/MIXSTOP/MIX

Press to stop the DVD playing.

SLOW/STEPSLOW/STEP

Press to slow / step the speed of DVD playing.

To display the setup menu of D

VD on the screen.

PROGRAMPROGRAM

To select the DVD program playback.

REPEATREPEAT

Repeat playback .

ABAB

Press to AB playback.

PERSONAL

FRESH

MUSIC

PERSONAL

THEATRE

VOICE

select the chapter in DVD.

DVD

SUB-T

Select the caption in DVD mode.

/Open the DVD door.

/DVD playing backward fast.

/Playing forward fast.

/DVD angle switch button

REVEAL/ZOOM

/DVD zoom button

/DVD skip backward button.

/DVD skip forward button.

EXIT

Exit menu mode.

NICAM/AUDIO

/Change audio mode:left-right-mono-stereo.

z

press the AUTO button to automatically adjust the picture.

TEXT HOLD INDEX

SLEEP

EXIT

HOLD/FORWARD

DVD SETUP

GOTO

INTRO

Lets you select amount of time before your TV turn

itself

off

Time/chapter play back button.

INTRO menu mode.

AV

S-VIDEO

PC-RGB

PC AUDIO

VGA

DC

L

VIDEO

R AUDIO

S-VIDEO

Switch to the teletext with mix mode.

- 9 -

Connection steps

˖

z Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video

connectors;

z Make sure that the power of the LCD-TV and the AV device are off;

z Connect a Composite video cable (supplied) to the yellow composite video connector input on the

back of the LCD-TV. Now insert the other end of the composite cable into the yellow composite

connector output on the AV device.

z Alternatively connect a S-Video Cable (not supplied, provide better image quality) to the S-Video

connector on the back of the LCD-TV. Now insert the other end of the S-Video cable into the

S-Video connector on the AV device;

z Connect the RCA audio cables (supplied, white and red connectors) from the AV devices’ RCA

audio output connectors to the RCA audio input connectors on the back of the LCD-TV;

z Turn on the power of the LCD-TV first, and then turn on the power of the AV device;

z Press the TV/AV button to set the video input mode of the LCD-TV to “S-VIDEO” mode or “AV”

mode;

C) Connect with TV signal

1. Antenna / 75  aerial input.

Connection steps

˖

z Make sure that the power of the LCD-TV is off;

z Connect an antenna cable (CATV) to the corresponding interface connector (75 Ө ANT) on the

back of the LCD-TV. Connect the other end of the antenna cable to the antenna connector on the

wall or on your digital cable / satellite receiver. Now you are able to view regular cable TV;

z Turn on the power of the LCD-TV;

z Press the TV/AV button to set the video input mode of the LCD-TV to “TV” mode. The channel

number appears in the top left side of the screen;

z You can use key CH + / CH - button or the number keys on the remote control to select the

channel you want to watch;

D) Connect with SCART signal

- 10 -

7- Basic operating instructions

Turn on the LCD-TV

When the Power button is pressed and the LCD-TV is turned on, the indicator

light on the front of the LCD-TV changes from red to green. When the LCD-TV

is turned on, the input mode is displayed on the screen. When the LCD-TV is

turned off using the Power button, the LCD-TV will go into standby mode and

the indicator light turns red.

Note:Whe display of the input mode will disappear in 3 seconds.

Switch Among Different Inputs: TV/ DVD/ SCART/ AV/ S-VIDEO/ PC-RGB

Press the TV/AV button to select the input mode you want.

Each time you press the TV/AV button,

will appear on the screen in the order.

Note:

The display of the input mode will disappear in 3 seconds.

 

                   

Audio control

1. Press the VOL+ button to increase the volume. A number will appear

on screen indicating the volume level.

2. Press the

VOL-

button to decrease the volume. A number will appear

on screen indicating the volume level.

Mute

1. Press the MUTE button to mute the sound temporarily. A Mute icon

appears on the screen.

2. Press the MUTE button again to restore the sound. The Mute icon

disappears.

Note

˖

When you turn the LCD-TV off, the mute function is canceled automatically.

TV/ DVD/ SCART/ AV/ S-VIDEO/ PC-RGB

SCART

TV

SCART

S

-

VIDEO

AV

PC-RGB

DVD

Connection steps

˖

z Read the user guide supplied with your AV devices and ensure that it has a scart connector;

z Make sure that the power of the LCD-TV is off;

z Connect a SCART cable to the corresponding interface connector on the back of the LCD-TV;

z Turn on the power of the LCD-TV;

z Press the TV/AV button to set the video input mode of the LCD-TV to “SCART” mode;

SCART inpu t

- 11 -

Select the TV channel you want

You can use the number keys on the remote control to directly select TV channels.

The LCD-TV can store up to 99 channels (1 to 99), and you can press the keys on the remote control

or on the panel to make a selection.

