Motorola RFS Series Reference guide

M

Motorola RFS Series Wireless LAN Switches

WiNG System Reference Guide

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Symbol is a registered

trademark of Symbol Technologies, Inc. All other product or service names are the property of their respective owners.

Contents

Chapter 1. Overview

1.1 Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.1.1 Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.2 Software Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

1.2.1 Infrastructure Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

1.2.2 Wireless Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

1.2.3 Wired Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18

1.2.4 Management Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19

1.2.5 Security Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20

1.2.6 Supported Access Ports/Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26

Chapter 2. Switch Web UI Access and Image Upgrades

2.1 Accessing the Switch Web UI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1.1 Web UI Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1.2 Connecting to the Switch Web UI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.2 Switch Password Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

2.3 Upgrading the Switch Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.4 Auto Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.5 AP-4131 Access Point to Access Port Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Chapter 3. Switch Information

3.1 Viewing the Switch Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1.1 Setting the Switch Country Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

3.1.2 Viewing the Switch Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

3.1.3 Switch Dashboard Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

3.1.4 Viewing Switch Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

3.2 Viewing Switch Port Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

3.2.1 Viewing the Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

3.2.2 Viewing the Ports Runtime Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

3.2.3 Reviewing Port Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

3.2.4 Power over Ethernet (PoE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

3.2.5 Editing Port PoE Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23

3.3 Viewing Switch Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24

3.3.1 Viewing the Detailed Contents of a Config File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25

3.3.2 Transferring a Config File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26

3.4 Viewing Switch Firmware Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28

3.4.1 Editing the Switch Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29

3.4.2 Enabling Global Settings for the Image Failover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

TOC-2 Motorola RF Switch System Reference Guide

3.4.3 Updating the Switch Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

3.5 Switch File Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32

3.5.1 Transferring Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32

3.5.2 Viewing Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35

3.6 Configuring Automatic Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-37

3.7 Viewing the Switch Alarm Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-40

3.7.1 Viewing Alarm Log Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-41

3.8 Viewing Switch Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-42

3.9 How to use the Filter Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-44

Chapter 4. Network Setup

4.1 Displaying the Network Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

4.2 Viewing Network IP Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

4.2.1 Configuring DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

4.2.2 Configuring IP Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

4.2.3 Viewing Address Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

4.3 Viewing and Configuring Layer 2 Virtual LANs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

4.3.1 Viewing and Configuring VLANs by Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

4.3.2 Editing the Details of an Existing VLAN by Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

4.3.3 Viewing and Configuring Ports by VLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

4.4 Configuring Switch Virtual Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

4.4.1 Configuring the Virtual Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

4.4.2 Viewing Virtual Interface Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

4.5 Viewing and Configuring Switch WLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

4.5.1 Configuring WLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

4.5.2 Viewing WLAN Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-56

4.5.3 Configuring WMM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62

4.5.4 Configuring the NAC Inclusion List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-66

4.5.5 Configuring the NAC Exclusion List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-70

4.5.6 NAC Configuration Examples Using the Switch CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-73

4.6 Viewing Associated MU Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-76

4.6.1 Viewing MU Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-76

4.6.2 Configuring Mobile Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-79

4.6.3 Viewing MU Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-81

4.7 Viewing Access Port Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-85

4.7.1 Configuring Access Port Radios. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-85

4.7.2 Viewing AP Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-96

4.7.3 Configuring WLAN Assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-100

4.7.4 Configuring WMM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-102

4.7.5 Configuring Access Point Radio Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-105

4.7.6 Configuring Radio Groups for MU Load Balancing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-106

4.7.7 Viewing Active Calls (AC) Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-107

4.7.8 Viewing Mesh Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-108

4.7.9 Smart RF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-109

4.7.10 Voice Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-119

