York YK-ZCU2x0-0 User manual

Brand: York

Model: YK-ZCU2x0-0

Category: Thermostats

Type: User manual

This manual is also suitable for

York Commercial Comfort System

System Manager/Zone Coordinator

User’s Manual

YK-SMU2x0-0, YK-ZCU2x0-0, YK-ZCU4x0-0

YCCS System Manager / Zone Coordinator

System Manager/Zone Coordinator User’s Manual

TABLE OF CONTENTS

Document Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Related Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

System Manager/Zone Coordinator on the Network . . . . . . . . . . . . . . . . . . . . . . . . . 7

System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

User Interface Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

System Startup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

System Manager/Coordinator Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Main Selection Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Title Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Main Display Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Help Text/Paging Information Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Navigation Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Enter Password Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Default Passwords Provided . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Home Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Display and Navigation Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Data Entry Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Remote User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Alarms and Alarm Priorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Types of Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Buffer Limitation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Alarm Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Alarm Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Pagers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

System Manager/Zone Coordinator

User’s Manual

YK-SMU2x0-0, YK-ZCU2x0-0, YK-ZCU4x0-0

428516-YUM-B-0908

System Manager/Zone Coordinator User’s Manual 3

428516-YUM-B-0908

E-mail Accounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Text Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Zones, Groups, and Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Event Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Temporary Occupancy Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

All Schedules - Temporary Occupancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Exception Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Global and Instant Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Trend Data Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Display Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Maintenance Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Detailed Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Basic Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Waking up the Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Entering Your Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Logging On the Remote User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Logging Off the Remote User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Setting Date and Time Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Changing the Administrator or Operator Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Enabling (or Disabling) Password Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Enabling (or Disabling) the Remote User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Setting up a Modem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Specifying Ethernet Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Selecting Display Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Calibrating the Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Specifying System Manager/Zone Coordinator Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Entering Job Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Scheduling Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Adding a Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

System Manager/Zone Coordinator User’s Manual4

428516-YUM-B-0908

Deleting a Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Adding a Member to a Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Deleting a Member from a Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Adding an Exception Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Setting up Temporary Occupancy Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Beginning Temporary Occupancy of a Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Ending Temporary Occupancy of a Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Beginning or Ending Temporary Occupancy to All Schedules . . . . . . . . . . . . . . . . . . . . . . 47

Alarm Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Configuring Pager as Alarm Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Configuring E-mail Account as Alarm Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Configuring Text Message as Alarm Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Setting Alarm Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Viewing an Alarm Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Deleting One or All Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Summary Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Viewing System Summaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Viewing Trend Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Zone Setup Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Setting Up a Changeover Bypass Zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Setting Up a CV RTU Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Setting up a VAV RTU Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Editing a Zone Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Viewing Zone Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Copying Zone Setup to All Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Requesting Global Shutdown of all Zones in all Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Viewing Device Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Zoning System Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Setting Up a Zoning System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Viewing Zoning System Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

System Manager/Zone Coordinator User’s Manual 5

428516-YUM-B-0908

Requesting Instant Shutdown of a Zoning System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Balancing a Zoning System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Auxiliary Points Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Setting up Auxiliary Points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Editing an IOM Controller Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Viewing Auxiliary Points Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Viewing IOM Controller Point Trend Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Dial-up Communication Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Creating a Dial-up Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Dialing up a System Manager or Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Maintenance Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Backing up Current Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Restoring Configuration Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Restoring Factory Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Relearning Connected Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Restarting the System Manager/Zone Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

System Manager/Zone Coordinator User’s Manual6

428516-YUM-B-0908

System Manager/Zone Coordinator

User’s Manual

Document Introduction

This document describes how to operate the System Manager (YK-SMU2x0-0) and

Zone Coordinator (YK-ZCU2x0-0 and YK-ZCU4x0-0) with display. These products

are user interface components of the York Commercial Comfort System (YCCS),

which is a building automation system designed for small- to medium-sized buildings

to provide occupant comfort.

Note: The term Coordinator, whenever used in this document, is shorthand for

Zone Coordinator. You can also access a Coordinator without a display

from a System Manager.

This document does not describe how to install the System Manager or Zone Coordi-

nator. It also does not describe how to operate any other YCCS components.

See Related Documentation for additional information related to applying the System

Manager and Zone Coordinator to your YCCS control network.