1- Press the relevant key on the remote control if you want to

choose any channel from 1 to 9.˄for example: if you want to

choose channel 8, just press the key number 8.˅

2- If you want to choose a channel bigger than 9, please press the

“-/--” button until “- -” is indicated on the screen. Enter the two

digits of the channel number you want to watch.˄for example:

select channel 16˅

3- If you want to choose a channel bigger than 99, please press the

“-/--” button until “- - -” is indicated on the screen. Enter the three

digits of the channel number you want to watch.˄for example:

select channel 116˅

NICAM

Usually set to stereo to provide the best reproduction, but if reception deteriorates or if the service

is not available then switch to Mono.

Mono(M1) and (M2) can also be selected if a mono signal is being transmitted.

NICAM Button

Press NICAM to switch sound mode.

8- TELETEXT

Teletext features may vary depending on the Broadcasting Companies and is only

available if the channel selected is transmitting Teletext. Pressing the Picture

button whilst in Teletext operation will switch the current status to TV. When in

Teletext mode, the volume may still be altered to the desired listening level.

- 12 -

Press Reveal to reveal hidden words e.g. quiz page answers. Press again to hide.

Red/Green/Yellow/Blue Buttons

Fast Text operation. Press the required colour button to jump to the section required quickly.

HOLD Button

Press HOLD to retain the Teletext page when viewing multi-page information

Press again to return to automatic page update.

INDEX Button

Press INDEX to return to the main index page.

Depending on the way information is transmitted, this may have to be pressed more than once to return to the

main index page.

SUBPAGE Button

When Teletext information exceeds more than one page, it may take some time for the automatic changing of the

sub pages to reach the sub page you require.

It is possible to enter your required sub page and continue watching the normal programme until the correct sub

page is found.

Select the required page number using buttons 0-9.

If the top of the page indicates that sub pages are being transmitted yet the page does not change, then the

number at the top of the page is there indicate that the broadcaster has updated the page’s contents, there are

no sub pages.

Press SUBPAGE, page number/---- will be displayed at the Bottom right of the screen.

Enter desired sub page number before the page number/---- disappears. To select page 6 enter 0,0,0 and 6.

Text Button

Press TXT one time to enter Teletext mode and only the text page can be visible.

Press TXT two times to enter Teletext mode and both the TV picture and text page can be visible.

Press TXT three times to leave Teletext mode

9- Menu operations

Input mode PC

1- Press MENU button to either display the “PC” or “GENERAL” or “AUDIO” menu.

2- Press CH+ / CH- buttons to scroll through the parameters

3- Press VOL- / VOL+ buttons to make changes to the parameters

4- Press the EXIT button to exit the menu .

You can modify certain parameters of the LCD-TV in the menu system. Please read the following

descriptions to get an understanding of each adjustable parameter.

SUBPAGE REVEAL

ZOOMANGLE

:

9

8

7

;

/

4

SIZE

PROG INTRO

REPEAT

A-B

GOTO

SUB-T

SLOW

STEP

TITLE

TEXT HOLD INDEX

SLEEP

EXIT

MIX

CH=/CH- Selection

CH+/CH- will advance or reverse the page number by one, with each

press of the button.

Page numbers can be entered directly using the numeric buttons.

Size button. Press SIZE to change the display magnification. : Normal

=> Enlarged upper screen => Enlarged lower screen => Normal.

Reveal button

- 13 -

Name of menu Picture of menu Instructions

PC MENU

GENERAL MENU

AUDIO MENU

- 14 -

Input mode AV /S-Video / SCART / DVD:

1- Press MENU button to either display the “VIDEO” or “GENERAL” or “AUDIO” menu.

2- Press CH+ / CH- buttons to scroll through the parameters.

3- Press VOL- /VOL+ buttons to make changes to the parameters.

4- Press the MENU button to exit the menu.

Name of menu Picture of menu Instructions

VIDEO MENU

GENERAL MENU

AUDIO MENU

1. Brightness : Adjusts the brightness of

the picture, the image becomes brighter

as the number increases.

2. Contrast : Adjusts the contrast of the

picture, the image increases in contrast

as the number increases.

3. Colour setting : Select between

9300k / 6500k and user define.

4. Auto Config: Auto adjusts the H / V

position, Clock and Phase automatically.

Use this in most cases.

5. H-Position : Adjusts horizontal

position.

6. V-Position : Adjusts vertical position.

7. Phase : Removes any horizontal

distortion and sharpens the displayed

characters.

8. Clock : Adjusts the TFT/LCD to match

the input source.

General Menu

1. Language : Selects the OSD

language. Chose between English,

French, German, Spanish, Italian and

Portuguese.

2. Blue Screen : Displays a blue screen

in “No Signal” conditions.

3. Noise Reduction : Reduces the noise

of the picture in certain conditions.

