Aaeon IMBA-H110A is an ATX form factor industrial motherboard that supports Intel's 7th/6th generation Core i7/i5/i3 processors. It features dual-channel DDR4 memory with a maximum capacity of 32GB, providing fast and efficient data processing. With onboard graphics, VGA, HDMI, and DP ports, it offers flexible display options for various applications. It has extensive expansion capabilities with PCIe slots, PCI slots, and an M.2 slot, enabling you to customize the system for your specific needs.
Aaeon IMBA-H110A is an ATX form factor industrial motherboard that supports Intel's 7th/6th generation Core i7/i5/i3 processors. It features dual-channel DDR4 memory with a maximum capacity of 32GB, providing fast and efficient data processing. With onboard graphics, VGA, HDMI, and DP ports, it offers flexible display options for various applications. It has extensive expansion capabilities with PCIe slots, PCI slots, and an M.2 slot, enabling you to customize the system for your specific needs.
Industrial Motherboard
IMBA-H110A
ii
E16399
Revised Edition
February 2020
Copyright Notice
This document is copyrighted, 2020. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described
in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use,
or for any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to
change without notice. While reasonable efforts have been made in the preparation
of this document to assure its accuracy, the original manufacturer assumes no
liabilities resulting from errors or omissions in this document, or from the use of the
information contained herein.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
Acknowledgments
All other products’ name or trademarks are properties of their respective owners.
• AMI is a trademark of American Megatrends Inc.
• Intel
®
, Core™ are trademarks of Intel
®
Corporation.
• Microsoft Windows
®
is a registered trademark of Microsoft Corp.
• IBM, PC/AT, PS/2, and VGA are trademarks of International Business
Machines Corporation.
The original manufacturer reserves the right to make changes in the product
design without notice to its users.
All other product names or trademarks are properties of their respective owners.
iii
Contents
Chapter 1 Product overview
1.1 Package contents ......................................................................... 1-1
1.2 Features ........................................................................................ 1-1
1.3 Specications ............................................................................... 1-2
Chapter 2 Motherboard information
2.1 Before you proceed ..................................................................... 2-1
2.2 Motherboard layout ...................................................................... 2-2
2.3 Screw size ..................................................................................... 2-4
2.3.1 Component side .............................................................. 2-4
2.3.2 Solder side ...................................................................... 2-5
2.4 Central Processing Unit (CPU) ................................................... 2-6
2.4.1 Installing the CPU ........................................................... 2-7
2.4.2 CPU heatsink and fan assembly installation ................... 2-9
2.5 System memory ......................................................................... 2-10
2.6 Jumpers ...................................................................................... 2-12
2.7 Connectors ................................................................................. 2-15
2.7.1 Rear panel connectors .................................................. 2-15
2.7.2 Internal connectors ....................................................... 2-17
Chapter 3 BIOS setup
3.1 BIOS setup .................................................................................... 3-1
3.2 Main menu .................................................................................... 3-2
3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2
3.2.2 System Time [HH:MM:SS] .............................................. 3-2
3.3 Advanced menu ........................................................................... 3-2
3.3.1 CPUConguration .......................................................... 3-3
3.3.2 Trusted Computing ......................................................... 3-3
3.3.3 SATAConguration ........................................................ 3-4
3.3.4 PCH-FWConguration ................................................... 3-5
3.3.5 SIOConguration ........................................................... 3-5
3.3.6 NCT6791D HW Monitor .................................................. 3-6
3.3.7 USBConguration .......................................................... 3-9
3.3.8 DigitalIOPortConguration ........................................... 3-9
3.3.9 Power Management ........................................................ 3-9
iv
3.4 Chipset menu ............................................................................. 3-10
3.4.1 SystemAgent(SA)Conguration ................................. 3-10
3.4.2 PCH-IOConguration ................................................... 3-11
3.5 Security menu ............................................................................ 3-11
3.5.1 Administrator Password ................................................ 3-11
3.5.2 User Password .............................................................. 3-12
3.6 Boot menu .................................................................................. 3-12
3.6.1 BootConguration ........................................................ 3-12
3.6.2 Boot Option Priorities .................................................... 3-13
3.7 Save & Exit menu ....................................................................... 3-13
Appendix
Notices .......................................................................................................A-1
1-1
Chapter 1: General information
1.1 Package contents
Check your industrial motherboard package for the following items.
1 x Industrial Motherboard
1 x SATA 6.0Gb/s cable
1 x COM cable
1 x I/O Shield
1 x Support CD
If any of the above items is damaged or missing, contact your distributor or
sales representative immediately.
