Sony DCR-SR52E Owner's manual

Category
Camcorders
Type
Owner's manual
3-093-316-13(1)
Digital Video Camera Recorder
Handycam Handbook
DCR-SR32E/SR33E/SR42E/
SR52E/SR62E/SR72E/
SR82E/SR190E/SR200E/
SR290E/SR300E
© 2007 Sony Corporation
Enjoying your
camcorder
8
Getting Started
12
Recording/
Playback
20
Editing
38
Customizing your
camcorder
52
Performing with
a computer
73
Troubleshooting
94
Additional Information
108
Utilizing recording
media
49
Quick Reference
118
2
Read this before operating your camcorder
Before operating the unit, please read this
Handbook thoroughly, and retain it for
future reference.
Your camcorder is supplied with two
kinds of operations guides.
For operating and handling the camcorder,
refer to “Operating Guide” and “Handycam
Handbook” (PDF/this Handbook).
Types of “Memory Stick” you can use
in your camcorder
You can use “Memory Stick Duo” marked
with or
(p. 111).
“Memory Stick Duo”
(This size can be used with your
camcorder.)
“Memory Stick
(You cannot use it in your camcorder.)
• You cannot use any type of memory card
except “Memory Stick Duo.”
“Memory Stick PRO” and “Memory Stick
PRO Duo” can be used only with
“Memory Stick PRO” compatible
equipment.
• Do not attach a label or the like on a
“Memory Stick Duo” or a Memory Stick
Duo Adaptor.
When using a “Memory Stick Duo”
with “Memory Stick” compatible
equipment
Be sure to insert the “Memory Stick Duo”
into the Memory Stick Duo Adaptor.
Memory Stick Duo Adaptor
On using the camcorder
Do not hold the camcorder by the
following parts.
The camcorder is not dustproofed,
dripproofed or waterproofed. See “About
handling of your camcorder” (p. 114).
To prevent the hard disk from being
broken or recorded images from being
lost, do not do the following when either
of the respective lamps of the POWER
switch (p. 17) or the access lamp (p. 23,
27) is on:
to remove the battery pack or AC
Adaptor from the camcorder.
– to apply mechanical shock or vibration to
the camcorder.
Before connecting your camcorder to
another device with a USB cable etc., be
sure to insert the connector plug in the
proper direction. If you insert the
connector plug forcibly in the wrong
direction, the terminal may be damaged,
or this may cause a malfunction of your
camcorder.
Disconnect the AC Adaptor from the
Handycam Station holding both the
camcorder and the DC plug.
Be sure to turn the POWER switch to
OFF (CHG), when you set the camcorder
onto the Handycam Station or remove the
camcorder from it.
Notes on use
LCD screen Battery
3
About menu items, LCD panel and lens
A menu item that is grayed out is not
available under the current recording or
playback conditions.
The LCD screen is manufactured using
extremely high-precision technology, so
over 99.99% of the pixels are operational
for effective use. However, there may be
some tiny black points and/or bright
points (white, red, blue, or green in color)
that appear constantly on the LCD screen.
These points are normal results of the
manufacturing process and do not affect
the recording in any way.
Exposing the LCD screen or the lens to
direct sunlight for long periods of time
may cause malfunctions.
Do not aim at the sun. Doing so might
cause your camcorder to malfunction.
Take images of the sun only in low light
conditions, such as at dusk.
On recording
Before starting to record, test the
recording function to make sure the image
and sound are recorded without any
problems.
Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder,
recording media, etc.
TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need a PAL
system-based TV.
Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
You cannot play back both movies and
still images other than the images
recorded with your camcorder. You also
cannot play back images recorded with
other DCR-SR32E/SR33E/SR42E/
SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E.
About language setting
The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
necessary (p. 18).
About this Handbook
The LCD screens and indicators shown in
this Handbook were taken with a digital
still camera, and may look different from
what you actually see.
Design and specifications of recording
media and other accessories are subject to
change without notice.
Unless otherwise specially indicated,
illustrations in this Handbook are based
on DCR-SR300E.
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly by
Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF measurement system for
video cameras and offers a quality typical
of a Carl Zeiss lens.
Also, the lens for DCR-SR190E/SR200E/
SR290E/SR300E is T -coated to suppress
unwanted reflections, then faithfully
reproduce colors.
MTF = Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
Black point
White, red, blue or
green point
4
Notes on using the Hard Disk Drive Handycam
Save all your recorded image data
To prevent your image data from being lost,
save all your recorded images on external
media. It is recommended that you save the
image data on a disc such as DVD-R using your
computer (p. 77). Also, you can save your
image data using a VCR, or a DVD/HDD
recorder (p. 45).
It is recommended that you save your image
data periodically, after recording.
Do not apply shock or vibration to your
camcorder
The hard disk of the camcorder may not be
recognized, or recording or playback may not be
possible.
Especially, during recording/playback, do not
apply shock. After recording, do not apply
vibration or shock to the camcorder, while the
ACCESS lamp is lit.
When using the shoulder belt (not supplied), do
not crash the camera against an object.
On the drop sensor
To protect the internal hard disk from the shock
by dropping, the camcorder has the drop sensor
function (p. 64). When a drop occurs, or under a
non-gravity condition, the block noise to protect
the camcorder may also be recorded. If the drop
sensor catches a drop repeatedly, recording/
playback may be stopped.
Notes on battery pack/AC Adaptor
While the ACCESS lamp is lit, be sure to avoid
the following. They may cause malfunctions.
Removing the battery pack
Removing the AC Adaptor (while charging
the battery pack using the AC Adaptor)
Be sure to remove the battery pack or the AC
Adaptor after turning off the POWER switch.
Note on operating temperatures
When the temperature of the camcorder
becomes extremely high or extremely low, you
may not be able to record or play back on the
camcorder, due to the protection features of the
camcorder being activated in such situations. In
this case, a message appears on the LCD screen
(p. 104).
When the camcorder is connected to a
computer
Do not try to format the hard disk of the
camcorder using a computer. If you do so, your
camcorder may not operate correctly.
Note on using the camcorder at high
altitudes
Do not turn on the camcorder in a low-pressure
area, where the altitude is more than 3,000
meters (9,800 feet). Doing so may damage the
hard disk drive of your camcorder.
Note on disposal/transfer
If you perform [ FORMAT] (p.49) or
formatting the hard disk of the camcorder, you
may not delete data from the hard disk
completely. When you transfer the camcorder, it
is recommended that you perform
[ EMPTY] (p.51) to prevent the recovery of
your data.
In addition to the above, when you dispose of
the camcorder, it is recommended that you
destroy the actual body of the camcorder.
If you cannot record/play back
images, perform [ FORMAT]
If you repeat recording/deleting images for a
long time, fragmentation of data occurs on the
hard disk. Images cannot be saved or recorded.
In such a case, save your images on some type
of external media first (p. 37), and then perform
[ FORMAT] (p. 49).
