Zebra VX 9000E Installation guide

Brand: Zebra

Model: VX 9000E

Category: Software manuals

Type: Installation guide

Zebra VX 9000E is a software WLAN controller appliance running as a virtual machine (VM) on a variety of Hypervisor and Amazon EC2 cloud infrastructures. The VX 9000E supports virtually any server and commercially available Hypervisors for fast and seamless integration into an existing network infrastructure, without adding new hardware. The VX 9000E WiNG Express Manager brings the power of award winning WiNG 5 architecture in a cost-effective, multi-site, Enterprise class WLAN management platform without the comprise of performance and scale. The VX-9000E can support WLAN networks scaling up to 1024 Express Access Points, ideal for small-to-mid sized businesses., and is pre-installed with 64 Express Access Point licenses for immediate operation.

VX 9000E

WiNG Express Manager

INSTALLATION GUIDE

2 VX 9000E WiNG Express Manager

Service Information

If you have a problem with your equipment, contact support for your region. Support and issue resolution is provided for

products under warranty or are covered by an agreement. Contact information and web self-service is available by visiting

www.zebra.com/support

When contacting Support, please provide the following information:

• Serial number of the product

• Model number or product name

• Software type and version number

Support responds to calls by email or telephone within the time limits set forth in support agreements. If you purchased your

Enterprise Mobility business product from a business partner, contact that business partner for support.

Support Web Site

Support, located at www.zebra.com/support provides information and online assistance including developer tools, software

downloads, product manuals, support contact information and online repair requests.

Installation Guide 3

Introduction

The VX 9000E WiNG Express Manager is a software WLAN controller appliance running as a virtual machine (VM)

on a variety of Hypervisor and Amazon EC2 cloud infrastructures. The VX 9000E supports virtually any server and

commercially available Hypervisors for fast and seamless integration into an existing network infrastructure,

without adding new hardware.

The VX 9000E WiNG Express Manager brings the power of award winning WiNG 5 architecture in a

cost-effective, multi-site, Enterprise class WLAN management platform without the comprise of performance and

scale. The VX-9000E can support WLAN networks scaling up to 1024 Express Access Points, ideal for small-to-mid

sized businesses., and is pre-installed with 64 Express Access Point licenses for immediate operation.

The VX 9000E provides a state-of-the-art user interface allowing administrators to setup sites with just simple

steps. Intuitive auto-provisioning policy supports trouble-free multi-site deployment. Built-in analytics present

volumes of information on the Access Points, radios, WLANs, and all devices connected to the WLANs, on an

easy to navigate interface to monitor and manage every aspect of the wireless network.

Users are required to purchase a license to activate their VX 9000E download. The ordering and fulfillment

process however is similar to other software products, with an appliance license shipped in the form or a

hardcopy license certificate.

A license is required to enable VX virtualized controller functionality within WiNG. There are different AP license

packs available depending on the number of adaptive access points you’d like to support.

License Description

VX-9000E-APPLN-LIC VX 9000E EXPRESS MANAGER APPLIANCE W/64 EXPRESS

AP LICENSES

VX-9000E-ADP-32 VX 9000E - 32 PACK EXPRESS AP LICENSE

VX-9000E-ADP-128 VX 9000E - 128 PACK EXPRESS AP LICENSE

VX-9000E-ADP-512 VX 9000E - 512 PACK EXPRESS AP LICENSE

4 VX 9000E WiNG Express Manager

Installing the VX 9000E WiNG Express Manager on a Hypervisor

To license and install the VX virtualized controller:

1. Go to the Support site at

www.zebra.com/support.

2. Refer to the Wireless Networks section in the lower, right-hand, side of the screen and select Get

Software Downloads.

3. Select Option 2, All Other Wireless Products.

4. Navigate to the bottom of the screen and select (expand) the Wireless LAN option.

5. Select and download the VX 9000E WiNG Express Manager appliance.

The VX appliance is downloaded as an .iso image

6. Ensure a Hypervisor (ESXi, Xen, Hyper V) is installed in your server environment or the downloaded .iso

image will not run.

7. Install the .iso in a manner similar to a standard VM.

8. Boot the VX 9000E WiNG Express Manager for the first time.

The system prompts the user to change the password.

9. Configure your network for your data center environment (static IP address). Commit your updates.

The serial number is automatically generated. The VX appliance is ready for license activation.

10. Run

show version command to display the serial number.

NOTE A user account and support login must be created to download application and

software from the support site. Go to the Support Login section on the right-hand side

of the screen and select Register for My Account. Complete the region, support

type, customer and support requirements fields to required to receive your support

NOTE It’s recommends you save (archive) the serial number generated in

step 9.

NOTE Do not change the IP address. If changed, the VX will not function until you obtain a

new license by calling Support.

Installation Guide 5

Installing in an ESXi Environment

To install the VX 9000E in an ESXi environment:

1. Within the vSphere client, select File > New > Virtual Machine.

2. Select Typical within the Configuration field, then Next > from the lower, right-hand, side of the screen.

3. Enter a 80 character maximum virtual machine name, then Next > from the lower, right-hand, side of the

screen.

4. Select the target Storage location from amongst the destinations listed, then Next > from the lower,

right-hand, side of the screen.