1.2 Features
• Intel
®
7th/ 6th Generation Core™ i7/ i5/ i3, Pentium
®
and Celeron
®
14nm
LGA1151 socket processor
• 2 x DIMMs, max. 32GB, DDR4 2400 / 2133/ 1867 MHz, non-ECC,
un-buffered memory
• 3 x SATA III 6.0 Gb/s, 4x USB 3.0, 6 x USB 2.0
• Realtek
®
ALC8876-ChannelHighDenitionAudioCODEC
• Multi Display: VGA+HDMI, VGA+DP, HDMI+DP
• Dual Ethernet LAN: 1 x Intel
®
PHY i219V Giga LAN, 1 x Intel
®
i211AT Giga
LAN, RJ45 x 2
• 1 x PCIe 3.0/2.0 [x16] slot, 1 x PCIe 2.0 [x4] slot, 4 x PCI slots
• 1 x M.2 M key (22 x 80mm) slot for SATA
Chapter 1
Product overview
IMBA-H110A
1-2
1.3 Specications
(continued on the next page)
SYSTEM
CPU
Intel
®
7th/ 6th Generation (Kaby Lake-S/ Skylake-S) Core™ i7/ i5/ i3,
Pentium
®
and Celeron
®
14nm LGA1151 socket processor
Chipset
Intel
®
H110 Express Chipset
Memory
2 x DIMMs, max. 32 GB, DDR4 2400*/ 2133/ 1867 MHz, non-ECC,
un-buffered memory
Dual channel memory architecture
*2400 MHz can only be reached when a Kaby Lake processor is used.
I/O Chipset
NCT6791D + F81216HD
Ethernet
1 x Intel
®
PHY i219V Giga LAN
1 x Intel
®
i211AT Giga LAN, RJ45 x 2
Audio
Realtek
®
ALC8876-ChannelHighDenitionAudioCODEC
(Colay/ALC886)
TPM
Nuvoton NPCT650ABBYX TPM2.0 onboard (optional)
Expansion slots
1 x PCIe 3.0/2.0 [x16] slot
1 x PCIe 2.0 [x4] slot (open edge)
4 x PCI slots
1 x M.2 M-key (22 x 80mm) slot for SATA
BIOS
1 x 128Mbit Flash ROM, AMI BIOS
Added Buffer IC
H/W Status Monitor
Monitors CPU/chasiss temperature
Monitors Vcore/5V/3.3V/12V/3VSB/VBAT voltages
Monitors CPU/chassis fan speed
Watchdog Timer
1~255 steps by software program
Smart Fan Control
CPU Fan / Chassis Fan x 2
Wake On LAN / PXE
Yes ( WOL, PXE)
Power States
S3, S4, S5
Graphics
Graphics Chipset
Intel
®
HD Graphics
VGA support via RTD2168
Graphics Multi Display
VGA+HDMI, VGA+DP, HDMI+DP
Resolution
VGA: Up to 1920 x 1200 @60Hz (via RTD2168)
HDMI1.4: Up to 4096 x 2304 @24Hz
DP1.2: Up to 4096 x 2304 @60Hz
Environment, Power, and ME
Battery
Lithium battery
Power requirement
1 x 24-pin ATX connector
1 x 8-pin (2x4) ATX 12V power connector
Operating temperature
32
o
F~140
o
F (0
o
C~60
o
C)
Storage temperature
-40
o
F~185
o
F (-40
o
C~85
o
C)
Operating humidity
0%~90% relative humidity, non-condensing
Certicate
CE & FCC class A
Form factor
ATX form factor: 12 in. x 9.6 in. (305 mm x 244 mm)
Weight
1.76 lb (0.8 Kg)
1-3
Chapter 1: General information
Back I/O
USB
4 x USB 3.0 ports
2 x USB 2.0 ports
Display
1 x HDMI ports
1 x VGA port
1 x Disaplay port
Serial port
1 x RS-232/422/485 COM port (COM1, supports 5V/12V/RI, optional)
PS/2 port
1 x PS/2 stack port (keyboard & mouse)
LAN
2 x LAN (RJ-45) ports
Audio
3 x Audio jacks: Line-in, Mic-in, Line-out
Internal I/O
Storage
3 x SATA III 6.0Gb/s ports
1 x M.2 M-Key slot (22 x 80mm)
USB
2 x USB 2.0 connectors support additional 4 USB ports
Audio
1 x AMP speaker header (Line-out)
Serial port
5 x RS-232 headers
DIO
1 x 8-bit Digital I/O interface (In/Out programmable)
Fan
1 x CPU Fan connector (4-pin)
2 x Chassis Fan connectors (4-pin)
Power
1 x 24-pin EATX Power header
1 x 8-pin EATX 12V Power connector
Others
1 x Chassis Intrusion
1 x AT/ATX mode select jumper
1 x Front panel header
1 x Clear CMOS jumper
Others
OS support
Windows
®
10 64-bit
Windows
®
8.1 64-bit (not supported when using a Kaby Lake processor)
Windows
®
7 32-bit / 64-bit (not supported when using a Kaby Lake
processor)
Linux Fedora 64bit
Accessories
1 x SATA 6.0Gb/s cable
1 x COM cable
1 x I/O shield
1 x Support DVD
NOTE: Specicationsaresubjecttochangewithoutnotice.