Fragmentation 1 Glossary (p. 127)
5
Table of Contents
Read this before operating your
camcorder .......................................2
Notes on using the Hard Disk Drive
Handycam ......................................4
Subject examples and solutions .....7
Operation flow ................................8
HOME” and “ OPTION”
- Taking advantage of two types of
menus .............................................9
Step 1: Checking supplied
items ...................................12
Step 2: Charging the battery
pack ....................................13
Step 3: Turning the power on, and
setting the date and time ....17
Changing the language
setting ....................................... 18
Step 4: Preparing for recording ....19
Recording and playback with ease
(Easy Handycam operation) .........20
Recording .....................................23
Zooming .................................... 25
Recording sound with more
presence (5.1ch surround
recording) (DCR-SR190E/SR200E/
SR290E/SR300E) ...................... 25
Using the flash (DCR-SR190E/
SR200E/SR290E/SR300E) ........ 26
Capturing high quality still images
during movie recording (Dual Rec)
(DCR-SR190E/SR200E/SR290E/
SR300E) .................................... 26
Recording still images on a
“Memory Stick Duo” .................. 27
Recording in dark places
(NightShot plus/NightShot) ....... 27
Adjusting the exposure for backlit
subjects ..................................... 28
Recording in mirror mode ......... 28
Selecting the aspect ratio (16:9 or
4:3) of the recording image ...... 28
Recording the fast action in
slow-motion (SMTH SLW REC)
(DCR-SR190E/SR200E/SR290E/
SR300E) .................................... 29
Playback .......................................31
Using PB zoom ......................... 33
Searching for desired images by
date (Date Index) ...................... 33
Playing back a series of still images
(Slide show) .............................. 34
Playing the image on a TV ............35
Saving images ..............................37
(OTHERS) category .................38
Deleting images ............................38
Dividing a movie ...........................40
Copying still images ......................41
Creating the Playlist ......................42
Dubbing to VCR or DVD/HDD
recorders .......................................45
Printing recorded images (PictBridge
compliant printer) ..........................46
(MANAGE HDD/MEMORY)
category ........................................49
Formatting the hard disk or the
“Memory Stick Duo” ......................49
Checking the hard disk
information ....................................50
Preventing data on the hard disk of
the camcorder from being
recovered ......................................51
Enjoying your camcorder
Getting Started
Recording/Playback
Editing
Utilizing recording media
6
What you can do with the
(SETTINGS) category of the
HOME MENU ............................... 52
Using the HOME MENU ............ 52
List of the (SETTINGS) category
items .......................................... 53
MOVIE SETTINGS ....................... 54
(Items for recording movies)
PHOTO SETTINGS ..................... 57
(Items for recording still images)
VIEW IMAGES SET ..................... 60
(Items to customize the display)
SOUND/DISP SET ....................... 61
(Items to adjust beep and the
screen)
OUTPUT SETTINGS ................... 62
(Items for when connecting other
devices)
CLOCK/ LANG .......................... 63
(Items to set clock and language)
GENERAL SET ............................ 64
(Other setup items)
Activating functions using the
OPTION MENU ....................... 65
Using the OPTION MENU ......... 65
Recording items on the OPTION
MENU ........................................ 66
Viewing items on the OPTION
MENU ........................................ 66
Functions set in
the OPTION MENU ...................... 67
What you can do with Windows
computer ...................................... 73
System requirements ................... 74
Installing the software .................. 75
Creating a DVD with One Touch
...................................................... 77
Importing images to a computer ... 81
Deleting images recorded on the
camcorder through the computer
(DCR-SR42E/SR62E/SR82E/
SR200E/SR300E) ........................ 85
Viewing images imported to a
computer ...................................... 86
Editing the imported images ......... 88
Creating and copying a DVD ........ 90
Manipulating still images .............. 93
Troubleshooting ............................ 94
Warning indicators and
messages ................................... 104
Using your camcorder abroad ....108
Files on the camcorder hard disk/
folder structure ........................... 110
Maintenance and precautions .... 111
Identifying parts and controls ..... 118
Indicators displayed during
recording/playback ..................... 123
Glossary ..................................... 127
Index ...........................................128
Customizing your camcorder
Performing with a computer
Troubleshooting
Additional Information
Quick Reference
7
Subject examples and solutions
* DCR-SR190E/SR200E/SR290E/SR300E
** DCR-SR32E/SR33E/SR42E/SR52E/SR62E/SR72E/SR82E
Checking your golf
swing
Getting a good
shot of a ski slope
or beach
B SMTH SLW REC* ......................29
B SPORTS** ............................... 69
B Backlight ...................................28
B BEACH.......................................69
B SNOW .......................................69
Capturing still
images during
movie recording
A child on the
stage under a spot
light
B Dual Rec*..................................26 B SPOTLIGHT...............................69
Flowers in close-
up
Fireworks with all
its splendor
B PORTRAIT .................................69
B FOCUS.......................................67
B TELE MACRO.............................67
B FIREWORKS..............................69
B FOCUS.......................................67
Focusing on the
dog on the left
side of the screen
A sleeping child
under dim light
B FOCUS.......................................67
B SPOT FOCUS .............................67
B NightShot plus** ......................27
B NightShot*................................27
B COLOR SLOW SHTR .................70
8
Enjoying your camcorder
Operation flow
B Get ready (p. 12).
