Sony ILCE-6000LB Owner's manual

Interchangeable Lens

Digital Camera

: __'_'_'_ ..... Hel l) Guide" is an on-line manuah Rel)r to it for in-depth

{77 instructions on the many funclions o1'the camera.

, _'_,_ t (_) Access the Sony support page.

http://www, sony.net/Sonyh_l'o/Sul)port/

@ Select your country or region.

@ Search for the model name of your camera on the support

page.

• Check the model name on the bottom of your camera.

This camera is equipped with a built-in instruction guide.

MENU

In-Camera Guide

The camera displays explanations for MENU items and the setting x,alucs.

(_) Press the MENU button or the Fn (Function) button.

@ Select the desired item, then press the C2 button.

Shooting Tip

The camera displays shooting tips for the shooting mode selected.

(_ Press the C2 button in shooting mode.

@ Select the desired shooting tip, then press • on the control wheel.

The shooting tip is displayed.

• You can scroll the screen using IdY and change shooting tips using _1/_.

GB

2

Owner's Record

The model and serial numbers arc located on the bottom. Record the serial number in the

space provided below. Refer to these numbers whenever you call your Sony dealer

regarding this product.

Model No. IL(E-6()0{}

Serial No.

Model No. A(7-UB IOC/AC-UB I 0D

Serial No.

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

IMPORTANTSAFETYINSTRUCTIONS

-SAVE THESEINSTRUCTIONS

DANGER

TOREDUCETHERISKOFFIREORELECTRIC

SHOCK,CAREFULLYFOLLOWTHESE

INSTRUCTIONS

If the shape of tilt' plug does not fit the power outlut, use an attachment phlg adaptor of tilt'

proper configuration l\_r the power outlet.

Battery pack

If"tilt' baltery pack is mishandlud, lilt' batlery pack can bursl, cause a fire or evun chemical

bui-ns. Obserx e the following cautions.

• Do not disassemble.

• Do not crush and do not expose the bauery pack to any shock or force such as

hammering, dropping or slepping on il.

• Do not sllorl circuil and do not allow metal o[_jecls Io come inlo COll[acl with the batlery

terminals.

• Do nol expose Io high lemperalure above 60(7 (141} F) such as ill direcl sunlighl or in a

car parked in Ihe sun.

• Do not incinerate or dispose of ill fire.

• Do nol handle damaged or leaking lilhium ion balteries.

• Be sure Io charge the baltery pack using a genuine Sony baltery charger or a device that GB

can charge the ba/lery pack. 3

• Keep the battery pack out of the roach of small childr<.n.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

AC Adaptor

Use the nearby wall outlet (wall socket) when using the AU Adaptor. Disconnect thu A(

Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while

using the apparatus.

The power cord (mains lead), if supplied, is designed specifically lk_r use with this camera

only. and should not be used with other electrical equipment.

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batturies are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries, call

toll lYee

I-8{}0-822-8837. or visit http://www.call2recycle.org/

O

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

Battery pack and lens (If lens supplied)

This device complies with Part 15 of thu F(-T' Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interf<.mnce received, inchlding interference that may cause undesired operation.

CAN I(7ES-3 B/NMB-3 B

This equipment complies with F((/IU radiation exposur<, limits set forth for an

uncontrolled environment and meets the F((7 radio lYequency (RF) Exposure Guidelines

in Supplement C to OET65 and RSS- 102 of the IC radio frequency (RF) Exposur<. rules.

This equipment has very low levels of RF energy that are deemed to comply without

testing of specific absorption ratio (SAR).

GB

4

If you have any questions about this product, you may call:

Sony (ustomer lnfommtion (Tenter

1-800-222-SONY (7669)

The number below is for tile FCC related matters only.

Regulatory Information

Declaration of Conformity

Trade Nume: SONY

Model No.: IL(E-6/)00

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo.

San Diego. (A 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Patti 5 of the F(C Rules. Operation is sut_iect to tile

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

This equipment must not be co-located or operated in con]unction with any other antenna

or transmitter.

CAUTION

You arc cautioned thut any chungcs or modifications not expressly approved in this munuul

could void your authority to operate this equipment.

