Page is loading ...
Quick Reference Guide
Mini 4BAR™ 2.0 QRG EN
2
About This
Guide
The Mini 4BAR™ 2.0
Quick Reference Guide (QRG) has basic product
information such as mounting, menu options, and DMX values. Download
the User Manual from www.chauvetlighting.com/product-manuals-literature/
for more details.
Disclaimer
The information and specifications contained in this QRG
are subject to
change without notice.
Safety Notes
These Safety Notes include important information about install
ation, use,
and maintenance.
• This product is not intended for permanent installation.
• Only connect this product to a grounded and protected circuit.
• Always disconnect from power before cleaning or replacing the fuse.
• Do not look at the light source when the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power by pulling on the cord.
• When mounting this product overhead, use a safety cable.
• Do not allow flammable materials close to the unit while operating.
•
Do not touch this product when it is operating because it may be hot.
• The voltage of the outlet to which you are connecting this product must
be within the range stated on the decal or rear panel of the product.
• This product is for indoor use only! (IP20) To prevent risk of fire or
shock, do not expose this product to rain or moisture.
• Always mount this product in a location with adequate ventilation, at
least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the unit’s housing are blocked.
• Never connect this product to a dimmer or rheostat.
• Replace the fuse with another of the same type and rating.
• Only use the hanging/mounting brackets to carry this product.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate
this product at higher temperatures.
• In the event of a serious operating problem, stop using immediately.
• Do not open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods
of non-
use completely disconnect the product from power via breaker or
by unplugging it.
Contact
Outside the U.S., United Kingdom, Ireland, or Mexico,
contact your
distributor to request support or return a product. Visit
www.chauvetlighting.com for contact information.
What is
Included
• Mini 4BAR™ 2.0
• Power Cord
• Carrying Bag
• Hanging Bracket with Mounting
Hardware
• Tripod
• Tripod Carrying Bag
• Footswitch
• Warranty card
•
Quick Reference Guide
Mini 4BAR™ 2.0 QRG EN
3
To Begin
Unpack your Mini 4BAR™ 2.0
and make sure you have received all parts in
good condition. If the box or contents appear damaged, notify the carrier
immediately, not Chauvet.
Description
The Mini 4BAR™ 2.0 is an enhanced, brighter version of the Mini 4BAR™
with redesigned square pods. Options include DMX control, Master/S
lave
mode, sound-active programs and power linking.
Four individually
adjustable heads offer total room or stage coverage.
Easy setup and tear
down with the includ
ed tripod, carrying bags and footswitch. The Mini
4BAR™ 2.0 coordinates with other 4BAR™ fixtures via Master/Slave mode.
Overview
(back)
AC Power
This product has an auto-
ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
For the maximum number of Mini 4BAR™ 2.0 products
that you can power
link at each voltage, see the User Manual or the label on the product.
Fuse
Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the Safety Notes.
Product
Mounting
Diagram
Power In
Sound Sensitivity Knob
Fuse Holder
Power Out
Microphone
DMX In/Out
Pod Pan Adjustment
Pod Tilt Adjustment
Tripod Insertion
Footswitch Input
Display and
Control
Buttons
Mini 4BAR™ 2.0 QRG EN
4
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the
numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
Menu Options
Main Function
Programming Levels
Description
DMX Personalities
3-CH
d 1–d512
Sets DMX personality and starting address
15CH
Sound Active Mode
SND
Sets Sound Active mode
Automatic Mode
AUTO
Sets Auto Program
Auto Program Speed
S--
S 1–S100
Sets Auto Program speed
DMX Linking
The Mini 4BAR™ 2.0
can work with a DMX controller when linked
by DMX serial connections.
Instructions for connecting and configuring
this product for DMX operation are in the User Manual.
If you are
not familiar with DMX, download the DMX Primer
from
www.chauvetlighting.com/download.
Starting
Address
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 498.
Master/Slave
Connection
The Mini 4BAR™ 2.0 uses the DMX data connec
tion for its Master/Slave
mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
Footswitch
Connection
The Mini 4BAR™ 2.0 can also be operated using the footswitch
.
Instructions for connecting and configuring this product using the footswitch
are in the User Manual.
Mini 4BAR™ 2.0 QRG EN
5
DMX Values
15CH
Channel Function Value Percent/Setting
1
Control/Operating
Mode
000 ó 009
RGB color mixing mode
010 ó 029
Auto program 1
030 ó 049
Auto program 2
050 ó 069
Auto program 3
070 ó 089
Auto program 4
090 ó 109
Auto program 5
110 ó 129
Auto program 6
130 ó 149
Auto program 7
150 ó 169
Auto program 8
170 ó 189
Auto program 9
190 ó 209
Auto program 10
210 ó 229
Auto program 11
230 ó 249
Auto program 12
250 ó 255
Sound-Active mode
2
Dimmer
000 ó 255
0–100%
3 Strobe
000 ó 009
No function
010 ó 255
Slow to fast
4
Red 1
000 ó 255
0–100%
RGB color mixing
(Pod 1)
5
Green 1
000 ó 255
0–100%
6
Blue 1
000 ó 255
0–100%
7
Red 2
000 ó 255
0–100%
RGB color mixing
(Pod 2)
8
Green 2
000 ó 255
0–100%
9
Blue 2
000 ó 255
0–100%
10
Red 3
000 ó 255
0–100%
RGB color mixing
(Pod 3)
11
Green 3
000 ó 255
0–100%
12
Blue 3
000 ó 255
0–100%
13
Red 4
000 ó 255
0–100%
RGB color mixing
(Pod 4)
14
Green 4
000 ó 255
0–100%
15
Blue 4
000 ó 255
0–100%
Mini 4BAR™ 2.0 Pods for DMX Control
3-CH
Channel
Function Value Percent/Setting
1
Red
000 ó 255
0–100%
2
Green
000
ó
255
0–100%
3
Blue
000
ó
255
0–100%
1
2
3
4
Mini 4BAR™ 2.0 QRG Multi-Language
40
Значения DMX (прод.)
3-CH
Канал Функция Значение
Процент/уставка
1
Красный
000 ó 255
0–100%
2
Зеленый
000 ó 255
0–100%
3
Синий
000 ó 255
0–100%
Приставками Mini 4BAR™ 2.0 для управления DMX
Contact
Us
WORLD HEADQUARTERS - Chauvet
General Information
Address: 5200 NW 108
th
Avenue
Sunrise, FL 33351
Voice: (954) 577-4455
Fax: (954) 929-5560
Toll free: (800) 762-1084
Technical Support
Voice: (954) 577-4455 (Press 4)
Fax: (954) 756-8015
Email: tech@chauvetlighting.com
World Wide Web
www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Fax: +44 (0)1773 511110
Technical Support
Email: uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
MEXICO - Chauvet Mexico
General Information
Address: Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: +52 (728) 285-5000
Technical Support
Email: servicio@chauvet.com.mx
World Wide Web
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, or Mexico,
contact your dealer. Follow
their instructions to request support or to return a product. Visit our website for
contact details.
Mini 4BAR™ 2.0 QRG – Rev. 8 ML
© Copyright 2014 Chauvet
All rights reserved.
Printed in the P. R. C.
1 2
3
4
/