4.8 Viewing Access Port Adoption Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-121

4.8.1 Configuring AP Adoption Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-121

4.8.2 Configuring Layer 3 Access Port Adoption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-128

TOC-3

4.8.3 Configuring WLAN Assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-128

4.8.4 Configuring WMM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-130

4.9 Configuring Access Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-132

4.9.1 Viewing Adopted Access Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-132

4.9.2 Viewing Unadopted Access Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-134

4.9.3 Viewing Sensor Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-136

4.9.4 Configuring Secure WiSPe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-136

4.9.5 Configuring Adaptive AP Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-138

4.10 Multiple Spanning Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-140

4.10.1 Configuring a Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-141

4.10.2 Viewing and Configuring Bridge Instance Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-143

4.10.3 Configuring a Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-145

4.10.4 Viewing and Configuring Port Instance Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-149

Chapter 5. Switch Services

5.1 Displaying the Services Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

5.2 DHCP Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

5.2.1 Configuring the Switch DHCP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

5.2.2 Viewing the Attributes of Existing Host Pools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

5.2.3 Configuring Excluded IP Address Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

5.2.4 Configuring the DHCP Server Relay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13

5.2.5 Viewing DDNS Bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15

5.2.6 Viewing DHCP Bindings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

5.2.7 Reviewing DHCP Dynamic Bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17

5.2.8 Configuring the DHCP User Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19

5.2.9 Configuring DHCP Pool Class. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21

5.3 Configuring Secure NTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24

5.3.1 Defining the SNTP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24

5.3.2 Configuring Symmetric Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26

5.3.3 Defining a NTP Neighbor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27

5.3.4 Adding an NTP Neighbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29

5.3.5 Viewing NTP Associations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31

5.3.6 Viewing NTP Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33

5.4 Configuring Switch Redundancy & Clustering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34

5.4.1 Configuring Redundancy Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-36

5.4.2 Reviewing Redundancy Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-39

5.4.3 Configuring Redundancy Group Membership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42

5.4.4 Redundancy Group License Aggregation Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-45

5.4.5 Managing Clustering Using the Web UI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-47

5.5 Layer 3 Mobility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-47

5.5.1 Configuring Layer 3 Mobility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-49

5.5.2 Defining the Layer 3 Peer List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-51

5.5.3 Reviewing Layer 3 Peer List Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-52

5.5.4 Reviewing Layer 3 MU Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-53

5.6 Configuring Self Healing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-54

5.6.1 Configuring Self Healing Neighbor Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-56

5.7 Configuring Switch Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-58

5.7.1 Configuring Discovery Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-59

5.7.2 Viewing Discovered Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-61

TOC-4 Motorola RF Switch System Reference Guide

5.8 Locationing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-64

5.8.1 RTLS Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-64

5.8.2 SOLE - Smart Opportunistic Location Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-64

5.8.3 Defining Site Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-65

5.8.4 Configuring SOLE Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-67

5.8.5 Configuring Aeroscout Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-69

5.8.6 Configuring Newbury Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-71

Chapter 6. Switch Security

6.1 Displaying the Main Security Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

6.2 AP Intrusion Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

6.2.1 Enabling and Configuring AP Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

6.2.2 Approved APs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

6.2.3 Unapproved APs (AP Reported) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

6.2.4 Unapproved APs (MU Reported) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

6.2.5 AP Containment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

6.3 MU Intrusion Detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

6.3.1 Configuring MU Intrusion Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

6.3.2 Viewing Filtered MUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

6.4 Configuring Wireless Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

6.4.1 Editing an Existing Wireless Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16

6.4.2 Adding a new Wireless Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17

6.4.3 Associating an ACL with WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18

6.5 Configuring Firewalls and Access Control Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-19

6.5.1 ACL Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-19

6.5.2 Configuring the Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22

6.5.3 Attaching an ACL Layer 2/Layer 3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-27

6.5.4 Attaching an ACL on a WLAN Interface/Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28

6.5.5 Reviewing ACL Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-30

