Draper 300264 Operating instructions

Draper
Brand
Draper
Model
300264
Category
Projector accessories
Type
Operating instructions
Copyright © 2011 Draper Inc. Form ScissorLiftSLX-TrimKit_Inst11 Printed in U.S.A.
Installation/Operating Instructions
Ceiling Trim Kit for Scissor Lift SLX by Draper
®
If you encounter any diffi culties installing or servicing your Scissor Lift SLX, call your
dealer or Draper, Inc. in Spiceland, In di ana, 765-987-7999, or fax 765-987-7142.
Installing Optional Ceiling Trim Kit "SLX"
The lower section of the Environmental Air Space Housing is available as part
of a ceiling trim kit, to fi nish out the ceiling opening even if a housing is not
necessary. This kit consists of the lower section of the housing and the ceiling
closure panel. Please refer to drawing below for these in struc tions.
① Install Scissor Lift SLX (as described in Scissor Lift SLX instructions).
② Install bottom section of Environmental Air Space Housing in opening. This
can be accomplished by suspending with wire, or by mounting directly to
the ceiling joists (if space permits).
③ Install ceiling closure panel (see separate instructions).
10
6
3
7
8
1
5
4
6
2
9
42" 42"
39
11
/16"
39
11
/16"
41
11
/16"
40
9
/16"
41
11
/16"
40
9
/16"
35
13
/16"
35
3
/8"
4"
20¼"
1
9
/16"
Top View
Side ViewFront/Back View
Item Qty Part Number Description
① 1 C028.546.07SA Frame, SLX Closure Trim
② 1 C044.181.07SA Panel, Assembled SLX Closure
③ 2 C002.845.07SA Bracket, SLX Closure
④ 8 C013.050 Washer .375" I.D. x .875" O.D. x
.064" TK GRD 2 Zinc Flat
⑤ 8 C020.082 Screw, 10-16 X ½"
6 Lobe Truss Head AB E-White
⑥ 16 C018.027 Nut
3
/
8
"-16 Hex Grd 2 NSF
⑦ 4 C020.322 Screw,
5
/
16
" - 18 x ¾" Long Grade 5 HH Zinc
⑧ 4 C018.045 Nut
5
/
16
"-18 Zinc Hex Keps
⑨ 1 C028.545.07SA Frame, SLX Trim Ring
⑩ 4 C077.037.49 Rod, Threaded
3
/
8
"-16 x 21
3
/
8
" L Zinc
Ceiling Trim Kit for Scissor Lift SLX by Draper page 2 of 2
www.draperinc.com
(765) 987-799
9
Installing Optional Ceiling Trim Kit "SLXR"
The lower section of the Environmental Air Space Housing is available as part
of a ceiling trim kit, to fi nish out the ceiling opening even if a housing is not
necessary. This kit consists of the lower section of the housing and the ceiling
closure panel. Please refer to drawing below for these in struc tions.
① Install Scissor Lift SLX (as described in Scissor Lift SLX instructions).
② Install bottom section of Environmental Air Space Housing in opening. This
can be accomplished by suspending with wire, or by mounting directly to
the ceiling joists (if space permits).
③ Install ceiling closure panel (see separate instructions).
48"
45
11
/16"
42"
39
11
/16"
41
13
/16"35
3
/8"
1
9
/16"
19¾"
Top View
Side ViewFront/Back View
10
3
1
6
9
7
8
2
6
4
5
Item Qty Part Number Description
① 1 C028.624.07SA Frame, SLXR Closure Trim
② 1 C044.205.07SA Panel, Assembled SLXR Closure
③ 2 C002.932.07SA Bracket, SLXR Closure
④ 8 C013.050 Washer .375" I.D. x .875" O.D. x
.064" TK GRD 2 Zinc Flat
⑤ 10 C020.082 Screw, 10-16 X ½"
6 Lobe Truss Head AB E-White
⑥ 16 C018.027 Nut
3
/
8
"-16 Hex Grd 2 NSF
⑦ 4 C020.322 Screw,
5
/
16
" - 18 x ¾" Long Grade 5 HH Zinc
⑧ 4 C018.045 Nut
5
/
16
"-18 Zinc Hex Keps
⑨ 4 C077.037.49 Rod, Threaded
3
/
8
"-16 x 21
3
/
8
" L Zinc
⑩ 1 C028.626.07SA Frame, SLXR Trim Ring
  • Page 1 1
  • Page 2 2

Draper 300264 Operating instructions

Draper
Brand
Draper
Model
300264
Category
Projector accessories
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents