Epson B813102 User guide

Brand: Epson

Model: B813102

Category: Scanner Transparancy Adapters

Type: User guide

This manual is also suitable for

Expression 836XL

EPSON Expression 836XL

carric

(at

positi

3me

document cover

on)

transportation

lock screw

’

ERROR READY OPERATE

light

terminator

SCSI ID rotary

switch

parallel

SCSI.

option

interface

interface.

\AC

connector

connectors

connector

inlet

Scanner Specifications

Scanner type:

Photoelectric

device:

Effective pixels:

Maximum

document size:

scanning

resolution:

Output resolution:

Scanners

Flatbed, color

Color CCD (Charged Coupled Device)

line sensor

9760 dots by 13760 dots at 800 dpi, 100%

12.2 inches x 17.2 inches

(310 mm x 437 mm); up to A3 or US B

size. Reading area can be specified from

software.

800 dpi main, 1600 dpi sub

50 to 3200 dpi in 1 dpi increments.

Values above 800 interpolated through

software.

Command level:

Scanning speed

(A3/portrait

800 dpi draft

mode):

Adjustable

focusing function:

Color separation:

Reading sequence:

Zoom:

Image data:

Brightness:

Line art settings:

Interface:

Light source:

Reliability:

Dimensions:

Weight:

ESC/I-B8

(BG+Focus

Control)

Line art: Approx.

10.8rns/line

256 gray levels: Approx. lOBms/line

Full color: Approx.

15ms/line

One-piece CCD/lens movement system.

Focus adjustable up to 5mm above the

surface of the document table.

RGB color filters on CCD

Monochrome mode:

One-pass scanning

Color line sequence mode:

One-pass scanning

(R,

G, B)

50 to 200% in 1% increments

12 bits input (optical density of 3.3)

8 or 12 bits output

7 levels

Fixed threshold with TET (Text

Enhancement Technology) enabled

Bidirectional parallel and SCSI

Xegas

cold cathode fluorescent lamp

Main unit MCBF: 100,800 cycles of

carriage movements

Width: 25.8 inches (656 mm)

Depth:

18.0 inches (458 mm)

Height: 6.7 inches

(170

mm)

About 44.1 lb (20 kg)

Electrical Specifications

Input voltage

range:

Rated frequency:

Input frequency:

Rated current:

Power

consumption:

Insulation

resistance:

100 to 240 VAC

Universal autoswitching

5oto6oHz

49.5 to 60.5 Hz

1.2 A (input AC 100V)

0.7 A (input AV 200V)

Appmx.

60 W, 75

W maximum

with

optional unit

10 M Ohms at 500VDC (between AC line

and chassis)

Environmental Conditions

Temperature: Operation:

41’

F to 95” F

(5”

C to 35”

Storage:

-13’

F to

140’

f-25”

C to 60”

Q/9/97

EPSON Expression 836XL-1

EPSON Expression 836XL

Humidity:

Operation: 10% to 80%, without

condensation

Storage: 10% to 85%, without

condensation

Ordinary office or home conditions.

Avoid extremely dusty conditions, direct

sunlight, or strong light sources.

Safety Standards

UL1950 with D3, CSA

CZ2.2

950 with D3

EMC: FCC Part 15 subpart B class B

(USA)

CSA

C108.8

class B (Canada)

Parallel Interface Specifications

Interface type:

Bidirectional parallel interface

Data format:

8-bit parallel

Synchronization:

By external strobe pulse

Handshaking:

By ACKNLG and BUSY signals

Logic level:

Input/output data and interface control

signals are

lTL

compatible

Connector type:

&pin

Centronicse

type connector

Connector pin

arrangement:

36’

Bidirectional parallel interface pin assignments

at the receiving terminal must be longer

lhan5ops.

32 NC

Not used

GND

Ground

34,35

Not used

36 DIR

Dire&m7

SCSl Interface Specifications

Interface type:

ANSI Standard X3.131-1986

Logic level:

TTL

compatible

Electrical standard ANSI Standard X3.131-1986

ID number:

Selectable from 0 to 7

Connector type:

Two

50-pin

connectors

Terminator:

Internal terminator selectable

Connector pin

arrangement:

/’

SCSI pin assignments:

ACK

Admowledge

RST

Reset

46 MSG

Message

47 SEL

I/O

SekXt

146

IC/D

I Command/data

REQ

Request

I/O

IO I Inwtloutmt

Initialization

When the scanner is initialized (returned to a fixed set of

conditions), it terminates scanning and the carriage returns

to the home position (rear of the scanner).

Hardware

initialization

Software

initialization

When the power is turned on

When the scanner parallel interface receives

INIT

signal (pin 31 goes

LOW)

When the scanner receives a SCSI Reset

signal at the SCSI interface

When the scanner receives the software

command ESC

(initialize the scanner)

When the scanner receives a SCSI Bus Device

Message

EPSON Expression 636XL-2

O/9/97

Scanners

EPSON Expression 836XL

Problems and Solutions

Some problems you may have while using the scanner may

involve the operation of your software and computer, such as:

Incorrect setup of the parallel or SCSI interface

Inappropriate selection of the scanner functions

Incorrect setup of your computer or software

Incorrect operation of your software.

Also see the documentation that came with your software,

computer, and printer for possible solutions.

Indicator lights

If an error occurs, the scanner stops operating and the

READY

and

ERROR lights

indicate the type of error.

Command error

The scanner received incorrect c

ommands

from your

scanning software.

If this error occurs, try rescanning the document. The scanner

returns to normal when it receives correct commands.