B Shoot using your camcorder (p. 23).
Movies are recorded on the hard disk, and still images are
recorded on either the hard disk or a “Memory Stick Duo.”
B Play back the images.
x Viewing on the LCD screen of your camcorder (p. 31)
x Viewing on the TV connected to your camcorder
(p. 35)
B Save recorded images.
x Saving images on a DVD using a computer (p. 77)
x Importing images to a computer (p. 81)
x Dubbing images on VCR or DVD/HDD recorders (p. 45)
B Delete images.
If the hard disk of your camcorder is full, you cannot
record new images. Delete the image data that has been
saved on your camcorder. If you delete the images, you can
record new images on the free hard disk space again.
x Deleting the selected images (p. 38)
x Deleting all the images ([ FORMAT], p. 49)
9
Enjoying your camcorder
Enjoying your camcorder
HOME” and “ OPTION
- Taking advantage of two types of menus
B Categories and items of the HOME MENU
(CAMERA) category
(VIEW IMAGES) category
(OTHERS) category
(MANAGE HDD/MEMORY) category
(SETTINGS) category
To customize your camcorder (p. 52)*.
* You can also set these items during Easy
Handycam operation (p. 20). For the items
available in the (SETTINGS) category, see
page 53.
**DCR-SR190E/SR200E/SR290E/SR300E
HOME MENU” - the starting point for operations with your
camcorder
(HELP)
Displays a description of the item (p. 10)
Category
Item Page
MOVIE* 24
PHOTO* 24
SMTH SLW REC** 29
Item Page
VISUAL INDEX* 31
PLAYLIST 42
Item Page
DELETE* 38
EDIT 40, 41
PLAYLIST EDIT 42
PRINT 46
COMPUTER 73
Item Page
FORMAT* 49
FORMAT* 50
INFO 50
10
1 While pressing the green button
in the center, turn the POWER
switch in the direction of the
arrow to turn on the power.
2 Press (HOME) A (or B).
3 Touch the desired category.
Example: (OTHERS) category
4 Touch the desired item.
Example: [EDIT]
5 Follow the guide on the screen for
further operation.
To hide the HOME MENU screen
Touch .
B When you want to know something
about the function of each item on
the HOME MENU - HELP
1 Press (HOME).
The HOME MENU appears.
2 Touch (HELP).
The bottom of the (HELP) button
turns orange.
Using the HOME MENU
(HOME) A
(HOME) B
11
Enjoying your camcorder
3 Touch the item you want to know
the content.
When you touch an item, its explanation
appears on the screen.
To apply the option, touch [YES],
otherwise, touch [NO].
To deactivate the HELP
Touch (HELP) again in step 2.
Just a touch on the screen during shooting
or playback displays the functions available
at that moment. You will find it easy to
make various settings. See page 65 for
further details.
Using the OPTION MENU
(OPTION)
12
Getting Started
Step 1: Checking supplied items
Make sure that you have the following
items supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
AC Adaptor (1) (p. 13)
Mains lead (1) (p. 13)
Handycam Station (1) (p. 13)
A/V connecting cable (1) (p. 35, 45)
USB cable (1) (p. 46, 78, 81)
Wireless Remote Commander (1) (p. 122)
(except for DCR-SR32E/SR33E/SR42E)
A button-type lithium battery is already installed.
Rechargeable battery pack
NP-FH40 (1) (p. 13, 112) (DCR-SR32E/
SR33E/SR42E/SR52E/SR62E/SR72E/
SR82E)
NP-FH60 (1) (p. 13, 112) (DCR-SR190E/
SR200E/SR290E/SR300E)
21-pin adaptor (p. 36)
For the model with the mark printed on their
bottom surfaces only.
CD-ROM “Handycam Application
Software” (1) (p. 73)
Picture Motion Browser (Software)
Handycam Handbook (This Handbook)
Operating Guide (1)
13
Getting Started
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 112) after
attaching it to your camcorder.
b Notes
Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1 Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
2 Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (The default setting).
3 Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
4 Connect the mains lead to the AC
Adaptor and the wall socket.
5 Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts.