Related Documentation

Table 1: System Manager/Zone Coordinator User’s Guide Related

Documentation

For Information On See Document LIT or Part Number

Features, Benefits, and

Applications of the YCCS

York Commercial Comfort System

Technical Guide

428515

Installation and Specifications

of the YCCS System Manager

and Zone Coordinator

YCCS System Manager and Zone

Coordinator Installation

Instructions

428516

System Manager/Zone Coordinator User’s Manual 7

428516-YUM-B-0908

System Manager/Zone Coordinator on the Network

The System Manager and Zone Coordinator provide User Interfaces (UIs) to the

devices in the YCCS network. The display units typically install in a main equipment

or control room, and connect to the Transmission Control Protocol/Internet Protocol

(TCP/IP) Ethernet network or the Master-Slave/Token-Passing (MS/TP) Bus. You can

access a Coordinator without a display from a System Manager. Figure 1 shows an

example of the YCCS network.

Constant Volume

Rooftop Controller

Zone Coordinators

System Manager

COBP Rooftop Controller

COBP Rooftop

Controller

Bypass Controller

Zone Controllers

Zone Sensors

Zone Controllers

Zone Sensors

I/O Module

Zone Bus

(MS/TP)

SA Bus

System Bus (MS/TP)

Bypass Controller

Zone Sensors

TCP/IP Ethernet

LC-SMU-0

Thursday, May 8, 2008 5:23:44 PM

Outdoor Air Temperature: 63.1 Deg F

Software Revision: 1.0.2445

LC-ZCU-10

Thursday, May 8, 2008 5:23:44 PM

Software Revis ion: 1.0.2445

Zoning Syst em Status:

Outdoor Air Temperature:

Off

68.3 Deg F

Figure 1: Example of YCCS Network with System Manager and Zone Coordinators

System Manager/Zone Coordinator User’s Manual8

428516-YUM-B-0908

System Configuration

Components of the YCCS self configure as they come online. The system requires no

database commissioning or programming – the System Manager detects all Coordina-

tors on the network and displays them to the user. As the Zone Coordinator comes

online to the Zone Bus network, it automatically discovers each zone and zone con-

troller, then displays them to the user. A relearn function updates which devices are

online to the Zone Bus and System Bus. During the relearn process, groups and sched-

ules that contain any of the removed devices are also updated.

User Interface Overview

The System Manager and Zone Controller each consist of a colored Liquid Crystal

Display (LCD) touch sensitive screen that you use to make all selections. No stylus

pen or mouse is required. The display contains a menu-driven interface program that is

stored in the embedded firmware. This program enables you to set system parameters,

access system information, and monitor and control connected equipment. These oper-

ations are available from five screen types that use a common layout. The five types

are the Home screen, Alarm screen, Summary screen, Schedule screen, and Setup

screen. When you select a screen by touching its icon, the icon turns green, indicating

that it is currently active.

System Startup

When the System Manager/Coordinator is powered on, the user interface displays a

splash screen with a progress bar to indicate the status of the startup. At this point, the

Alarm LED in the upper right corner of the unit is red. Seconds later, the Alarm LED

turns green. Finally, the System Manager/Coordinator displays the Home screen

(Figure 5 on page 13), which is the starting point for monitoring and controlling the

system. The entire startup sequence takes no more than a few minutes.

System Manager/Zone Coordinator User’s Manual 9

428516-YUM-B-0908

System Manager/Coordinator Menu Structure

Figure 2 is a top level flowchart of the menu structure for the System Manager/Coordi-

nator. The menu selections are described in the following sections. See the referenced

figure numbers for a detailed flowchart of the options available under each selection.

Home Screen

Alarm Screen Summary Screen

Schedule Screen Setup Screen

See

Figure 5.

See

Figure 31.

See

Figure 38.

See

Figure 22.

See

Figure 11.

Figure 2: Local Controller Display Menu Structure

System Manager/Zone Coordinator User’s Manual10

428516-YUM-B-0908

Screen Layout

The screens that you access from the System Manager/Coordinator’s Home Screen

share a common layout and theme. Each screen has a main selection bar, title area,

main display area, help text/paging information area, and navigation area.

Main Selection Bar

Each screen has the same main selection bar. It displays the job name (if defined) and

contains the primary function icons that you push to navigate to a particular screen.

The screens are Home, Alarm, Summary, Schedule, and Setup.