4. Input Source. Displays the current

input source, and selects the alternative

inputs with each press of the > button.

6. Reset : Resets the Tv to “factory

default”.

Audio Menu.

1. Volume : Adjusts the volume level.

2. Balance : Adjusts the balance between

Left and Right audio channels.

3. Audio Preset : Four different settings.

Personal , Voice, Music, Theatre.

4. Treble : Adjusts the audio treble level.

5. Bass : Adjusts the audio bass level.

Note items 4 and 5 can only be set in

“

Personal mode

”

.

Picture Menu

1. Brightness

number increases.

2. Contrast

increases.

3. Colour. Adjusts the colour saturation.

4. Sharpness : Adjusts the level of detail

: Adjusts the brightness

of the

picture, the image becomes

brighter as the

: Adjusts the contrast of the

picture,

the image increases in contrast

as the number

enhancement. ( Not available in DVD

mode).

General Menu

1. Language

Italian and Portuguese.

2. Blue Screen

Signal” conditions.

3. Noise Reduction

picture in certain conditions.

4. Input Source

each press of the > button.

6. Reset

: Selects the OSD language.

Chose

between English, French, German

, Spanish,

: Displays a blue screen

in “No

: Reduces the noise

of the

. Displays the current

input

source, and selects the alternative

inputs with

: Resets the Tv to “factory

default”.

Audio Menu.

1. Volume : Adjusts the volume level.

2. Balance

and Right audio channels.

3. Audio Preset : Four different settings.

Personal , Voice, Music, Theatre.

4. Treble : Adjusts the audio treble level.

5. Bass : Adjusts the audio bass level.

mode”.

: Adjusts the balance

between Left

Note items 4 and 5 can only be set in

“Personal

Input mode: TV

1- Press MENU button to either display the “VIDEO” or “TV” or “GENERAL” or “AUDIO” menu.

2- Press KEY CH+ / CH- to scroll through the parameters.

3- Press VOL-/ VOL+ buttons to make changes to the parameters.

4- Press the EXIT button to exit the menu.

FULL

5. ZOOM : 16:9 and 4:3 State Transition

ZOOM FULL

Z OOM

- 15 -

Name of menu Picture of menu Instructions

VIDEO MENU

TV MENU

Basic operation

1. Turn ON and OFF the DVD function

- Turn on the LCD TV and then press INPUT repeatedly to select DVD mode.

2. Inserting DVD disc

3. Play the DVD

- According to the disc content, the disc menu will display for your selection. When playing the disc, you may use button

to toggle between Play and Pause mode. This product also supports Menu, Ti tle , Sequential and Program playback.

4. Menu playback (for DVD

discs)

- Press DVDMENU button

For DVD discs, the screen will display the DVD Disc Menu (Root Menu)

- For DVD discs, use the navigation buttons to select and Play the highlighted contents;

- Press ENTER or button to start from the highlighted content.

- Return to the Root Menu when playing the disc

For DVD discs, press to display the Disc Menu.

- STOP

10- DVD Operation

DVDMENU

- 16 -

Picture Menu

1. Brightness : Adjusts the brightness of

the picture, the image becomes brighter

as the number increases.

2. Contrast : Adjusts the contrast of the

picture, the image increases in contrast

as the number increases.

3. Colour. Adjusts the colour saturation.

4. Sharpness : Adjusts the level of detail

enhancement. ( Not available in DVD

mode).

Tuning Menu.

1. Channel : Displays the current channel and

select using the ◄/► buttons.

3. System : This sets the “Sound standard” of

the country you are in. The TV is “defaulted” to

“I”. Other systems available are :- B/G “western

Europe”, D/K “eastern Europe”. To change use

the ◄/► buttons.

4. Skip : Select the channel you want to skip as

in (1). Select “Skip” and then turn “on or off”

using the ◄/► buttons. When “on” a channel is

skipped, using the CH+/CH- buttons, however

the station can still be selected using the

numeric buttons.

5. AFC : “Auto frequency control”. Leave turned

“ON” It will “auto turn off” when tuning.

6. Fine Tune : In unusual circumstances the

sound or picture may be improved. Turn the

AFC “off” to adjust Fine tune.

7.SWAP : When “Auto Searching” the stations

should be placed into the correct locations

automatically, eg :- BBC1, BBC2, ITV,CH4,

CH5. In certain circumstances this may not

happen. To “swap” locations, select SWAP then

press ►. Select “From” and use the ◄/►

buttons to select the number you wish to move

from. Select “To” with the ▼/▲, and use the

◄/► buttons to select the number you wish to

move to. Select “SWAP” and press ►. The

station will now move to the new location. The

station in the “To” location, will now move to the

“From” location (swap). If all the stations need

re locating, start with the “lowest To” number,

locate BBC1 in the “From” section. Select “To”

and adjust to “1”, with the ▼/▲ buttons. Select

“Swap” and press ►. Press ► again to return to

the Swap menu. Continue until all stations are

in the correct order.