IMBA-H110A
1-4
2-1
Chapter 2: Motherboard information
Chapter 2
Motherboard information
2.1 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
CAUTION!
• Unplugthepowercordfromthewallsocketbeforetouchingany
component.
• Beforehandlingcomponents,useagroundedwriststraportouchasafely
grounded object or a metal object, such as the power supply case, to avoid
damaging them due to static electricity.
• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.
• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic
pad or in the bag that came with the component.
• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower
supply is switched off or the power cord is detached from the power
supply. Failure to do so may cause severe damage to the motherboard,
peripherals, or components.
IMBA-H110A
2-2
IMBA-H110A
PCIEX16_1
M2_TYPE_M1
2280
PCIEX4
PCI1
PCI2
PCI3
PCI4
F_PANEL1
CLRTC1
AT_ATX
CHASSIS
USB910 USB78
EATX_PWR1
CPU_FAN1
CHA_FAN1
CHA_FAN2
BATTERY1
Super
I/O
Super
I/O
ASM
1085
ALC
887
COM1_V1
J3
J1
J2
COM1
VGA
J4
ASM
1442K
RTD
2168
LGA1151
Intel
®
H110
Intel
®
PHY i219V
Intel
®
i211AT
DDR4 DIMM_A1 (64bit, 288-pin module)
DDR4 DIMM_B1 (64bit, 288-pin module)
SATA6G_2
SPI_1
SATA6G_1
SATA6G_3
BUZZER1
AUDIO1
KBMS
24.4cm(9.6in)
128Mb
BIOS
EATX_PWR2
HDMI
_DP1
USB56
30.5cm(12.0in)
COM3COM4
COM2
COM5COM6
DIO
AMP_CON
LAN2_USB3_34
LAN1_USB3_12
5 42 431 6
7
2
15
8
10
11
9
12134141617
7
2.2 Motherboard layout
Place this side
towards the rear
of the chassis
NOTE: Place nine screws into the holes indicated by circles to secure the
motherboard to the chassis.
CAUTION! Do not overtighten the screws! Doing so can damage the
motherboard.
2-3
Chapter 2: Motherboard information
Connectors/Jumpers/Slots
Page
1.
COM1 operating mode selection jumpers (2-pin J1/J2/J3/J4) 2-13
2.
ATX power connectors (24-pin EATXPWR1, 8-pin EATX_PWR2) 2-17
3.
COM1 Ring/+5V/+12V selection jumper (6-pin COM1_V1) 2-13
4.
CPU and chassis fan connectors (4-pin CPU_FAN1, 4-pin CHA_FAN1/2) 2-18
5.
Intel
®
LGA1151 CPU socket 2-6
6.
DDR4 DIMM slots 2-10
7.
Serial port connectors (10-1pin COM2~6) 2-21
8.
BIOS programmable connector (8-pin SPI_1) 2-19
9.
M.2 M-Key slot 2-22
10.
Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~3) 2-18
11.
System panel connector (10-1 pin F_PANEL) 2-20
12.
AT/ATX mode selection (3-pin AT_ATX) 2-14
13.
Chassis intrusion jumper (4-1 pin CHASSIS) 2-14
14.
Clear RTC RAM (3-pin CLRTC1) 2-12
15.