Note:

This equipment has bccn tested and fo/ind to comply with tilt' limits for a Ulass B digitul

device, pursuant to Part 15 of tile PCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses. and can radiate radio frequency

energy and. if not installed and used in accordance with the instructions, may cause

Imrmful interference to radio communications. However. them is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interl\.rence to radio or television reception, which can be determined by turning the

equipment off and on. the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate tile receiving antenna.

Increase the separation between tile equipment and receiver.

(7onnect the equipment into an outlet on a circuit different from that to which tile

receiver is connected.

Consult the dealer or an experienced radio/TV technician lk_r help.

Tile supplied interface cable must be used with tile equipment in order to comply with the

limits for a digital de_ice pursuant to Subpart B of Parl 15 of F((7 Rules. GB

5

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is su_iect to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that

may cause undesired operation of the device.

Notice for the customers in the countries applying EU Directives

Manufacturer: Sony Uorporation. 1-7-1 Konun Minato-ku Tokyo, 108-0075 Jupan

For EU product compliance: Sony Deutschland GmbH. Hedelfinger Strasse 61. 70327

Stuttgart, Germany

Hereby, Sony Corporation. declares that this equipment is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC. For details, please

access the following URL:

http://www.compliance.sony.de/

Notice

If static electricity or clectl-omagnctism causes duta transl\.r to discontinue midway (fail),

restart the application or disconnect and connect the communication cable (USB. etc.)

again.

This product has been tested and l\mnd compliant with the limits set out in the EM(

regulation for using connection cables shorter than 3 meters (9.8 feet).

The electromagnetic fields at the specific frequencies may infhlence the picture and sound

of this unit.

GB

6

Disposal of waste batteries and electrical and electronic

equipment (applicable in the European Union and other

European countries with separate collection systems)

This symbol on file product, file battery Ol-on file packaging indicates that

tile product and tile battery shall 11ol be treated as household wasle. On

certain baneries this sylnbol might be used in combination with a

chemical symboh The chemical symbols for mercury (Hg) or lead (Pb) are

added if the banery contains more than ().()005c/_ mercury or 0.004c/_ lead.

By ensuring these products and batteries am disposed of correctly, you

will help prevent potentially negative consequences for the environment and human health

which could otherwise be caused by inappropriate waste handling. The recycling of the

materials will help to conserve natural resources.

113case of products that for safety, performance or data integrity masons require a

pemmnent connection with an incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery and the electrical and electronic

equipment will be treated properly, hand over these products at end-of-life to the

applicable collection point for the recycling of electrical and electronic equipment. For all

other batteries, please view the section on how to remove the battery from the product

sal\,ly. Hand the battery over to the applicable collection point for the recycling of waste

batteries. For morn detailed information about recycling of this product or battery, please

contact your local Civic Office, your household waste disposal service or the shop where

you purchased the product or battery.

Complies with ]

IDA Standards

DB00353

Note

Son'_ecertification marks 17)1-standards supported by thc camera can bc confirmed on the

screen of the camera.

Select MENU --+ _ (Setup) 6 --+ [(ertificalion Logo].

If display is not possible due to problems such as camera failure, contact your Sony dealer

or local authorized Sony service facility.

GB

7

Table of contents

- Checking the supplied items

- Identifying parts

- Inserting the battery pack

- Charging the battery pack

- Inserting a memory card (sold separately)

- Attaching/removing the lens

- Setting the clock

- Shooting still images/movies

- Viewing images

- Introduction of other functions

- Features of PlayMemories Home TM

- Adding functions to the camera

'Ot_ers ,;, 'i::

- Number of still images and recordable time of movies

- Notes on using the camera

- Specifications

This manual covers several models supplied with diflerent lenses.

The model name varies depending on the supplied lens. The available model varies

depending on the countries/regions.

1LCE-6ttt)tt Not supplied

1LCE-6ttt)ttL El6 5(1mm

8 1LCE-6ttt)ttY E55 21(tmm and El6 5(tmm

Firstcheckthemodelnameofyourcamera(page8).Theaccessoriessupplied

difl)rdependingonthemodel.

Thenumberinparenthesesindicatesthequantity.