8. Manual Search : In certain circumstances

a station may be missed in “Auto Search”, or

another station may need to be added.

Select “Channel” and “input” the location

number required. Select “Manual Search” and

press ►. You will be asked to chose “Up” or

“Down”. Use the ◄/► to select and press

“Enter”. The Tv will now start to search. When

the Tv finds a station it will stop, if this is the

correct one, let the menu “time out” and the

station will be stored. If it not the correct

station press the Up/Down selection again

and continue until the correct station is found.

9. Auto Search : Select “Auto Search” and

press ►. The Tv will now search the entire

bands. When complete the Tv will display the

station stored in location 1. Sometimes the Tv

will store a poor station, in location 1, this is

when the “Manual Search” will be needed.

Insert the DVD/CD disc into the slot with the Label facing “AWAY” from you “shiny side forward”. The player will load the disc

automatically. There will be an on screen notice indicating “CLOSE” and then “READ”. After loading the disc content, the

player will start playing automatically. If there is already a disc inside the player, do NOT attempt to put another disc inside.

Note :- With some discs, after loading the contents of the disc, you may need to press “Play” or select from the Disc menu.

IMPORTANT :- Ensure the disc is loaded correctly, with the shiny side facing forward. If playing a dual side disc, ensure the

title you want to play is facing away from you..

TV MENU

CHANNEL NAME

********

CHANNEL

6

2. Channel name:Show that the current channel.

GENERAL MENU

AUDIO MENU

General Menu

1. Language

Italian and Portuguese.

2. Blue Screen

Signal” conditions.

3. Noise Reduction

picture in certain conditions.

4. Input Source

each press of the > button.

6. Reset

: Selects the OSD language.

Chose

between English, French, German

, Spanish,

: Displays a blue screen

in “No

: Reduces the noise

of the

. Displays the current

input

source, and selects the alternative

inputs with

: Resets the Tv to “factory

default”.

Audio Menu.

1. Volume : Adjusts the volume level.

2. Balance

and Right audio channels.

3. Audio Preset : Four different settings.

Personal , Voice, Music, Theatre.

4. Treble : Adjusts the audio treble level.

5. Bass : Adjusts the audio bass level.

mode”.

: Adjusts the balance

between Left

Note items 4 and 5 can only be set in

“Personal

5. ZOOM : 16:9 and 4:3 State Transition

ZOOM FULL

PROGRAM

T C T C T C

1 : 5 : 9 :

2 : 6 : 10 :

3 : 7 :

4 : 8 :

11 :

12 :

PLAY CLEAR

1

PLAY CLEAR

5 9

14

2 6

10

15

3 7

12

16

4 8 13

11

DVD/ Digital Audio/JPEG discs

CD /CD-G/ D-CD discs

- According to the highlight area input the title and chapter number by numeric buttons, press button to start; or move

to the <PLAY> by navigation buttons, press ENTER button to start.

- While playing the program, you may press PROGRAM button to display the program menu for edit. To clear the program

by moving to <CLEAR> and press ENTER button. Or press button to end the program. When press button again,

the disc will

play by sequent.

- While playing the program, there will have an on screen indication “PRG PLAY” and the current title and chapter number.

Supporting DVD format

This products can play the following format of disc.

Disc Type

Disc Size (Diameter) Recorded Tim e

Recorded Content Remarks

DVD 12cm

Single side:120mins. Approx

Double side:240mins. Approx

DVD format:

Compressed digital

audio and video

DVD-R

12cm

120mins.

Approx

Compressed digital

audio and video

CD

12cm

74mins. Approx CD-DA: Digital audio

HD-CD

12cm

74mins. Approx

HD-DA: Digital audio

12cm

600mins. Approx

Digital audio

NOTE: Also support DVD-RW,

CD-R, CD-RW playback.

Region Code 2

As it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes

and discs can have an optional region code. If you load a disc of a different region code into your player you will see

the

region code notice on the screen. The disc will not playback and should be unloaded. The region code for this player is 2

(refer to the symbols below).

ALL 4 1

2

1

2

3

4

DVD Functions operating instructions

1. Play

- For DVD disc, press button from root or title menu; while playing the DVD, you may play your favorite title directly with

title selection by pressing the TITLE button.

- For CD, CD-G & HD-CD discs, while playing the disc, you may play your favorite tracks by numeric

buttons.

- For Digital Audio / JPEG disc, you may play your favorite tracks by numeric buttons from the content menu.

- If input track number is not valid, it will not function.

NOTE: From track 1-10, use numeric buttons directly; For tracks over 10, press - / -- button first. (E.g. Tra ck 15, press - / --

then 5)

2. Previous/Next

- While playing the disc;

Press button to play to the last Tit le / Chapter / track.