6.6 Configuring NAT Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-33

6.6.1 Defining Dynamic NAT Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-33

6.6.2 Defining Static NAT Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-36

6.6.3 Configuring NAT Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-39

6.6.4 Viewing NAT Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-40

6.7 Configuring IKE Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-42

6.7.1 Defining the IKE Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-42

6.7.2 Setting IKE Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-44

6.7.3 Viewing SA Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-47

6.8 Configuring IPSec VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-49

6.8.1 Defining the IPSec Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-50

6.8.2 Defining the IPSec VPN Remote Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-55

6.8.3 Configuring IPSEC VPN Authentication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-56

6.8.4 Configuring Crypto Maps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-58

6.8.5 Viewing IPSec Security Associations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-68

6.9 Configuring the Radius Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-70

6.9.1 Radius Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-70

6.9.2 Using the Switch’s Radius Server Versus an External Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-72

6.9.3 Defining the Radius Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-73

6.9.4 Configuring Radius Authentication and Accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-75

TOC-5

6.9.5 Configuring Radius Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-78

6.9.6 Configuring Radius User Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-80

6.9.7 Viewing Radius Accounting Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-83

6.10 Creating Server Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-84

6.10.1 Using Trustpoints to Configure Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-85

6.10.2 Configuring Trustpoint Associated Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-93

6.11 Configuring Enhanced Beacons and Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-95

6.11.1 Configuring the Beacon Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-95

6.11.2 Configuring the Probe Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-98

6.11.3 Reviewing Found Beacons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-99

6.11.4 Reviewing Found Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-100

Chapter 7. Switch Management

7.1 Displaying the Management Access Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

7.2 Configuring Access Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

7.3 Configuring SNMP Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

7.3.1 Configuring SNMP v1/v2 Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

7.3.2 Configuring SNMP v3 Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

7.3.3 Accessing SNMP v2/v3 Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9

7.4 Configuring SNMP Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10

7.4.1 Enabling Trap Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10

7.4.2 Configuring Trap Thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14

7.5 Configuring SNMP Trap Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17

7.5.1 Editing SNMP Trap Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18

7.5.2 Adding SNMP Trap Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18

7.6 Configuring Management Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20

7.6.1 Configuring Local Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20

7.6.2 Configuring Switch Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-26

Chapter 8. Diagnostics

8.1 Displaying the Main Diagnostic Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

8.1.1 Switch Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

8.1.2 CPU Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

8.1.3 Switch Memory Allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

8.1.4 Switch Disk Allocation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5

8.1.5 Switch Memory Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5

8.1.6 Other Switch Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

8.2 Configuring System Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

8.2.1 Log Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

8.2.2 File Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

8.3 Reviewing Core Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

8.3.1 Transferring Core Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

8.4 Reviewing Panic Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

8.4.1 Viewing Panic Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16

8.4.2 Transferring Panic Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16

8.5 Debugging the Applet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18

8.6 Configuring a Ping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19

8.6.1 Modifying the Configuration of an Existing Ping Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20

TOC-6 Motorola RF Switch System Reference Guide

8.6.2 Adding a New Ping Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-21

8.6.3 Viewing Ping Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22

Appendix A. Customer Support

Appendix B. Adaptive AP

Appendix C. Troubleshooting Information

About This Guide

Introduction

This guide provides information about using the following Motorola switches and version numbers:

• WS5100 3.3

• RFS6000 3.3

• RFS7000 1.3

Documentation Set

The documentation set for the Motorola RF Series Switches is partitioned into the following guides to

provide information for specific user needs.

• Installation Guides - Each switch has a unique Installation Guide which describes the basic hardware

setup and configuration required to transition to more advanced configuration of the switches.

• Motorola RFS Series Wireless LAN Switches WiNG System Reference - Describes configuration

of the Motorola RF Switches using the Web UI.

• Motorola RFS Series Wireless LAN Switches WiNG CLI Reference - Describes the Command Line

Interface (CLI) and Management Information Base (MIB) commands used to configure the Motorola RF

Switches.

• RF Management Software Users Guide - Describes how to use Motorola RFMS to set up and monitor

your switch in respect to areas of good RF throughput and defined physical barriers.

