![](//vs1.manuzoid.com/store/data-gzf/962d712c061af3bb618934163040e913/2/000513908.htmlex.zip/bg2.jpg)
2 DC400‐en‐GB_V2.007/15
Introduction
ThankyouforselectingtheExtechInstrumentsModelDC400clampmeterthatmeasuresupto
400ADC.Thisdeviceisshippedfullytestedandcalibratedand,withproperuse,willprovideyears
ofreliableservice.Pleasevisitourwebsite(www.extech.com)toregisterthemeterandtocheck
forthelatestversion
ofthisUserGuide.
Features
HighAccuracyandResolution
Large4000countLCDdisplay
Onetouch“AutoZero”
DataHoldandAutoPowerOfffunctions
30mm(1.2”)Jawdiameter
Safety
InternationalSafetySymbols
Thissymbol,adjacenttoanothersymbolorterminal,indicatestheusermustrefertothemanualfor
furtherinformation.
Thissymbol,adjacenttoaterminal,indicatesthat,undernormaluse,hazardousvoltagesmaybe
present
Doubleinsulation
SafetyNotes
Donotexceedthemaximumallowableinputrange.
SetthefunctionswitchOFFwhenthedeviceisnotinuse.
Removethebatteryifthedeviceistobestoredforlongerthan60days.
Neverdisposeofbatteriesinafire.Batteriesmayexplodeorleak.
Nevermixbatterytypes.Alwaysinstallnewbatteriesofthesametype.
Warnings
Setfunctionswitchtotheappropriatepositionbeforemeasuring.
Donotmeasurecurrentonacircuitwhosevoltageexceeds600V.
Cautions
Improperuse of this metercancausedamage,shock, injuryor death.Read and understandthisuser
manualbeforeoperatingthemeter.
Inspect the condition of the meter for any damage before operating the meter. Repair any damage
beforeuse.
Iftheequipmentisusedinamanner
notspecifiedbythemanufacturer,theprotectionprovidedbythe
equipmentmaybeimpaired.