Press button to play to the next Tit le / Chapter / track

If the current track is the first one, press button will stop the playback.

If the current track is the last one, press button will stop the playback.

- For DVD discs, the above functions may vary due to different DVD disc's structure.

3. Forward/ Backward

- While playing the disc, you may use forward or backward function.

- There are 4 speeds for forward. Press button to toggle between different speeds in sequent. (FORWARDx2 /

FOR WAR Dx 4 / FORWARDx8 / FORWARDx20 / Play).

While in backward, you may press to resume normal speed.

For CD, HD-CD, Digital Audio, backward also has audio output.

For DVD discs, if backward to first title / chapter, it will start from the beginning.

NOTE:

During Forward or Backward, the sound will be off.

4. Slow motion(for DVD discs)

- While playing the disc, you may use slow motion function.

There are 6 speeds for slow motion. Press button to toggle between different speeds in sequent. (SF1/2, SF1/3,

SF1/4, SF1/5, SF1/6, SF1/7, Play).

While in slow motion, you may press to resume normal speed.

NOTE: During Slow motion, the sound will be off.

5. Pause

- FOR CD, CD-G, HD-CD & Digital Audio/JPEG discs, press button to pause; press button to resume.

- FOR DVD, press button to pause; press button to playback frame by frame; press button

to resume.

6. Repeat

- Press REPEAT button once to display the current repeat mode.

For CD, CD-G, HD-CD, discs, while playing in sequent, you may use the repeat playback.

There are 2 repeat modes, press REPEAT to toggle between different modes in sequent. OFF, 1,

/REP: ALL).

For DVD discs, you

may setup the repeat playback mode. There are 3 repeat modes, press REPEAT to toggle between

different modes in sequent. (REP: OFF / REP: CHAPTER / REP: TITLE / REP: ALL).

7. Display

- Press button to activate the on screen roll-down menu for the current Title, Chapter, time and other information

Display

- 17 -

- 18 -

DVD+RW,

DVD+R,

For DVD discs,

For discs,

press REPEAT to toggle between different modes in sequent. (REP:

OFF/ REP:

1/

REP:

DIR

/REP:

(REP:

/REP: ALL).

/ JPEG

[ ]

PROGRAM

[ ]

Digital Audio

/JPEG

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

Digital Audio

5. Tit le playback (for DVD disc only)

- Press TITLE button, there will have an on screen indication “TITLE”.

- Press the direction or numeric buttons to select your favorite title.

- Then will play from the first chapter of the selected title.

6. Sequential playback (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

- For DVD discs,

press button will enter the disc menu.

For others, while it stopped, press button to start in sequent.

7. Program playback

- Using Program playback, you can select max. 16 tracks from the disc to playback in programmed order.

- OSD for program playback as below.

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

Press button once to stop. Press button to resume from where you stopped.

Press button Twice to stop. Press button to start from beginning.

In order to protect the disc, press button then press EJECT button to take the disc out. When the disc is ejected, hold

the disc edge slightly and take it from the eject direction

to prevent scratches.

When not using the DVD function (in stand-by mode or using others modes for a long time), please take out the disc to

protect the DVD loader and the disc.

For DVD discs, (2 pages) Press button once to display first page as shown below:

DVD

TT

/ CH 1 /1 2

Disc Type Chapter -/-(Current/Full) Elapsed disc time

Tiltle -/- (Current/ Full)

Press button again to display second pages shown below:

Audio Language Audio Type Angle ON/OFF

-/- (Current/ Full)

or OFF Subtitle -/-(Current/Full)or OFF

1 / 1 2CH OFF

Press button again to turn off the on screen display.

For CD, CD-G, HD-CD, / JPEG discs, Press button once to display first page: Disc type, Tr ac k -/-

(Current

/ Full), Mute status, Repeat mode status, Current track time.

- Press button again to turn off the on screen display.

8. Goto

- This function allows you to play your favorite Titl e / Chapter / track. Press GOTO button to activate the on screen scroll-

down menu for edit. According to the highlighted area, input your favorite Ti tl e / chapter / Tra ck number by numeric buttons

or input the playback

time. After editing, press ENTER to start. If the input is invalid, it will not function.

9. PREVIEW

- For DVD discs, while the disc had stopped, press PREVIEW button.

The screen will split to 9 small displays to play each track by 3 sec. according to the tracks order.

Press

/ button to navigate the 9 small screens.

Press button to playback the current selection.

Press 1 - 9 button to activate corresponding small screen directly.

- For CD, CD-G, DTC-CD, HD-CD discs, while the disc had stopped, press PREVIEW button. It will start to play each track

by 15 sec. according to the tracks order.

Press numeric buttons directly to select the tracks for preview

Press button to playback the current track

While playing

the discs, you may also press PREVIEW button to activate this function.