Table 2: Icons on Main Selection Bar

Button Description

Home icon - returns the display to the Home screen.

Alarm Summary icon - displays the Alarm summary, which is a history of alarm

activity that has occurred. The alarm setup screen is also accessible from this

screen. The alarm icon blinks red when a new alarm is in the system.

Summary icon - displays the Summary screen, which provides a number of

summaries for the user, including trend data.

Schedule icon - displays the Schedule screen, which allows you to add,

delete, and view equipment schedules.

Setup icon - displays the Setup screen, which allows you to configure the

System Manager/Coordinator and define various systems.

ZC6 - Details

Zone Temperature:

Zone Current Setpoint:

Occupancy Status:

Operating Status:

Zone is Requesting:

Unoccupied

Trend Zone Status

Schedule

64.1 Deg F

62.0 Deg F

Cooling

None

ScrnLyt

Base Setting:

Thermostat Alignment:

Unavailable

68.0 Deg F

Figure 3: System Manager Basic Screen Layout

Main

Selection

Bar

Title

Area

Main

Display

Area

Help Text/

Paging

Information

Area

Navigation

Area

System Manager/Zone Coordinator User’s Manual 11

428516-YUM-B-0908

Title Area

The title area shows the name of the display or edit screen and the name of the item

(for example, ZC6) that is being displayed or edited.

Main Display Area

This area contains the main content for the particular screen. The area may also

include touch buttons used to navigate or to display the editor screen for editing a par-

ticular parameter. This area may refresh, depending on what information appears. The

normal refresh time for indicating the change in a monitored value is 5 seconds or less.

Help Text/Paging Information Area

This area displays optional help text. The text helps you understand what is displayed

or how to edit a value. If the current screen is one of several pages (for example, an

alarm summary), then the text Page x of y appears in this area.

Navigation Area

This area may contain one or more navigation buttons used to reach other screens. One

of these buttons may be a Back button that, when pressed, displays the previous

screen.

System Manager/Zone Coordinator User’s Manual12

428516-YUM-B-0908

Enter Password Screen

The Password screen may appear when you attempt to change a value, request an addi-

tion, or make a deletion. The password requires 4 digits. Once the system authenticates

your password entry, the screen that you requested appears.

Three user password levels are available, each with some slight differences; they are

Default, Operator, and Administrator.

Table 3: Three User Password Levels

Level Description

Default No login is required for this level.

Users can view any information. The local UI assumes this level if no user

is logged in. The remote UI supports this level via the Guest account.

Operator Requires login with an Operator account.

Allows the user to modify almost everything (except those reserved for the

Administrator level.)

Administrator Requires login with the Administrator password.

Users can do the same actions as Operator users; plus, change

passwords, restore configuration data, relearn the System or Zone bus,

and disable the security feature.

Figure 4: Operator Password Entry Screen

Enter password

Cancel ClearOK

7 8 9

| * * * *

Enter Operator password

FIG:EntrOpPWd

System Manager/Zone Coordinator User’s Manual 13

428516-YUM-B-0908

Default Passwords Provided

Several default passwords are defined from the factory. Each is listed as follows:

Home Screens

The Home screen appears when you first activate the System Manager or Zone Coor-

dinator by touching its screen. This screen indicates the name and type of device, the

current date and time, the software revision, and the outdoor air temperature. The Zone

Coordinator Home Screen also shows Zone System Status. After 10 minutes of touch

screen inactivity, the local UI times out, the user is logged out, and the screen goes to

the Home screen. After 5 more minutes of inactivity (15 minutes total), the screen

turns black.

Table 5 indicates the varied information for displaying the outdoor air temperature and

zone system status on the Home screen. The current date, current time, outdoor air

temperature, and zone system status values refresh.