6 VX 9000E WiNG Express Manager

5. Within the Guest Operating System screen, select Linux as the guest operating system.

6. Use the Version drop-down menu to select Other Linux (64-bit), then select Next > from the lower,

right-hand, side of the screen.

7. Select one network interface card (NIC) from the How many NICs do you want to connect? drop-down

menu.

8. Assign a Network to NIC1, then select Next > from the lower, right-hand, side of the screen.

Installation Guide 7

9. Set the Virtual disk size from within the Create a Disk screen, then select Next > from the lower,

right-hand, side of the screen.

10. Select the Edit the virtual machine settings before completion checkbox, then select Continue from

the lower, right-hand, side of the screen.

8 VX 9000E WiNG Express Manager

11. From within the Hardware tab, select

Installation Guide 9

12. From within the Hardware tab, select Memory as the hardware type and set the Memory Size.

10 VX 9000E WiNG Express Manager

13. Remain within the Hardware tab, and select CD/DVD.

14. Set the device type to Datastore ISO File. Select the Browse button and select the VX 9000E ISO file.

Select Finish from the lower, right-hand, side of the screen.

Installation Guide 11

15. Highlight the new VX 9000E VM and select the Console tab.

16. Right-click and select Power > Power On (or CTRL+B).

17. Select the Enter key when prompted to begin the VX 9000E installation process.

12 VX 9000E WiNG Express Manager

18. When the installation is completed, select the Enter key again to reboot the VX 9000E:

The VX 9000E is now ready to configure.

Installation Guide 13

Installing in a Hyper-V Environment

To install the VX 9000E in a Hypyer-V environment:

1. From the Hyper-V Virtual manager, under actions, select Virtual Switches > New virtual network

switch.

2. Select External from within the Create virtual switch field.

3. Provide a Name for the switch and the physical interface used for External network connection. Select

OK to save the updates.

14 VX 9000E WiNG Express Manager

4. From the Hyper-V manager, select new > virtual machine to launch the New Virtual Machine Wizard

used to create a virtual machine for the VX 9000E. Select Next > from the lower right to continue.

5. From the Specify Name and Location screen, provide a Name for the virtual machine and specify its

location. Select Next > from the lower right to continue.

Installation Guide 15

6. From the Assign Memory screen, enter a Startup memory (in MB) for the virtual machine. Select

Next > from the lower right to continue.

7. From the Configure Networking screen, use the Connection drop-down menu to select the external

network connection defined earlier in this Hyper-V installation. Select Next > from the lower right to

continue.

16 VX 9000E WiNG Express Manager

8. From the Connect Virtual Hard Disk screen, select the Create a virtual hard disk option and specify

the Location and Size of a dynamically expanding virtual hard disk. Select Next > from the lower right

to continue.

9. From the Installation Options screen, select the Install an operating system from a boot

CD/DVD-ROM option and select the Image file (.iso) option).

10. Select the Browse button and navigae to the location of the downloaded VX 9000E image file. Select

Next > from the lower right to continue.

Installation Guide 17

11. From the Summary screen, review the parameters you’ve defined for the virtual machine. Select Finish

from the lower right to continue to commit the listed settings to the virtual machine configuration.

12. From Hyper-V manager, double click on the virtual machine and start it by selecting the power button.

18 VX 9000E WiNG Express Manager

13. When prompted within the console, select Enter to start the VX 9000E installation.

14. When the installation is completed, select Enter to reboot the VX9000E.

Installation Guide 19

The VX 9000E is now ready for configuration.

20 VX 9000E WiNG Express Manager

License Key Generation and Activation

Generate and activate the license from the MyLicenses Web portal (formally MySymbolOrder).

To activate a license:

1. Go to http://portal.zebra.com

If you do not have an existing account, select the Register for a new account link and complete the

instructions for creating the required account for registering and activating wireless products.

2. Enter the Username and Password in the fields provided.

3. Select I need to register/activate a license(s) from within the PRE-REGISTRATION screen. Select

Next to proceed.

Selecting I need to register/activate a license(s) will display additional prompts to enter your customer

number or serial number.

4. Select I don’t know my customer number and enter you serial number.

5. If you haven’t registered for application access, complete the forms with the Company, Billing, Contact

and Login screens. When completed, you will receive an Email confirming your registration and another

separate Email with application account status.

6. With username and password obtained, go the portal and login.

7. From the MY LICENSES - ACCESS GRANTED field, select the Click here to go application link

A Product Licensing page displays.

8. Use the Select Product Category drop-down menu to select VX 9000E.

9. Use the serial number obtained using

show version command (in the previous section) within the

Enter Product Serial Number field. Select Go.

Navigate the Register/Apply Upgrades and View Existing Configuration tabs to assess the license

configuration and add certificates for the VX 9000E.

NOTE It’s recommends you document and archive the serial number obtained running the

show version command.

Page is loading ...

Zebra VX 9000E Installation guide

Brand: Zebra

Model: VX 9000E

Category: Software manuals

Type: Installation guide

Download PDF

report

Zebra VX 9000E Installation guide

Zebra VX 9000E Installation guide

Related papers

Other documents