Document Conventions

The following conventions are used in this document to draw your attention to important information:

NOTE: Screens and windows pictured in this guide are samples and can differ from actual

screens.

NOTE: Indicate tips or special requirements.

SWITCH NOTE: Indicates caveats unique to a WS5100, RFS6000 or RFS7000 model

switch.

viii Motorola RF Switch System Reference

Notational Conventions

The following additional notational conventions are used in this document:

• Italics are used to highlight the following:

• Chapters and sections in this and related documents

• Dialog box, window and screen names

• Drop-down list and list box names

• Check box and radio button names

• Icons on a screen.

• GUI text is used to highlight the following:

• Screen names

• Menu items

• Button names on a screen.

• bullets (•) indicate:

• Action items

• Lists of alternatives

• Lists of required steps that are not necessarily sequential

• Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.

CAUTION: Indicates conditions that can cause equipment damage or data loss.

WARNING! Indicates a condition or procedure that could result in personal

injury or equipment damage.

!

Overview

A Motorola RF Switch is a centralized management solution for wireless networking. It connects to

non-legacy Access Ports through Layer 2 or Layer 3 (Layer 2 is preferable, if the situation allows it).

Access ports function as radio antennas for data traffic management and routing. System configuration and

intelligence for the wireless network resides with the switch. The switch uses Access Ports to bridge data

to and from wireless devices. The wireless switch applies appropriate policies to data packets before

forwarding them to their destination.

All data packets to and from wireless devices are processed by the switch, where appropriate policies are

applied before they are decapsulated and sent to their destination.

Access port configuration is managed by the switch through a Web UI Graphical User Interface (GUI), SNMP

or the switch Command Line Interface (CLI).

SWITCH NOTE: The discussion of the switch GUI within this guide is presented

generically, making it equally relevant to the WS5100, RFS6000 and RFS7000 switch

platforms. However, some subtle differences do exist amongst these baselines. These

differences are noted within the specific GUI elements impacted. When these differences

are noted, the options available to each switch baseline are described in detail.

1-2 Motorola RF Switch Systen Reference

1.1 Hardware Overview

The WS5100, RFS6000 and RFS7000 are rack-mountable devices that manage all inbound and outbound

traffic on the wireless network. They provide security, network service and system management

applications.

Unlike traditional wireless infrastructure devices that reside at the edge of a network, the switch uses

centralized, policy-based management to apply sets of rules or actions to all devices on the wireless

network. The switch collects management “intelligence” from individual Access Ports/Points and moves the

collected information to the centralized switch.

Access ports (APs) are 48V Power-over-Ethernet devices connected to the switch by an Ethernet cable. An

Access Port receives 802.11x data from MUs and forwards the data to the switch which applies the

appropriate policies and routes the packets to their destinations.

Access ports do not have software or firmware upon initial receipt from the factory. When the Access Port

is first powered on and cleared for the network, the switch initializes the Access Port and installs a small

firmware file automatically. Therefore, installation and firmware upgrades are automatic and transparent.

1.1.1 Physical Specifications

The physical dimensions and operating parameters of the WS5100 include:

The physical dimensions and operating parameters of the RFS6000 include:

The physical dimensions and operating parameters of the RFS7000 include:

Width 42.9 cm (16.89 in)

Height 4.39 cm (1.73 in)

Depth 40.46 cm (15.93 in)

Weight 6.25 kg (13.75 lbs)

Operating Temperature 10°C - 35°C (50°F - 95°F)

Operating Humidity 5% - 85% RH, non-condensing

Width 440mm (17.32 in)

Height 44.45mm (1.75 in)

Depth 390.8mm (15.38 in)

Weight 6.35 Kg (14 lbs)

Operating Temperature 0°C - 40°C (32°F - 104°F)

Operating Humidity 5% - 85% RH, non-condensing

Width 440mm (17.32 in)

Height 44.45mm (1.75 in)

Depth 390.8mm (15.38 in)

Weight 6.12 Kg (13.5 lbs)

Overview 1-3

A power cord is not supplied with a WS5100, RFS6000 or RFS7000 model switch. Use only a correctly rated

power cord certified for the country of operation

.