NOTE: - If started the disc menu, preview will not function.

- if the current track started over 15 sec. this function will start from next track.

10. AUDIO

- Press AUDIO button once to display current audio mode.

- Press again to toggle between different audio modes in sequent.

For DVD discs: (1 - 2 - 3 - 4)

For CD, CD-G, HD-CD, Digital Audio discs: (Stereo - L - R)

Note: Switching to Auto L / R audio channel may be varied due to different discs contents. Bilingual

DVD

discs can use

AUDIO button to switch between different languages.

11. Language (for DVD discs)

- Press AUDIO button once to display current language.

- Press again to toggle between different languages mode in sequent.

NOTE: For Multi-languages DVD discs, press AUDIO button to select your favorite language.

12. Subtitle (for DVD discs)

- Press SUBTITLE button once to display current sub-title.

- Press again to toggle between different subtitle modes in sequent.

NOTE: For Multi-languages subtitle DVD discs, press SUBTITLE button to select your favorite subtitle

language.

13. Angle (for DVD disc )

- Press ANGLE button once to display current playback angle.

- Press again to toggle between different playback angle codes in sequent. (E.g. Angle -/- (Current/Full) or OFF)

NOTE: Only for DVD with multi-angle, press ANGLE button to select your favorite playback angle. Selectable playback

angle depends on the availability of the DVD contents.

14. Mute

- Press MUTE button to mute the audio output. There will have an on screen symbol indicate “MUTE”.

- Press again to cancel, or Press VOL + to cancel and adjust the volume.

- In case there is no audio output, try to press MUTE button to cancel mute.

15. ZOOM (for DVD/ Digital Audio and JPEG discs )

- Press ZOOM button to zoom in the picture.

- There are 6 zoom modes, press ZOOM button to toggle between different zoom modes in sequent. (Zoom2 - Zoom3 -

Zoom4 - Zoom1/2 - Zoom1/3 - Zoom1/4 - Zoom OFF)

- In Zoom2-4, you may use the navigation buttons to

pan the picture for your favorite portion.

16. Repeat A- B

- In normal Playback, fast forward or fast reverse, press A-B button at where you want to start the repeat portion. There will

have an on screen indication “REPEAT A “.

- In normal Playback, fast forward or fast reverse, press A-B button again at where you want to stop the

repeat portion.

There will have an on screen indication “REPEAT A B“.

- The repeat function started to playback the portion from A to B automatically.

- Press A-B button again to cancel. There will have an on screen indication “A B CANCEL”.

For

CD/HD-CD/Digital Audio

discs, repeat A-B is only function within the same track. When playing the others, repeat

A-B will cancel automatically.

For DVD discs, repeat A-B is only function within the same Tit le /Chapter. When playing the others, repeat

A-B will cancel automatically.

17. Volume

- Press - VOL / VOL + buttons to adjust the output volume.

NOTE: Playback DVD discs in original code, is not adjustable

Digital Audio/JPEG Playback

After loading the

Digital Audio

/ JPEG disc, it wil start to scan for the stored Digital Audio /JPEG folders. Then will firstly display

the

Digital Audio

contents automatically and start to play the first file (highlighted file).

Screen as follow:

Display current

Digital Audio

playback

function

Highlight file for

current playback.

Buttons for switching

between

and

JPEG

playback

function.

Scroll bar to view

next page.

Display

- 19 -

- 20 -

Display

61 00:03:37

OFF

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

(for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs

)

Display current

Digital Audio

playback

function

Digital Audio

- Using the navigation buttons to check your favorite folder and playback the first file or move to your favorite file.

NOTE:

- Press ◄ ► buttons to move the highlight to folders, documents or mode selection.

- Press numeric buttons to select the contents directly. For number over

10, press -/-- button first. (e.g. File number 15,

press -/-- then 5.)

- When playing back Digital Audio files, there is a list of files displayed.

- Playing the JPEG discs, press PROGRAM button to select slide effects. There are 17 slide modes, press PROGRAM

button to toggle

between different modes in sequent. (Start from top Start from bottom Start from left Start from right

Start from upper left corner Start from upper right corner Merge from left / right Horizontal blades Vertical blades Merge

form 4 corners Random Playback Slide effect

OFF).

- When play or pause with picture playback, you may use navigation buttons to flip / rotate the picture.

▲ button to flip horizontally.

▼ button to flip vertically.

◄ button to rotate left 90˚.

► button to rotate right 90˚.

- When play or pause with picture playback, you may use D.MENU button to enter preview mode to dislay 12 pictures.

Press / button to select next / previous page or press numeric buttons to view the corresponding pictures.

- The maximum JPEG image size that can be displayed is 1280 x 1024.

Function Settings

DVD Function General setup

- Press DVD SETUP button to activate the DVD player OSD

menu;

- Press ◄ / ► button to move and highlight between

different sub-menu. Press ▲ / ▼ ENTER button to enter

the highlighted sub-menu.