Table 4: List of Default Passwords

User Name Default

Password

Privileges Available at:

Guest <blank> View only Remote UI only

Operator 1111 Modify all (except

password)

Local and remote UI

Admin 2222 All privileges Local and remote UI

Table 5: Contents of Home Screen Display

Type of Information Status What is Displayed

Outdoor Air Temperature Reliable Current outdoor air temperature with units are shown

Problem with

Sensor

Sensor Problem

Offline Change-over Bypass (COB), Constant Volume (CV), or

Variable Air Volume (VAV) Rooftop Unit (RTU) Offline

Unavailable Unavailable

Zoning System Status Online COB or VAV RTU status

Offline COB or VAV RTU Offline

FIG:HmeScrn

YK-SMU-0

Thursday, May 8, 2008 5:23:44 PM

Outdoor Air Temperature: 63.1 Deg F

Software Revision: 1.0.2445

System Manager Home Screen

Zone Coordinator Home Screen

YK-ZCU-10

Thursday, May 8, 2008 5:23:44 PM

Software Revision: 1.0.2445

Zoning System Status:

Outdoor Air Temperature:

Off

68.3 Deg F

Figure 5: Home Screens - System Manager and Zone Coordinator

System Manager/Zone Coordinator User’s Manual14

428516-YUM-B-0908

Display and Navigation Screens

Display and Navigation screens allow you to navigate through the system. By pressing

the appropriate button, you find the information or reach the data input screen you

need. Figure 6 is an example of a navigation screen. Table 6 describes a set of naviga-

tion buttons that may appear on any screen.

Table 6: Buttons Available on Navigation Screens

Button Description

Option button - changes the display to reflect this option.

Back button - returns the display to the previous screen.

Page Down button - displays the next page of information on this screen.

Page Up button - displays the previous page of information on this screen.

YK-SMU-0 - Setup

System Manager

Systems

Auxiliary Points

Figure 6: Example of a Navigation Screen (System Manager Setup)

System Manager/Zone Coordinator User’s Manual 15

428516-YUM-B-0908

Data Entry Screens

Data Entry screens on the System Manager/Coordinator enable you to perform opera-

tions such as entering setup parameters, selecting from a list of options, and specifying

time schedules. Figure 7 is an example of a screen where you can enter a scheduled

occupancy time. Other data entry screens display a full keyboard. Table 7 describes the

buttons that may appear in the navigation area of data entry screens.

Table 7: Buttons Available on Navigation Area of Data Entry Screens

Button Description

OK button - performs the desired action.

Cancel button - returns the display to the previous screen (no action is taken).

Clear button - removes the data entry made in the New Value field, so that you

can enter a different value.

Back button - returns the display to the previous screen.

Enter the new time value.

Cancel ClearOK

7 8 9

Current Value:

Valid Range:

New Value:

Schedule 1 - Mon - Occupancy Time 1

FIG: OccTme

8:00 AM

12:00 AM to 11:29 PM

hh:mm AM

Figure 7: Example of a Data Entry Screen (Occupancy Time 1 Screen)

Cancel

Clear

System Manager/Zone Coordinator User’s Manual16

428516-YUM-B-0908

Remote User Interface

The System Manager/Coordinator includes a remote user interface option allowing

you to access the device remotely using Microsoft® Internet Explorer® Web browser

on your computer. You simply enter the IP address of the System Manager/Coordina-

tor on the address bar of the browser (for example, http://169.254.13.8). A dialog box

then displays, asking you to specify a valid user name and password (Figure 8).

Most operations available locally at the System Manager/Coordinator are also

available when you log on remotely. The differences between the remote UI and

the local UI include the following:

• The remote UI requires you to log in with a user name and password. You can

also use the default Guest account, which does not require a password and

provides view-only access to the system. The Guest access level is the

equivalent of a local user prompting the UI by pressing the touch screen.

• You can disable remote system access; see Enabling (or Disabling) the Remote

User Interface.

• You cannot disable the use of security on the remote UI.

• The remote UI time-out due to user inactivity does not log you out; remote UI

log out only occurs when you close the browser.

• The data refresh rate of the remote UI is between 5 and 10 seconds.

• The remote UI does not display the numeric keypad because you use the

computer keyboard to enter values into parameter fields or the mouse to select

from drop-down dialog boxes.

• The remote UI does not use the Back Arrow or the Up/Down Arrow buttons;

you use the browser’s Back button to display the previous screen and the scroll

bar to move up and down the screen.

Figure 8: Specifying User Name and Password in Browser

System Manager/Zone Coordinator User’s Manual 17

428516-YUM-B-0908

Note: The user name and password screen in Figure 8 may also appear whenever

you are logged on to the System Manager/Coordinator and access an

operation, which requires user authentication such as changing your

password. After you enter your password, you do not need to enter it again

during the session, unless you request an operation that requires a higher

level password.