Operating Temperature 0°C - 40°C (32°F - 104°F)

Operating Humidity 5% - 85% RH, non-condensing

1-4 Motorola RF Switch Systen Reference

1.1.1.1 Power Protection

To best protect the switch from unexpected power surges or other power-related problems, ensure the

switch installation meets the following guidelines:

• If possible, use a dedicated circuit to protect data processing equipment. Commercial electrical

contractors are familiar with wiring for data processing equipment and can help with the load balancing

of dedicated circuits.

• Install surge protection. Use a surge protection device between the electricity source and the switch.

• Install an Uninterruptible Power Supply (UPS). A UPS provides continuous power during a power outage.

Some UPS devices have integral surge protection. UPS equipment requires periodic maintenance to

ensure reliability.

1.1.1.2 Cabling Requirements

A minimum of one category 6 Ethernet cables (not supplied) are required to connect the switch to the LAN

and WLAN. The cable(s) are used with the Ethernet ports on the front panel of the switch.

The console cable included with the switch connects the switch to a computer running a serial terminal

emulator program to access the switch’s Command Line Interface (CLI) for initial configuration. An initial

configuration is described within the Installation Guide shipped with each switch.

1.2 Software Overview

The switch includes a robust set of features. The features are listed and described in the following sections:

• Infrastructure Features

• Wireless Switching

• Wired Switching

• Management Features

• Security Features

• Supported Access Ports/Points

1.2.1 Infrastructure Features

The switch includes the following Infrastructure features:

SWITCH NOTE: On an RFS6000 and RFS7000, Motorola recommends connecting via the

Management Ethernet (ME) interface to better ensure secure and easier management.

The ME interface is connected to the management VLAN, and is therefore separate from

production VLANs.

SWITCH NOTE: On the RFS6000 the Uplink (UP) port is the preferred method of

connecting the switch to the network. The Uplink port has its own dedicated 1Gbps

connection which is unaffected by internal traffic across the GE ports.

NOTE: The Motorola RF Management Software is a recommended utility to plan the

deployment of the switch and view its configuration once operational in the field.

Motorola RFMS can help optimize the positioning and configuration of a switch in respect

to a WLAN’s MU throughput requirements and can help detect rogue devices. For more

information, refer to the Motorola Web site.

Overview 1-5

• Installation Feature

• Licensing Support

• Configuration Management

• Diagnostics

• Serviceability

• Tracing / Logging

• Process Monitor

• Hardware Abstraction Layer and Drivers

• Redundancy

• Secure Network Time Protocol (SNTP)

• Password Recovery

1.2.1.1 Installation Feature

The upgrade/downgrade of the switch can be performed at boot time using one of the following methods:

•Web UI

•DHCP

•CLI

•SNMP

• Patches

The switch has sufficient non-volatile memory to store two firmware images. Having a second firmware

image provides a backup in case of failure of the primary image. It also allows for testing of new firmware

on a switch with the ability to easily revert to a previous image.

1.2.1.2 Licensing Support

The following licensing information is utilized when upgrading the switch

• The maximum numbers of AP licenses a switch can adopt is dependant on the number purchased

1.2.1.3 Configuration Management

The switch supports the redundant storage of configuration files to protect against corruption during a write

operation and ensure (at any given time) a valid configuration file exists. If writingthe configuration file fails,

it is rolled back and a pre-write file is used.

Text Based Configuration

The configuration is stored a in human readable format (as a set of CLI commands).