- Press button to exit the OSD menu.

NOTE: In Setup mode, the following functions will be cancel or pause :

TITLE, SUB-TITLE, DISPLAY, PLAY, STOP, SLOW / STEP, AUDIO, FF, FR, PREV, NEXT, GOTO,

ZOOM, ANGLE, PROGRAM, PREVIEW, REPEAT, REPEAT A-B.

System Setup

NOTE: PAL format is generally used for TVs in the UK.

Check your TV user guide for supported formats.

If NTSC is selected with a non-compatible television

you

may experience interference or picture scrolling.

TV color system

This menu enables you to set the picture format for your DVD

NTSC

This format is used by some other countries, e.g. USA

PAL

This is the format used in the UK and the default setting.

AUTO

This format can be used if your DVD

is capable of both PAL and NTSC formats.

TV Type

DVDs are produced in a variety of screen aspect ratios. This menu enables you to select one of the three aspect ratios:

4:3 PS (Normal)

4:3 LB (Normal)

16:9 (Wide)

- Select the most appropriate aspect ratio for the DVD

being

viewed.

4:3PS (Normal)

Normal Pan and Scan is used for most normal television broadcasts.

It has an aspect ration of 4:3. If you select this setting

when viewing a DVD,

the picture will

fill the screen but, you will not see the

left and right edges

of

the picture.

SYSTEM SETUP

TV SYSTEM

TV TYPE

PASSWORD

RATING

RESUME

DEFAULT

SYSTEM SETUP

TV TYPE

PASSWORD

RATING

RESUME

DEFAULT

TV SYSTEM

AUTO

NTSC

PAL

SYSTEM SETUP

PASSWORD

RATING

RESUME

DEFAULT

TV SYSTEM

4:3PS

4:3LB

TV TYPE

- 21 -

- 22 -

DVD SETUP

16:9

NOTE: Only editable when password is unlocked. And only

can function when password is locked. It does not,

however, reset either the Password or the Rating

setting.

Default Setting

- Press

ENTER button to restore factory default.

Teletext

operation

Teletext operation

4:3LB (Normal)

Normal Letter Box will show the DVD in its original aspect ratio so depending

on the size of your television screen, you may see black borders above and

below the picture.

16:9 (Wide)

Choose this setting if you have a widescreen television.

NOTE:

- Playback screen size may vary according to the discs contents.

- For discs with 4:3 contents, using any mode would only display a 4:3 screen

- Screen ratio selection should be according to the connected TV / Display

aspect ratio.

PassWord

- The default setting is locked. No Rating

selection or change password could be done. To edit the Rating setting, please

enter default password “0000” by numeric buttons, then press ENTER button to confirm.

- To change password, input any 4 digit number when the lock is unlocked. Once the 4 digit number is entered, that will

be

your new password.

Rating

- Playback for some discs with rating, you can select the rating setting according to your preference. Rating restriction

divided in eight different category from KID SAFE to ADULT.

Language Setup

Press DVD SETUP button to enter the DVD OSD menu.

- OSD Language

Use navigation buttons to select the OSD LANGAUGE setup

icon, press ENTER button to confirm. There are 6 languages

for your selection, press ▲ & ▼ buttons to toggle between

different languages

ENGLISH / GERMAN /PORTUGUESE/

FRENCH /ITALAN / SPANISH.

Press

ENTER

button to confirm.

- Audio Language

Use navigation

buttons to select the AUDIO LANG setup icon, press ENTER button to confirm. There are 8 languages for

you selection, press ▲ & ▼ buttons to toggle between different languages. (ENGLISH / FRENCH / SPANISH / PORTUGESE

GERMAN / LATIN / JAPAN / CHINESE ). Press ENTER button to

confirm.

NOTE: If the selected language is not included in you DVD disc content, it will select the default language of the disc

automatically. The default language setting is English.

SYSTEM SETUP

RATING

RESUME

DEFAULT

TV SYSTEM

----

TV TYPE

PASSWORD

SYSTEM SETUP

PASSWORD

RESUME

DEFAULT

TV SYSTEM

3 PG

1 KID SAFE

2 G

TV TYPE

RATING

6 R

4 PG13

5 PG-R

7 NC-17

8 ADULT

SYSTEM SETUP

PASSWORD

TV SYSTEM

TV TYPE

RATING

RESTORE

RESUME

DEFAULT

MENU LANG

OSD LANGUAGE

AUDIO LANG

LANGU. SETUP

FRENCH

ITALIAN

ENGLISH

GERMAN

PORTUGUESE

SPANISH

SUBTITLE LANG

MENU LANG

OSD LANGUAGE

AUDIO LANG

LANGU. SETUP

OFF

SPANISH

ENGLISH

FRENCH

PORTUGUESE

SUBTITLE LANG

ITALIAN

GERMAN

- 23 -

- 24 -

it is the default setting.