Supplied with all models

• Camera (1)

• Power cord (nmins lead) (1)* (not

supplied in the U.S.A. and Canada)

" Multiple power cords may be

supplied with your camera. Use the

appropriate one that matches your

country/region.

• Rechargeable battery pack

NP-FW50 (1)

• Eyepiece cup (1)

• Instruction Manual (this manual)

(1)

• Wi-Fi Connection/One-touch

(NFC) Guide (1)

This guide explains the functions

that require a Wi-Fi connection.

ILCE-6000

• Body cap (l) (attached to the

camera)

• Micro USB cable (1)

ILCE-6OOOL

• El6 50 mm zoom lens (1)

(attached to the camera)/Front lens

cap (1) (attached to the lens)

• AC adaptor AC-UB 10C/UB 10D

(1)

ILCE-6OOOY

• El6 50 mm zoom lens (l)

(attached to the camera)/Front lens

cap (1) (attached to the lens)

• E55 210 mm zoom lens (1)/Front

lens cap (1)/Rear lens cap (1)/Lens

hood (1)

• Shoulder strap (1)

GD

9

i<i

When the lens is removed

[] Lens

[] Mount

[] hnage sensor 2)

[] Lens contacts 2)

l) Do not cover this part during movie

recording.

2) Do not touch this part directly.

[] Shutter button

[] C1 (Custom 1) button

]Remote sensor

[] ON/OFF (Power) switch

[] Self-timer lamp/AF illuminator

[] Lens release button

[] Microphone 1)

GD

10

] ..............

i

J

[] Multi interface shoe 1)

[] -_- hnage sensor position mark

[] Hook for shoulder strap

[] Wi-Fi sensor (built-in)

[] Flash

• Press the ,_ (Flash pop-up)

button to use the flash. The flash

does not pop up automatically.

• When not using the flash, press it

back into the camera body.

[] Mode dial

i_ (Intelligent Auto)/

il_l + (Superior Auto)/

P (Program Auto)/

A (Aperture Priority)/

S (Shutter Priority)/

M (Manual Exposure)/

MR (Memory recall)/

[_ (Movie)/

(Sweep Panorama)/

sen (Scene Selection)

[] Control dial

[] Charge lamp

[] Multi/Micro USB Terminal 1)

• Supports Micro USB compatible

device.

[] HDMI micro jack

1_ For details on compatible

accessories for the multi interface

shoe and the Multi/Micro USB

Terminal, visit the Sony web site, or

consult your Sony dealer or local

authorized Sony service facility.

You can also use accessories that

are compatible with the accessory

shoe. Operations with other

manulacturers' accessories are not

guaranteed.

* Multi

_'_ _ Interface Shoe

GB

11

GB

12

[] Eye sensor

[] Viewfinder

[] Eyepiece cup

• Not attached to the camera at the

lactory. It is recommended that

you attach the eyepiece cup when

you intend to use the viewfinder.

Attaching/removing the

eyepiece cup

• Remove the eyepiece cup when

ou attach an accessory (sold

separately) to the Multi Interface

Shoe.

[] LCD screen

• You can adjnst the screen lo an

easily viewable angle and shool

from any position.

I]

"""_

]

[] Diopter-adjusmlent dial

• Adjust the diopter-adjustment

dial to your eyesight until the

display appears clearly in the

viewfinder. If it is difficult to turn

the diopter=adjustment dial,

remove the eyepiece cup and then

adjust the diah

[] _ (Flash pop-up) button

[] MENU button

[] For shooting: AEL button

For viewing: Playback zoom

[] MOVIE (Movie) button

[] For shooting:

Fn (Function) button

For viewing:

,_ (Send to Smartphone) button

• You can display the screen lot

[Send to Smartphone] by

pressing the _ (Send to

Smartphone) button.

[] Control wheel

[] C2 (Custom 2) button/

(Delete) button

[] )i,-] (Playback)button

[] Tripodsockethole

•Useatripodwithascrewless

than5.5mm(7/32inches)long.

Otherwise,youcannotfirmly

secure the camera, and damage to

the camera may occur.