1.2.1.4 Diagnostics

The following diagnostics are available:

1. In-service Diagnostics – In-service diagnostics provide a range of automatic health monitoring features

ensuring both the system hardware and software are in working order. In-service-diagnostics

continuously monitor available physical characteristics (as detailed below) and issue log messages when

warning or error thresholds are reached. There are three types of in-service diagnostics:

1-6 Motorola RF Switch Systen Reference

• Hardware – Ethernet ports, chip failures, system temperature via the temperature sensors provided

by the hardware, etc.

• Software – CPU load, memory usage, etc.

• Environmental – CPU and air temperature, fans speed, etc.

2. Out-of-service Diagnostics – Out-of-service diagnostics are a set of intrusive tests run from the user

interface. Out-of-service diagnostics cannot be run while the switch is in operation. Intrusive tests

include:

• Ethernet loopback tests

• RAM tests, Real Time Clock tests, etc.

3. Manufacturing Diagnostics – Manufacturing diagnostics are a set of diagnostics used by manufacturing

to inspect quality of hardware.

1.2.1.5 Serviceability

A special set of Service CLI commands are available to provide additional troubleshooting capabilities for

service personnel (access to Linux services, panic logs, etc.). Only authorized users or service personnel are

provided access to the Service CLI.

A built-in Packet Sniffer enables service personnel and users to capture incoming and outgoing packets in a

buffer.

The switch also collects statistics for RF activity, Ethernet port activity etc. RF statistics include roaming

stats, packet counters, octets tx/rx, signal, noise SNR, retry, and information for each MU.

1.2.1.6 Tracing / Logging

Log messages are well-defined and documented system messages with various destinations. They are

numbered and referenced by ID. Each severity level group, can be configured separately to go to either the

serial console, telnet interface, log file or remote syslog server.

Trace messages are more free-form and are used mainly by support personnel for tracking problems. They

are enabled or disabled via CLI commands. Trace messages can go to a log file, the serial console, or the

current tty.

Log and trace messages are interleaved in the same log file, so chronological order is preserved. Log and

trace messages from different processes are similarly interleaved in the same file for the same reason.

Log message format is similar to the format used by syslog messages (RFC 3164). Log messages include

message severity, source (facility), the time the message was generated and a textual message describing

the situation triggering the event. For more information on using the switch logging functionality, see

Configuring System Logging on page 8-7.

1.2.1.7 Process Monitor

The switch Process Monitor checks to ensure processes under its control are up and running. Each monitored

process sends periodic heartbeat messages. A process that is down (due to a software crash or stuck in an

endless loop) is detected when its heartbeat is not received. Such a process is terminated (if still running)

and restarted (if configured) by the Process Monitor.

Overview 1-7

1.2.1.8 Hardware Abstraction Layer and Drivers

The Hardware Abstraction Layer (HAL) provides an abstraction library with an interface hiding hardware/

platform specific data. Drivers include platform specific components such as Ethernet, Flash Memory storage

and thermal sensors.

1.2.1.9 Redundancy

Using the switch redundancy, up to 12 switches can be configured in a redundancy group (and provide group

monitoring). In the event of a switch failure, an existing cluster member assumes control. Therefore, the

switch supported network is always up and running even if a switch fails or is removed for maintenance or

a software upgrade.

The following redundancy features are supported:

• Up to 12 switch redundancy members are supported in a single group. Each member is capable of

tracking statistics for the entire group in addition to their own.

• Each redundancy group is capable of supporting an Active/Active configuration responsible for group

load sharing.

• Members within the same redundancy group can be deployed across different subnets.

• APs are load balanced across members of the group.

• Licenses are aggregated across the group. When a new member joins the group, the new member can

leverage the Access Port adoption license(s) of existing members.

• Each member of the redundancy group (including the reporting switch) is capable of displaying cluster

performance statistics for all members in addition to their own.

• Centralized redundancy group management using the switch CLI.

For more information on configuring the switch for redundancy support, see

Configuring Switch Redundancy & Clustering on page 5-34.