Normally you do not need to reset the scanner.

Interface error

The interface setup is wrong, or the scanner is not properly

connected to the computer.

If this error occurs, check the interface connection Then push

the

RESET

button or turn the scanner off and then back on to

reset it.

Fatal error

One of the following problems occurred:

The transportation lock screw is not released.

There is a problem with the optional transparency unit or

the automatic document feeder, such as an open cover.

The fluorescent lamp needs to be replaced.

The scanner is inoperative.

If this error occurs, check that the transportation lock screw is

released and check any installed options; then push the

RESET

button. If the scanner still does not operate properly, try

turning the scanner off and then back on If the scanner still

does not operate properly, or if this error occurs repeatedly,

consult your dealer.

Scanners

Option error

This indicates a problem with an installed option, such as

jammed paper in the auto document feeder. If this error

occurs, check the option and correct the cause of the trouble.

Optional Equipment Specifications

Automatic Document Feeder (B813112)

The automatic document feeder (ADF) option allows you to

stack up to 50 sheets and scan them automatically. This is

especially helpful for optical character recognition (OCR)

scanning of text. The ADF replaces the scanner cover but still

allows scanning of individual items.

ADF type: Page transportation and duplex

scanning with automatic reverse

Document center alignment; fed face up

from the bottom; face up ejection

1.2 seconds (A4/LT landscape)

Document

transportation:

Document

replacement time:

supported

document size:

Feeding capacity:

Eject capacity:

Paper types:

Porhaitz

A3, Ledger, B4, Legal, A4,

Letter, B5, A5,5.5 x 5.8 inches

(140 x 148 mm)

Landscape: A4, Letter, B5, A5

50 sheets of 21 lb (80

g/m21

paper,

size A4

flandscape/portrait~

Letter

(landscape/portrait1

or smaller;

sheets of 21 lb

(80

g/m21

paper,

size B4, Legal, or larger

100 sheets

Bond paper, average to high quality

paper, or fine ink jet paper

Note:

Do not use

the@!owing

paper types: Tracing paper; coated paper;

pasted paper; labels; OHP film; carbon paper; catalog paper; stapled

paper; clipped paper; paper with holes

(such

as loose-leafpaper);

ripped, curled, or bent

paper;

sped

paper

Csuch

as rice paper).

Paper thickness:

Power supply:

current

consumption:

Temperature:

Humidity

(without

condensation):

o/9/97

13 to 33 lb (50 to 127

g/m’)

Supplied through scanner

DC24v

10%

DaViIlO%

DC24V

2.OA

DC5v:

0.3A

Operation: 41 to 95” F (5 to 35”

Storage: -13 to 140” F f-25 to

60”

Operation: 10 to 80%

Storage: 10 to 85%

EPSON Expression 636XL-3

EPSON Expression 836XL

Reliability:

Paper feeding and ejecting life:

100,000 sheets

safety

regulations:

CE marking:

Hinge: 100,000 close motions or more

UL1950,

CSA950,

FCC

Directive

89/336EEC,

92/31

EEC,

73/23

EEC

Weight:

Dimensions:

35 lb (16 kg)

23.6 x 20.8 x 4.8 inches

(6Olx529xl22mm)

Transparency Unit (B813102)

The transparency unit option allows you to scan slides,

negatives, and transparencies up to 11.4 x 16.5 inches

(A3

US B size). The transparency unit replaces the scanner cover

but still allows scanning of individual items.

TPutype:

Lamp movement scanning system with

the document fixed

Xe-gas cold cathode fluorescent lamp

11.4 x 16.5 inches (290 x 420 mm)

A3orUSBsize

Color filter separation

OX/G/B)

Positive or negative film

35 mm film (strip or mount)

Brownie

x5inch

x1Oinch

Lamp source:

MaXimum

document size:

Color separation

Document type:

Document size:

Power supply:

current

consumption:

Temperature:

Humidity

(without

condensation):

Reliability:

Weight

Dimensions:

Transportation

screws:

Supplied through scanner

(+24V/+5VDC)

+24VDC:

1.3A

+5VDC:

0.3A

Operation: 41 to

95O

F (5 to 35”

Storage: -13 to 140” F (-25 to 60” Cl

Operation: 10 to 80%

Storage: 10 to 85%

MCBF: Carriage = 100,000 returns

13.2 lb (6 kg)

25.8 x 17.8 x 2.24 inches

(656~452~57mm)

Mount in outside holes (marked

CLAMP), stored in inside holes (marked

STOW

Scanner Bundled Kits

The scanner is available in a bundled kit that includes

software for operating the

scannerinaPCorMaintosh

environment. The kit includes the following:

EPSON

ExpressionTM

836XL scanner

Adaptece SCSI board

SCSI cable

SCSI Select utility

EPSON TWAIN Pro driver software

(Windows and Macintosh)

LaserSoft

SilverFast@

for Expression 836XL Plug-in for

PhotoShope

(Windows and Macintosh1

Adobe@

Photoshop

(windows

and Macintosh)

Pixel Translation ISIS driver (Windows and Macintosh)

Monaco Systems color calibration software

(Windows and Macintosh)

Information Reference List

Engineering Change Notices

None

Product Support Bulletins

None

Technical

Support Bulletins

None

Epson B813102 User guide

Brand: Epson

Model: B813102

Category: Scanner Transparancy Adapters

Type: User guide

This manual is also suitable for

Expression 836XL

Download PDF

report

Epson B813102 User guide

This manual is also suitable for

Epson B813102 User guide

Related papers

Other documents