The CHG (charge) lamp turns off when
the battery pack is fully charged.
When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
1
2
3
4
5
5
POWER
switch
DC IN jack
DC plug
AC Adaptor
Mains lead
To the wall socket
CHG
(charge)
lamp
Battery
14
To charge the battery pack using only
the AC Adaptor
Turn the POWER switch to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.
b Notes
Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
b Notes
When you remove the battery pack or the AC
Adaptor, make sure that the (Movie) lamp/
(Still) lamp (p. 23) is turned off.
To remove your camcorder from the
Handycam Station
Turn off the power, then remove the
camcorder from the Handycam Station
holding both.
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (see page 113 for the
details of storage).
To use an outside power source
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
POWER switch
DC IN jack
CHG (charge)
lamp
DC plug
Battery pack
AC Adaptor
To the wall socket
Open the
jack cover
Mains lead
BATT (battery)
release lever
15
Getting Started
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
* DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E
** DCR-SR190E/SR200E/SR290E/SR300E
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-SR32E/SR33E/SR42E:
DCR-SR52E/SR62E/SR72E/SR82E:
DCR-SR190E/SR200E:
DCR-SR290E/SR300E:
Battery pack Charging time
NP-FH40
(supplied*)
125
NP-FH50 135
NP-FH60
(supplied**)
135
NP-FH70 170
NP-FH100 390
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
105 50
NP-FH50 125 60
NP-FH70 270 135
NP-FH100 615 305
Remaining battery (approx.)
Recording capacity (approx.)
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
90 45
100 50
NP-FH50 105 50
115 55
NP-FH70 230 115
245 120
NP-FH100 525 260
565 280
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH50 85 40
90 45
NP-FH60
(supplied)
115 55
125 60
NP-FH70 190 95
200 100
NP-FH100 440 220
465 230
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH50 75 35
80 40
NP-FH60
(supplied)
100 50
105 50
NP-FH70 160 80
170 85
NP-FH100 375 185
395 195
16
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b Notes
All times measured with recording mode [SP]
under the following conditions:
Top: When the LCD backlight turns on.
Bottom: When the LCD backlight turns off
(except for DCR-SR32E/SR33E/SR42E).
Playback time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-SR32E/SR33E/SR42E:
DCR-SR52E/SR62E/SR72E/SR82E:
DCR-SR190E/SR200E:
DCR-SR290E/SR300E:
* When the LCD backlight is on.
On the battery pack
Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/ (Still) lamp (p. 23).
The CHG (charge) lamp flashes during
charging, or Battery Info (p. 14) will not be
correctly displayed under the following
conditions:
The battery pack is not attached correctly.
The battery pack is damaged.
The battery pack is worn-out (For Battery
Info only).
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder or the Handycam
Station, even when the mains lead is
disconnected from the wall socket.
When attaching an optional video light, it is
recommended that you use an NP-FH70/FH100
battery pack (except for DCR-SR32E/SR33E/
SR42E).
We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
Battery pack Playback time
NP-FH40
(supplied)
120
NP-FH50 140
NP-FH70 300
NP-FH100 695
Battery pack Playback time*
NP-FH40
(supplied)
110
NP-FH50 130
NP-FH70 280
NP-FH100 635
Battery pack Playback time*
NP-FH50 125
NP-FH60
(supplied)
165
NP-FH70 270
NP-FH100 615
Battery pack Playback time*
NP-FH50 120
NP-FH60
(supplied)
160
NP-FH70 255
NP-FH100 590
17
Getting Started
On the AC Adaptor
Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
Step 3: Turning the
power on, and setting
the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
1 While pressing the green button,
turn the POWER switch
repeatedly in the direction of the
arrow until the respective lamp
lights up.
(Movie): To record movies
(Still): To record still images
The [CLOCK SET] screen appears.
2 Select the desired geographical
area with v/V, then touch [NEXT].
POWER switch
Lens cover
Touch the button on
the LCD screen.
18
3 Set [SUMMERTIME], then touch
[NEXT].
4 Set [Y] (year) with v/V.
5 Select [M] with b/B, then set the
month with v/V.