1.2.1.10 Secure Network Time Protocol (SNTP)

Secure Network Time Protocol (SNTP) manages time and/or network clock synchronization within the switch

managed network. SNTP is a client/server implementation. The switch (a SNTP client) periodically

synchronizes its clock with a master clock (an NTP server). For example, the switch resets its clock to

07:04:59 upon reading a time of 07:04:59 from its designated NTP server. Time synchronization is

recommended for the switch’s network operations. The following holds true:

• The switch can be configured to provide NTP services to NTP clients.

• The switch can provide NTP support for user authentication.

• Secure Network Time Protocol (SNTP) clients can be configured to synchronize switch time with an

external NTP server.

For information on configuring the switch to support SNTP, see Configuring Secure NTP on page 5-24.

1.2.1.11 Password Recovery

The switch has a provision allowing it to restore its factory default configuration if your password is lost. In

doing so however the current configuration is erased, but can be restored assuming if has been exported to

an external location. For information on password recovery, see

Switch Password Recovery on page 2-2.

1-8 Motorola RF Switch Systen Reference

1.2.2 Wireless Switching

The switch includes the following wireless switching features:

• Adaptive AP

• Physical Layer Features

• Rate Limiting

• Proxy-ARP

• HotSpot / IP Redirect

• IDM (Identity Driven Management)

• Voice Prioritization

• Self Healing

• Wireless Capacity

• AP and MU Load Balancing

• Wireless Roaming

• Power Save Polling

• QoS

• Wireless Layer 2 Switching

• Automatic Channel Selection

• WMM-Unscheduled APSD

• Multiple VLANs per WLAN

1.2.2.1 Adaptive AP

An adaptive AP (AAP) is an AP-5131 or AP-7131 Access Point adopted by a wireless switch. The management

of an AAP is conducted by the switch, once the Access Point connects to the switch and receives its AAP

configuration.

An AAP provides:

• local 802.11 traffic termination

• local encryption/decryption

• local traffic bridging

• tunneling of centralized traffic to the wireless switch

The connection between the AAP and the switch can be secured using IPSec depending on whether a secure

WAN link from a remote site to the central site already exists.

The switch can be discovered using one of the following mechanisms:

• DHCP

• Switch fully qualified domain name (FQDN)

• Static IP addresses

The benefits of an AAP deployment include:

Overview 1-9

• Centralized Configuration Management & Compliance - Wireless configurations across distributed sites

can be centrally managed by the wireless switch or cluster.

• WAN Survivability - Local WLAN services at a remote sites are unaffected in the case of a WAN outage.

• Securely extend corporate WLAN's to stores for corporate visitors - Small home or office deployments

can utilize the feature set of a corporate WLAN from their remote location.

• Maintain local WLAN's for specific applications - WLANs created and supported locally can be

concurrently supported with your existing infrastructure.

For an overview of AAP and how it is configured and deployed using the switch and Access Point, see

B.1 Adaptive AP Overview.

1.2.2.2 Physical Layer Features

802.11a

• DFS Radar Avoidance – Dynamic Frequency Selection (DFS) is mandatory for WLAN equipment intended

to operate in the frequency bands 5150 MHz to 5350 MHz and 5470 MHz to 5725 MHz when in countries

of the EU.

The purpose of DFS is:

• Detect interference from other systems and avoid co-channeling with those systems (most notably

radar systems).

• Provide uniform spectrum loading across all devices.

This feature is enabled automatically when the country code indicates that DFS is required for at

least one of the frequency bands that are allowed in the country.

• TPC – Transmit Power Control (TPC) meets the regulatory requirement for maximum power and mitigation

for each channel. TPC functionality is enabled automatically for every AP that operates on the channel.

802.11bg

• Dual mode b/g protection – ERP builds on the payload data rates of 1 and 2 Mbit/s that use DSSS

modulation and builds on the payload data rates of 1, 2, 5.5, and 11 Mbit/s, that use DSSS, CCK, and

optional PBCC modulations. ERP provides additional payload data rates of 6, 9, 12, 18, 24, 36, 48, and 54

Mbit/s. The transmission and reception capability for 1, 2, 5.5, 11, 6, 12, and 24 Mbit/s data rates is

mandatory.