[] Speaker

[] Access lamp

[] Battery/memory card cover

[] Memory card slot

[] Battery insertion slot

[] Battery eject lever

[] _ (N Mark)

• Touch the mark wizen you

connect tile camera to a

smartphnne equipped with the

NFC function.

• NFC (Near Field

Communication) is an

international standard of the

short-range wireless

communication technology.

[] Connection plate cover

• Use this wizen using an AC-

PW20 AC Adaptor (sold

separately). Insert the connection

plate into tile battery

compartment, and then pass tile

cord through tile connection plate

coyer as showu below.

• Make sure that tile cord is not

pinched when you close the

coyer.

GB

13

Lens

See page 43 on the specifications of

the lenses.

E PZ 16 - 50 mm F3.5 - 5.6

OSS (supplied with

ILCE-6OOOL/ILCE-6OOOY)

E55 - 210 mm F4.5 - 6.3

OSS (supplied with

ILCE-6OOOY)

[] Zooming/Focusing ring

[] Zooming lever

[] Mounting index

[] Lens contacts I )

I) Do not touch this part directly.

[] Focusing ring

[] Zooming ring

[] Focal-length scale

[] Focal-length index

[] Lens contactsl)

[] Mounting index

l) Do not touch this part directly.

GB

14

®

Battery eject lever

1Open the cover.

2Insert the battery pack.

• While pressing the battery qject lever, insert the baltery pack as

illustrated. Make sure that the battery ejecl lever locks after insertion.

• Closing the cover with the battery inserted incorrectly may damage the

cal]nera.

GB

15

For customers in the USA

and Canada

Power cord

(Mains lead)

For customers in countries/

regions other than the USA

and Canada

Charge lamp

Lit: Charging

Off: Charging finished

Flashing:

Charging error or charging paused

temporarily because the camera is not

within the proper temperature range

1Connect the camera to the AC Adaptor (supplied),

using the micro USB cable (supplied).

2Connect the AC Adaptor to the wall outlet (wall socket).

The charge lamp lights orange, and charging starts.

• Turn oft" the camera while charging the battery.

• Yeu can charge the battery pack even when it is partially charged.

• When the charge lamp flashes and charging is not finished, remove and

rc-inserl the battery pack.

• If the charge lamp on the camera flashes when the AC Adaptor is connected to the

wall outlet (wall socket), this indicates that charging is temporarily stopped

because the temperature is outside the recommended range. When the temperature

gets back within the appropriate range, the charging resumes. We recommend

charging the battery pack in an ambient temperature of between 10°C to 30°C

<50°F1o 86°F).

1

19

•Thebatterypackmaynotbeeffectivelychargediftheterminalsectionofthe

batteryisdirty.Inthiscase,wipeanydustofflightlyusingasol:clothoracotton

swabtocleantheterminalsectionofthebattery.

•ConnecttheACAdaptor(supplied)tothenearestwalloutlet(wallsocket).If

malfunctionsoccurwhileusingtheACAdaptor,disconnecttheplugfromthewall

outlet(wallsocket)immediatelytodisconnectfromthepowersource.

•Whenchargingisfinished,disconnecttheACAdaptorfl'omthewalloutlet(wall

socket).

•BesuretouseonlygenuineSonybrandbatterypacks,microUSBcable(supplied)

andACAdaptor(supplied).

•Powerisnotsuppliedduringshooting/playbackifthecameraisconnectedtoa

walloutlet(wallsocket)withthesuppliedACadaptor.Tosupplypowertothe

cameraduringshootiug/playback,usetheAC-PW20ACadaptor(soldseparately).

gCharging time (Full charge)

The charging time is approximately 310 minutes using the AC Adaptor

(supplied).

• The above charging time applies when charging a fi.dly depleted battery pack at a

temperature of 25°C (77°F). Charging may take longer depending on conditions of

use alld circumstances.

gCharging by connecting to a computer

The battery pack can be charged by connecting

the camera to a computer using a micro USB

cable.

• Note the following points when charging via a

computer:

If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period

of time.

Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer

and the camera. That may cause the camera to mallhnction. Befbre turning on/

off, or restarting the computer or waking the computer from sleep mode,

disconnect the camera and the computer.

No guarantees are made for charging using a custom-built computer or a

modified computer.