MENU Language

- Use navigation buttons to select the MENU LANG setup icon,

press ENTER button to confirm. There are 8 languages for you

selection, press ▲ & ▼ buttons to toggle between different

languages. (ENGLISH / FRENCH/ SPANISH / PORTUGESE

GERMAN / LATIN /

Press ENTER button

to confirm.

Audio Setup

Audio Output

- Use navigation buttons to select the DOWNMIX setup icon,

press ENTER button to confirm.

- There are 3 modes for your selection; use navigation buttons

to select different modes, press ENTER button to confirm.

NOTE: If the selected language is not included in you DVD disc content, it will select the default language of the disc

automatically. The default language setting is English.

11- User Help Guide

OSD LANGUAGE

AUDIO LANG

LANGU. SETUP

ITALIAN

SPANISH

ENGLISH

FRENCH

PORTUGUESE

SUBTITLE LANG

GERMAN

OFF

MENU LANG

AUDIO SETUP

- 25 -

- 26 -

JAPAN / CHINESE)

NOTE: If the selected language is not included in you DVD disc content, it will select the default language of the disc

automatically. The default language setting is English.

- Subtitle Language

Use navigation buttons to select the SUBTITLE LANG setup icon, press

ENTER button to confirm. There are 7 languages

for you selection, press ▲ & ▼ buttons to toggle between different languages. (ENGLISH / FRENCH / SPANISH /

PORTUGESE/ GERMAN / / / OFF) Press ENTER button to confirm.

MENU LANG

OSD LANGUAGE

AUDIO LANG

LANGU. SETUP

SPANISH

ENGLISH

FRENCH

PORTUGUESE

SUBTITLE LANG

GERMAN

OFF

CHINESE

JAPAN

ITALIAN

If you are still having difficulty please call the Technical help line. Ring 01422 263313

(Normal rates apply).

Opening hours Mon-Fri 8 am – 8pm. Sat 9 am – 4pm. Sun 11am – 4pm “Bank holidays

as Sun”

Or try our website :- www.ekey.co.uk

(24Hr) Emails should be responded to within 3 - 4

hours should the consumer have difficulty getting through.

AUDIO SETUP

DOWNMIX

- Use navigation buttons to select the AUDIO OUT

setup icon,

press ENTER button to confirm.

- There are 3 modes for your selection; use navigation buttons

to select different modes, press ENTER button to confirm.

LT/RT

STEREO

VSS

AUDIO OUT

DOWNMIX

AUDIO OUT

SPDIF/OFF

SPDIF/RAM

SPDIF/PCM

14- Product specifications

Items Relevant illustrations

LCD 19.0 TFT LCD

Brightness 300cd/m2

Life-span of the screen backlight 50,000 hours

View angle

Horizontal view angle (L / R)˖ 80° / 80°

Vertical view angle (H / L)˖

PC input

Horizontal frequency˖20~70kHz

Vertical frequency˖60~85Hz

Resolution 1440 * 900

Compatible areas EUROPE

TV standard PAL SECAM BG DK I L/L’

Features

PC DB15 VGA input interface

AV video ǃS video Composite video input interfaceǃS video input interface

TV 75ȍ ANT.

Input interface

Audio

Audio 1 (leftǃright audio input interface)

Audio 2 (leftǃright audio input interface)

OSD language English, French,Spanish,Portugese,German,Italy

Accessories

Operating instructions

Remote control

AC power line

2AAA size batteries

Adapter

80° / 80°

SCART

CVBS/RGB signal in,CVBS signal out

12- Disc Care

13- Mains plug wiring

IMPORTANT

For your safety. If the mains plug needs replacing, proceed as follows :-

DO NOT CONNECT THE CENTRE PIN (EARTH).

Connect the Blue wire to the (N) terminal ( this may be coloured blue).

Connect the Brown wire to the (L) terminal adjacent to the fuse ( this may be coloured brown).

This appliance must have a 3A fuse fitted.

Number of channels 99

Audio Output 3W×2

Power supply AC 220V~ (110-240V~/50Hz)

The Tv is provided with mounting holes for a VESA approved wall mounting bracket (NOT

SUPPLIED). Remove the Two Posi screws holding the base to the base bracket and lift the

base away (do not remove the base mounting bracket). Mount the VESA bracket using 4x

4mm x 10mm Iso metric threaded screws (not supplied). Do NOT use screws longer than

12mm, damage will occur to the internal parts. Fit the wall bracket securely following the

manufacturers instructions.

Akura accept no responsibility for damage caused by faulty bracket installation.

15- VVall Mounting

- 27 -

- 28 -

Power consumption < 60W

Akura ACLTDVD1921W User manual

Akura ACLTDVD1921W User manual

Related papers

Other documents