Two additional optional ERP-PBCC modulation modes with payload data rates of 22 and 33 Mbit/s are

defined. An ERP-PBCC station may implement 22 Mbit/s alone or 22 and 33 Mbit/s. An optional

modulation mode (known as DSSS-OFDM) is also incorporated with payload data rates of 6, 9, 12, 18,

24, 36, 48, and 54 Mbit/s.

• Short slot protection – The slot time is 20 µs, except an optional 9 µs slot time may be used when the

BSS consists of only ERP STAs capable of supporting this option. The optional 9 µs slot time should not

be used if the network has one or more non-ERP STAs associated. For IBSS, the Short Slot Time field is

set to 0, corresponding to a 20 µs slot time.

1.2.2.3 Rate Limiting

Rate Limiting limits the maximum rate sent to or received from the wireless network per mobile unit. It

prevents any single user from overwhelming the wireless network. It can also provide differential service for

service providers. The uplink and downlink rate limits are usually configured on the radius server using

1-10 Motorola RF Switch Systen Reference

Motorola vendor specific attributes. The switch extracts the rate limits from radius server response. When

such attributes are not present, the global settings on the switch are then applied.

1.2.2.4 Proxy-ARP

Proxy ARP is provided for MU's whose IP address is known. The WLAN generates an ARP reply on behalf of

a MU (if the MU's IP address is known). The ARP reply contains the MAC address of the MU (not the MAC

address of switch). Thus, the MU does not awaken to send ARP replies (increasing MU battery life and

conserving wireless bandwidth).

If an MU goes into PSP without transmitting at least one packet, its Proxy ARP will not work.

1.2.2.5 HotSpot / IP Redirect

A hotspot is a Web page users are forced to visit before they are granted access to the Internet. With the

advent of Wi-Fi enabled client devices (such as laptops and PDAs) commercial hotspots are common and can

be found at many airports, hotels and coffee shops. The hotspot re-directs the user’s traffic on hotspot

enabled WLANs to a web page that requires them to authenticate before granting access to the WLAN. The

following is a typical sequence for hotspot access:

1. A visitor with a laptop requires hotspot access at a site.

2. A user ID/ Password and hotspot ESSID is issued by the site receptionist or IT staff.

3. The user connects their laptop to this ESSID.

4. The laptop receives its IP configuration via DHCP.

5. The user opens a Web browser and connects to their home page.

6. The switch re-directs them to the hotspot Web page for authentication.

7. The user enters their User ID/ Password.

8. A Radius server authenticates the user.

9. Upon successful authentication, the user is directed to a Welcome Page that lists (among other things)

an Acceptable Use Policy.

10.The user agrees to the usage terms and is granted access to the Internet. (or other network services).

To setup a hotspot, create a WLAN ESSID and select Hotspot authentication from the Authentication menu.

This is simply another way to authenticate a WLAN user, as it would be impractical to authenticate visitors

using 802.1x. For information on configuring a hotspot, see Configuring Hotspots on page 4-34.

1.2.2.6 IDM (Identity Driven Management)

Radius authentication is performed for all protocols using a Radius-based authentication scheme (such as

EAP). Identity driven management is provided using a Radius client. The following IDMs are supported:

• User based SSID authentication — Denies authentication to MUs if associated to a ESSID configured

differently by their Radius server.

•User based VLAN assignment — Allows the switch to extract VLAN information from the Radius server.

• User based QoS — Enables QoS for the MU based on settings within the Radius Server.

Page is loading ...

Motorola RFS Series, RFS6000 3.3, RFS7000 1.3, WS5100 3.3 Reference guide

Related papers

Other documents