Note: All screen representations in this document reflect how they appear at the

display, not how they appear at the remote interface.

Alarms and Alarm Priorities

The System Manager and Zone Coordinator monitor the status of equipment on the

network and report an alarm whenever they detect a problem has occurred such as an

offline condition. The following information is gathered for each alarm:

• Name of the device the alarm is associated with

• Alarm condition

• Date and time when the condition occurred

• Suggested user action

• Priority of alarm, which can be one of the following:

• Service - service whenever convenient

• Service Priority - service is required as soon as possible

• Critical - service is required immediately

Types of Alarms

The Zone Coordinator generates an alarm for each new problem condition, such as:

• Offline transitions of the COB or VAV Rooftop Unit (RTU) Controller, Bypass

Damper Controller and Zone Controllers on its Zone Bus

• Online transitions of the COB or VAV RTU Controller, Bypass Damper

Controller and Zone Controllers on its Zone Bus

• Mechanical equipment problems detected by a COB or VAV RTU Controller

Similarly, the System Manager generates an alarm for:

• Offline transitions of the COB or VAV RTU Controller, IOM Controllers and

Coordinators on its System Bus

• Online transitions of the COB or VAV RTU Controller, IOM Controllers and

Coordinators on its System Bus

• Mechanical equipment problems detected by a CV RTU, COB RTU or VAV

RTU Controller

System Manager/Zone Coordinator User’s Manual18

428516-YUM-B-0908

Buffer Limitation

The Zone Coordinator holds the last 50 alarms in memory, whereas the System Man-

ager keeps the last 150 alarms. When the buffer limit is reached, the newest alarm

replaces the oldest alarm. All alarms kept at the Coordinator are also forwarded to the

System Manager. If the Coordinator cannot forward the alarms to the System Manager,

the last 50 alarms are kept at the Coordinator, then sent within 30 seconds after com-

munication between the two devices has been restored.

Alarm Detection

When a new alarm occurs, the Alarm icon on the display turns red and begins to blink.

Also, the Alarm LED on the upper right corner of the display turns from green to red.

The Alarm icon returns to its normal state and the Alarm LED returns to green after

you select the Alarm icon at the System Manager or Coordinator.

You can view alarms by pressing the Alarm icon from the Home screen. The most

recent alarms are listed first. After you view the alarms in the system, you can delete

them, either one at a time or all alarms at once.

Alarms can be routed to pagers, e-mail accounts, and cell phones via text messaging.

See Alarm Destinations on page 18 for details.

Alarm Destinations

The System Manager and Coordinator may send alarms to destinations such as pagers,

e-mail accounts, and cellular phones with text messaging systems. By default, the Sys-

tem Manager or Coordinator routes any critical alarm to these destinations, but only if

you have configured the destinations. An analog telephone line and a System Manager

or Zone Controller with an internal modem is required for sending alarms to pagers.

An Ethernet connection is required for sending alarms to e-mail accounts and text

messaging systems. A text messaging system is any software application that routes

text messages to cellular phones that support the Short Message Service (SMS) proto-

col. To increase alarm coverage, you may choose all three alarm destinations on a sin-

gle System Manager and Coordinator.

The following is an example of an alarm sent to an alarm destination:

Pagers

The System Manager or Coordinator can send alarms to paging devices. When a criti-

cal alarm occurs, the internal modem in the device uses the pager configuration param-

eters to establish communication with the paging system. The device passes the alarm

to the paging system, then routes it to the pager. The time required for the alarm text to

reach the pager depends on several factors, including the speed and reliability of the

paging service.

E-mail Accounts

The System Manager or Coordinator can send alarms to e-mail accounts. When a crit-

ical alarm occurs, the device constructs a message with an e-mail format, then sends it

6/5/2008 1:04:28 AM ZC7 On-line 189 Communications Restored - Service

System Manager/Zone Coordinator User’s Manual 19

428516-YUM-B-0908

over the active Internet connection to the Simple Mail Transfer Protocol (SMTP)

server using the configured e-mail destination parameters. The SMTP server passes

the message into the e-mail account specified. The time required for the alarm text to

reach an e-mail Inbox depends on several factors, which include the speed and avail-

ability of the e-mail server.