GB

17

Battery life and number of images that can be

recorded and played back

iiiii iiii ; iiii iii ii ii ii ii ii ii ii ii ii ii iiii ; 'iiiii iiii ; iiii iii ii ii ii ii ii ii ii ii ii iiL!!!!!!i!!!!!!!!!!!i!:i!!!!!!

Shooting (still Screen Approx. 180 min. Approx. 360 images

images) Viewlinder Approx. 155 min. Approx. 31(1 images

Typical movie Screen Approx. 60 min.

shnoling Viewlinder Approx. 60 min.

ContilmoUS Screen Approx. 90 min.

movie shonling Viewlinder Approx. 90 min.

Viewing (still images) Approx. 275 min. Approx. 5500 images

G8

18

• The above number of images applies when the battery pack is lhlly charged. The

number of images may decrease depending on the conditions of use.

• The nmnber of images that can be recorded is fnr shooting under the following

conditions:

Using a Sony Memory Stick PRO Duo _v (Mark2) media (sold separately).

-When an E PZ 16 - 50 mm F3.5 - 5.60SS lens is attached.

The battery pack is used at an ambient temperature of 25°C (77°F).

- [Viewfinder Bright.]: [Manual] [_+01

[Monitor Brightness]: [Manual] [_+01

• The nmnher lot "Shooting (still images)" is based on the C1PA standard, and is for

shooting tinder the IMlowing conditions:

(CIPA: Camera & hnaging Products Association

-D1SP is set to [Display All I nlo.].

[Focus Model: [Automatic AF]

- Shooting once every 30 seconds.

The flash is used once every two times.

The power is turned on and off once every ten runes.

• The nmnber of minutes fnr movie shooting is based on the C1PA standard, and is

fi,_rshooting under the lollowing conditions:

[_ Record Setting]: 60i 17M(FH)/50i 17M(FH).

Typical movie shooting: Battery life based on repeatedly starting/stopping

shooting, zooming, turning on/off, etc.

Continuous movie shooting: Battery life based on non-stnp shooting until the

limit (29 mim/tes) has been reached, and then continued by pressing the MOVIE

buttnn again. Other Rmctions, such as zooming, are not operated.

i!iiii! ! iii i iil

Ensure that the

notched corner is

faced correctly.

1Open the cover (page 15).

2Insert the memory card (sold separately).

• With the notched corner l'acing as illustrated, insert the memory card

until it clicks into place.

3 Close the cover.

Memory cards that can be used

Memory Stick XC-HG [)uo I'_ _/ ,_/

A Memory Stick PRO [)uo c'_ _/ _/' (Mark2 only)

Memory Stick PRO-HG [)uo I'_ V' V"

SD memory card V' V' (Class 4 or faster)

B SDHC memory card _/ _" (Class 4 or faster)

SDXC memory card _/' _/ (Class 4 or faster)

• In fills manual, the products in tile table are colleclively refim'ed to as follows:

A: Memory Stick PRO Duo media

El: SD card

To remove the memory card/battery pack

Memory card: Push the memory card in once to eject the memory card.

Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

• Never remove the memory card/battery pack when the access lamp (page 13) is lit.

This may cause damage to data ill the memory card. 6B

19

Set Ihe power switch o1'the camera to OFF before you attach or remove the

lens.

If the cap or the packaging lid is attached, remove it

from the camera or the lens.

• Quickly change the lens somevvhure away from dusty locations to keep

dust or debris from getting inside the camera.

2 Mount the lens by aligning the white index marks on the

lens and the camera.

• Hold the camera facing down to prevent dust from entering into thu

camera.

3 While pushing the lens lightly toward the camera, turn

the lens clockwise until it clicks into the locked position.

• Be sure to put the luns on straight.

• When attaching a lens, do not press the lens release button.

• Do not use excessive force when attaching a lens.

• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold

separately). For details, relier to the operating malmal supplied with the Mount

Adaptor.

• When using a lens equipped with a tripnd socket, attach the socket on the lens side

to the tripod to maintain balance.

GD

2O

Page is loading ...

Sony ILCE-6000LB Owner's manual

This manual is also suitable for

Sony ILCE-6000LB Owner's manual

Related papers

Other documents