6 Set [D] (day), hour and minute in
the same way, then touch [NEXT].
7 Make sure that the clock is
correctly set, then touch .
The clock starts.
You can set any year up to the year
2037.
To turn off the power
Turn the POWER switch to OFF (CHG).
To reset the date and time
Touch (HOME) t (SETTINGS)
t [CLOCK/ LANG] t [CLOCK
SET], and set the date and time.
b Notes
If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the built-in rechargeable battery and then
set the date and time again (p. 116).
It takes a few seconds for your camcorder to be
ready to shoot after the power is turned on. You
cannot operate your camcorder during this time.
The lens cover opens automatically when the
power is turned on (DCR-SR190E/SR200E/
SR290E/SR300E). It closes when the playback
screen is selected, or the power is turned off.
In the setting at the time of purchase, the power
turns off automatically if you leave your
camcorder without any operation attempted for
approximately 5 minutes, to save battery power
([A.SHUT OFF], p. 64).
z Tips
The date and time does not appear during
recording, but they are automatically recorded
on the hard disk, and can be displayed during
playback ([DATA CODE], p. 60).
Refer to page 109 for information concerning
“World time difference.”
If the buttons on the touch panel do not work
correctly, adjust the touch panel
(CALIBRATION) (p. 115).
You can change the on-screen displays to
show messages in a specified language.
Touch (HOME) t (SETTINGS)
t [CLOCK/ LANG] t
[ LANGUAGE SET], then select the
desired language.
Changing the language setting
19
Getting Started
Step 4: Preparing for recording
Slide the lens cover switch to open.
z Tips
When you finish recording or when you
playback images, close the lens cover.
For DCR-SR190E/SR200E/SR290E/SR300E,
the lens cover opens and closes automatically.
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it to the best
angle to record or play (2).
To turn off the LCD backlight to make
the battery last longer (except for
DCR-SR32E/SR33E/SR42E)
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use your
camcorder in bright conditions or when you
want to save battery power. The recorded
image will not be affected by the setting. To
turn on the LCD backlight, press and hold
DISP/BATT INFO for a few seconds until
disappears.
b Notes
Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
z Tips
If you open the LCD panel 90 degrees to the
camcorder, then rotate it 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
Touch (HOME) t (SETTINGS) t
[SOUND/DISP SET] t [LCD BRIGHT]
(p. 61), and adjust the brightness of the LCD
screen.
The information is displayed or hidden (display
y no display) each time you press DISP/
BATT INFO.
Fasten the grip belt and hold your
camcorder correctly.
Opening the lens cover
manually (DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/SR72E/
SR82E)
Adjusting the LCD panel
Lens cover switch
190 degrees to the
camcorder
2180 degrees
(max.)
290 degrees
(max.)
DISP/BATT INFO
Fastening the grip belt
20
Recording/Playback
Recording and playback with ease
(Easy Handycam operation)
Easy Handycam operation makes nearly all settings automatic so that you can perform
recording or playback operation without detailed settings. It also makes screen font size larger
for easy viewing.
1 Turn the POWER
switch G until the
(Movie) lamp lights up.
2 Press EASY A.
3 Press START/STOP H (or E) to
start recording.*
To stop recording, press START/STOP
again.
Still images are recorded on the hard disk in
the default setting. You can change the
recording media of still images to a
“Memory Stick Duo” (p. 27).
1 Turn the POWER
switch G until the
(Still) lamp lights up.
2 Press EASY A .
3
Press PHOTO F lightly to adjust
the focus
A
(a beep sounds), then
press it fully
B
(a shutter click
sounds).**
* The setting of [REC MODE] is fixed to [SP] (p. 54).
** The setting of [ QUALITY] is fixed to [FINE] (p. 58).
Open the lens cover (DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/SR72E/SR82E) (p. 19)
If the POWER switch is set to OFF (CHG),
turn it while pressing the green button.
Recording movies
appears on
the LCD screen.
[STBY] b [REC]
Recording still images
appears on
the LCD screen.
Flashing b Lights up
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131

Sony DCR-SR52E Owner's manual

Category
Camcorders
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI