Beta 1480 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Beta 1480 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
4
OPERATING INSTRUCTIONS
EN
KIT CONTENTS:
PSA
10 mm
connector
PSA
10 mm
connector
GM
Renault/GM/Fiat small
Renault/GM/Fiat big
Ford
PSA 10 mm
PSA 8 mm
Venturi
valve
Pump with
direction
indicator
Caution!: Always wear safety equipment before disconnecting the diesel oil pipes.
1480.indd 4 16/10/15 15:10
5
OPERATING INSTRUCTIONS
EN
Step 1
Disconnect the low-pressure diesel oil pipe.
NB: DURING THIS OPERATION THE VENTURI VALVE MUST BE CLOSED
If diesel oil can hardly be sucked, this operation can be performed by using a tyre-inflating gun
connected to the Venturi valve, which must be open.
Step 3
Connect the couplings.
Step 2
Select the correct connectors.
Step 4
Pump until diesel oil gets into the output
pipe.
The kit includes 2 universal conical
connectors and rubber hoses for cars
without quick couplings.
Pay attention to the arrow on the pump, so
that all the parts can be properly
connected.
1480.indd 5 16/10/15 15:10
BETA UTENSILI S.p.A.
via Alessandro Volta, 18 - 20854 Sovico (MB) ITALY
Tel. +39 039 20771 - Fax +39 039 2010742
www.beta-tools.com - [email protected]
1480.indd 20 16/10/15 15:10
/