Text Messages

The System Manager or Coordinator can send alarms to cellular phones that use the

SMS protocol. When a critical alarm occurs, the device constructs a message with an

SMS format, then sends it over the active Internet connection to the SMS server using

the configured text message destination parameters. The SMS server sends the mes-

sage to the subscriber’s cellular phone account. The time required for the alarm text to

reach a cellular phone depends on several factors, including the speed and availability

of the service provider.

Zones, Groups, and Members

A Zone is an area of the building where temperature is under the control of a single

Zone Controller. A small office, classroom, warehouse, or gymnasium can be consid-

ered one zone.

A Group is a collection of zones that operate on the same schedule or temporary occu-

pancy state. Each group can support up to 24 zones for COB RTU systems or 32 zones

for VAV RTU systems. Each Coordinator can control up to 4 groups.

Lastly, a Member is something you can schedule, which can be a Group, CV RTU, or

IOM output point. The Member List is the screen that shows the currently defined

members.

Event Scheduling

You can define up to 24 event schedules at the System Manager and up to 4 event

schedules on the Zone Coordinator, if the Zone Coordinator is not reporting to a Sys-

tem Manager. Each schedule consists of a unique schedule name and a pair of two

occupied times and two unoccupied times for each day of the week. Each schedule

also has one or more members. A member is something that can be scheduled.

The last commanded state by a schedule for a particular day rolls over into the next

day (that is, remains the same) until the next commanded state for the new day occurs.

If the Coordinator reports to a System Manager, the Coordinator scheduling is not

used. In this case, the System Manager defines and executes all Coordinator schedules.

Temporary Occupancy Override

Temporary Occupancy Override allows you to force a group of zones into a temporar-

ily occupied state for a period of time, called the time-out delay. You can do this from

the Zone Details screen or by pushing the temporary occupancy button on the thermo-

stat. This action causes the zone, and all other zones in the same Group, to become

temporarily occupied together. The system ignores all occupancy schedules for these

zones during the time-out period. Once the time-out delay expires, the zones return to

their normal occupancy schedule.

System Manager/Zone Coordinator User’s Manual20

428516-YUM-B-0908

You can also force a single schedule, or all schedules, into the temporary occupancy

state from the UI. This action places all members of the schedule into temporary occu-

pancy. Members of the schedule can be a Group of zones or one or more CV RTUs.

Again, when the time-out period expires, the members return to their normal occu-

pancy schedule.

You can change the temporary occupancy time-out delay. Its range is from 15 to 240

minutes, with a default value of 120 minutes. You can also cancel temporary occu-

pancy at any time from the UI.

To indicate which schedules (if any) are temporarily occupied, view the Schedules

Summary on the System Manager or Coordinator. The Zone Status screen indicates

whether a particular zone is temporarily occupied.

All Schedules - Temporary Occupancy

This option places all schedules under temporary occupancy. This function is the same

as if just one schedule was under temporary occupancy. The same duration applies: 15

to 240 minutes.

Exception Schedules

You can add exception schedules throughout the year to accommodate holidays and

other periods of time that require different scheduling. Each exception schedule can be

for a single or reoccurring event, such as once every year. The exception replaces the

complete weekly schedule for the day it is active. Two sets of occupied and unoccu-

pied times can be defined per exception schedule.

Global and Instant Shutdown

The Global Shutdown function shuts down the entire system from the System Man-

ager. This command shuts down all Coordinators and CV RTUs that report to the Sys-

tem Manager. An enable function is also available to re-enable the entire system.

The Instant Shutdown function shuts down a single Coordinator, CV RTU, or IOM.

Shutting down a coordinator also shuts down all of its zones. An enable function is

also available to re-enable a single system.

Trend Data Collection

The System Manager and Coordinator keep records of the changing values of points in

the system. You can view these values on a Trend report. The System Manager or

Coordinator collects one sample every 15 minutes over the past 72 hours for the fol-

lowing values:

• Zone temperature

• Supply or discharge air temperature

• Return air temperature

• Outside air temperature

Page is loading ...

York YK-ZCU2x0-0 User manual

Brand: York

Model: YK-ZCU2x0-0

Category: Thermostats

Type: User manual

This manual is also suitable for

Download PDF

report

York YK-ZCU2x0-0 User manual

This manual is also suitable for

York YK-ZCU2x0-0 User manual

Related papers

Other documents