USB 2.0 connectors (10-1 pin USB78 and USB910) 2-19
16. Digital I/O connector (10-pin DIO) 2-22
17. Speaker out connector (4-pin AMP_CON) 2-17
IMBA-H110A
2-4
2.3 Screw size
2.3.1 Component side
304.80
243.84
11.32
24.35
53.62
73.38
83.25
73.41
76.07
81.41
84.07
82.30
106.42
127.92
150.12
140.97
161.01
201.65
219.41
239.73
260.05
280.37
10.12
300.23
300.10
5.72
83.03
27.05
19.64
48.13
69.22
90.30
148.96
193.42
199.39
230.78
253.60
255.06
262.09
260.64
280.64
299.97
297.56
300.10
300.15
299.97
0.00
7.36
11.84
14.63
21.99
16.68
5.85
38.77
10.49
7.06
68.15
49.40
126.81
146.81
179.94
199.24
240.28
232.96
73.66
33.56
46.74
41.28
45.45
163.20
78.49
133.35
154.31
177.17
200.41
193.80
210.42
227.44
210.31
212.85
203.45
225.43
218.33
0.00
10.03
27.85
47.42
78.92
109.92
131.42
150.12
304.80
0.00
35.52
125.85
163.85
270.64
2-5
Chapter 2: Motherboard information
2.3.2 Solder side
304.80
243.84
6.35
6.35
163.83
288.29
46.14
121.15
46.14
121.15
163.83
288.29
57.22
118.24
33.02
165.10
89.31
108.81
126.81
144.81
164.31
10.16
165.10
237.49
237.49
0.00
0.00
IMBA-H110A
2-6
2.4 Central Processing Unit (CPU)
This motherboard comes with an Intel
®
7th/ 6th Generation Core™ i7 / i5 / i3,
Pentium
®
and Celeron
®
14nm LGA 1151 socket processor.
IMPORTANT: Unplug all power cables before installing the CPU.
CAUTION!
• Uponpurchaseofthemotherboard,ensurethatthePnPcapison
the socket and the socket contacts are not bent. Contact your retailer
immediately if the PnP cap is missing, or if you see any damage to the PnP
cap/socket contacts/motherboard components.
• Keepthecapafterinstallingthemotherboard.Themanufacturerwill
process Return Merchandise Authorization (RMA) requests only if the
motherboard comes with the cap on the LGA1151 socket.
• Theproductwarrantydoesnotcoverdamagetothesocketcontacts
resulting from incorrect CPU installation/removal, or misplacement/loss/
incorrect removal of the PnP cap.
IMBA-H110A
IMBA-H110A CPU socket LGA1151
2-7
Chapter 2: Motherboard information
2.4.1 Installing the CPU
1
A
B
2 3
CAUTION! Ensure that you install the correct CPU designed for LGA1151 only.
DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the
LGA1151 socket.
IMBA-H110A
2-8
A
B
C
4
5
2-9
Chapter 2: Motherboard information
2.4.2 CPU heatsink and fan assembly installation
CAUTION! Apply the Thermal
Interface Material to the CPU
heatsink and CPU before you
install the heatsink and fan if
necessary.
To install the CPU heatsink and fan assembly
B
A
A
B
1
2
3 4
IMBA-H110A
2-10
2.5 System memory
This motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory
Modules(DIMM)sockets.ThegureillustratesthelocationoftheDDR4DIMM
sockets:
To uninstall the CPU heatsink and fan assembly
A
B
B
A
2
1
IMBA-H110A
IMBA-H110A 288-pin DDR4 DIMM sockets
DIMM_A1
DIMM_B1
2-11
Chapter 2: Motherboard information
Installing a DIMM
To remove a DIMM
A
B
1
2
3
IMBA-H110A
2-12
2.6 Jumpers
1. Clear RTC RAM (3-pin CLRTC1)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS.
You can clear the CMOS memory of system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM
data in CMOS, which include system setup information such as system
passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on
pins 2-3 for about 5~10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup
to reenter data.
CAUTION! Except when clearing the RTC RAM, never remove the cap on
CLRTC jumper default position. Removing the cap will cause system boot
failure!
NOTES:
• Ifthestepsabovedonothelp,removetheonboardbatteryandmovethe
jumper again to clear the CMOS RTC RAM data. After clearing the CMOS,
reinstall the battery.
• YoudonotneedtocleartheRTCwhenthesystemhangsdueto
overclocking. For system failure due to overclocking, use the CPU
Parameter Recall (C.P.R) feature. Shut down and reboot the system so the
BIOS can automatically reset parameter settings to default values.
IMBA-H110A
IMBA-H110A Clear RTC RAM
21 2 3
Normal
(Default)
Clear RTC
CLRTC1
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
Aaeon IMBA-H110A is an ATX form factor industrial motherboard that supports Intel's 7th/6th generation Core i7/i5/i3 processors. It features dual-channel DDR4 memory with a maximum capacity of 32GB, providing fast and efficient data processing. With onboard graphics, VGA, HDMI, and DP ports, it offers flexible display options for various applications. It has extensive expansion capabilities with PCIe slots, PCI slots, and an M.2 slot, enabling you to customize the system for your specific needs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Wincor Nixdorf Motherboard R1-R2 User manual
-
IEI Integration IMBA-9454 User manual
-
BCM BC67Q Quick Start Card
-
-
ECS H11H4-I User manual
-
Viglen Vig760S User manual
-
-
-
Diebold Nixdorf BEETLE /M-III - Mx Operating instructions
-
Hyundai H610A Pro User manual