CyberData 011404 Operations Guide

SIP Loudspeaker Amplifier

(AC-Powered)



Operations Guide



Part #011404

Document Part #931240J

for Firmware Version 11.6.4

CyberData Corporation

3 Justin Court

Monterey, CA 93940

(831) 373-2601

The IP Endpoint Company

Operations Guide 931240J CyberData Corporation

Operations Guide 931240J

Part # 011404

COPYRIGHT NOTICE:

This manual and related materials are the copyrighted property of CyberData Corporation. No part

o

f this manual or related materials may be reproduced or transmitted, in any form or by any means

(except for internal use by licensed customers), without prior express written permission of

CyberData Corporation. This manual, and the products, software, firmware, and/or hardware

described in this manual are the property of CyberData Corporation, provided under the terms of an

agreement between CyberData Corporation and recipient of this manual, and their use is subject to

that agreement and its terms.

DISCLAIMER: Except as expressly and specifically stated in a written agreement executed by

CyberData

Corporation, CyberData Corporation makes no representation or warranty, express or

implied, including any warranty or merchantability or fitness for any purpose, with respect to this

manual or the products, software, firmware, and/or hardware described herein, and CyberData

Corporation assumes no liability for damages or claims resulting from any use of this manual or such

products, software, firmware, and/or hardware. CyberData Corporation reserves the right to make

changes, without notice, to this manual and to any such product, software, firmware, and/or

hardware.

OPEN SOURCE STATEMENT: Certain software componen

ts included in CyberData products are

subject to the GNU General Public License (GPL) and Lesser GNU General Public License (LGPL)

“open source” or “free software” licenses. Some of this Open Source Software may be owned by

third parties. Open Source Software is not subject to the terms and conditions of the CyberData

COPYRIGHT NOTICE or software licenses. Your right to copy, modify, and distribute any Open

Source Software is determined by the terms of the GPL, LGPL, or third party, according to who

licenses that software.

Software or firmware developed by CyberData that is unrelated to Open Source Software is

cop

yrighted by CyberData, subject to the terms of CyberData licenses, and may not be copied,

modified, reverse-engineered, or otherwise altered without explicit written permission from

CyberData Corporation.

TRADEMARK NOTICE: CyberData Corporation and the CyberData Corporation logos are

t

rademarks of CyberData Corporation. Other product names, trademarks, and service marks may

be the trademarks or registered trademarks of their respective owners.

Technical Support 



The fastest way to get technical support for your VoIP product is to

submit a VoIP Technical Support form at the following website:

http://support.cyberdata.net/



Phone: (831) 373-2601, Ext. 333

Email: [email protected]et

Fax: (831) 373-4193

Company and product information is at www.cyberdata.net.

The IP Endpoint Company

Operations Guide 931240J CyberData Corporation

Revision Information

Revision 931240J, which corresponds to firmware version 11.6.4, was released on September 7,

2018, and has the following changes

• Updates Ta ble 1-1, "Specifications"

• Updates Figure 1-2, "Typical Installation"

• Updates Section 1.4, "Supported Protocols"

• Adds Section 1.7.1, "Intelligibility Outdoor Field Test"

• Updates Ta ble 2-2, "Parts List"

• Updates Ta ble 2-14, "Time Zone String Examples"

• Adds Section 2.2.3, "Assembling the Cable Gland"

• Adds Section 2.2.4, "Installing the SIP Loudspeaker Amplifier (AC-Powered)"

• Adds Section 2.2.5, "Installing the Universal Receptacle"

• Adds Section 2.2.6, "Connecting the Power Cord and Ground Wires"

• Adds Section 2.2.7, "Connecting the Ground Wire"

• Adds Section 2.2.8, "Connecting the Speaker Wires"

• Adds Section 2.2.9, "Terminating the Network Cable Connector"

• Updates Section 2.2.14, "Connecting the Optional 011288 Auxiliary RGB Strobe"

• Updates Figure 2-5, "SIP Loudspeaker Amplifier (AC-Powered) Components"

• Updates Figure 2-6, "Loudspeaker Amplifier Components—AC powered"

• Updates Figure 2-15, "Using the Amplified Outputs—High Power Mode with One Speaker"

• Updates Figure 2-16, "Using the Amplified Outputs—High Power Mode with Two Speakers"

• Updates Section 2.4.1, "Downloading the Firmware"

• Updates Ta ble A-1, "Parts List"

• Updates Section C.1, "Frequently Asked Questions (FAQ)"

• Updates Section C.2, "Documentation"

Browsers Supported

The following browsers have been tested against firmware version 6.5.0:

• Internet Explorer (version: 10)

• Firefox (also called Mozilla Firefox) (version: 23.0.1 and 25.0)

• Chrome (version: 29.0.1547.66 m)

• Safari (version: 5.1.7)

Operations Guide 931240J CyberData Corporation

Pictorial Alert Icons

GENERAL ALERT

General Alert

This pictorial alert indicates a potentially hazardous situation. This alert will be

followed by a hazar

d level heading and more specific information about the

hazard.

Ground

This pictorial alert indicates the Earth grounding connection point.

Hazard Levels

Danger: Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. This is limited to the most extreme situations.

Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or

ser

ious injury.

Caution: Indicates a potentially hazardous situation which, if not a

voided, could result in minor or

moderate injury. It may also alert users against unsafe practices.

Notice: Indicates a statement of company policy (tha

t is, a safety policy or protection of property).

• The safety guidelines for the equipment in this manual do not purport to address all the safety

issues of the eq

uipment. It is the responsibility of the user to establish appropriate safety,

ergonomic, and health practices and determine the applicability of regulatory limitations prior to

use. Potential safety hazards are identified in this manual through the use of words Danger,

Warning, and Caution, the specific hazard type, and pictorial alert icons.

Operations Guide 931240J CyberData Corporation

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(includin

g amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

tw

o blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles

, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

b

een damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

13. Prior to installation, consult local building and electrical code requirements.

14. WARNING: The SIP Loudspeaker Amplifier (AC-P

owered) enclosure is not rated for any

AC voltages!

GENERAL ALERT

Warning

Electrical Hazard: This product should be installed by a licensed electrician

according to all local electrical and building codes.

GENERAL ALERT

Warning

Electrical Hazard: To prevent injury, this apparatus must be securely attached to

the floor/wall in accordance with the installation instructions.

GENERAL ALERT

Warning

The PoE connector is intended for intra-building connections only and does not

route to the outside plant.

Abbreviation or Term Definition

A-law A standard companding algorithm, used in European digital

communications systems to optimize, i.e., modify, the dynamic range of an

analog signal for digitizing.

AVP Audio Video Profile

Cat 5 TIA/EIA-568-B Ca

tegory 5

DHCP Dynamic Host Configuration Protocol

LAN Local Area Network

LED Light Emitting Diode

Mbps Megabits per Second.

NTP Network Time Protocol

PBX Private Branch Exchange

PoE Power over Ethernet (as per IEEE 802.3af standard)

RTFM Reset Test Function Management

SIP Session Initiated Protocol

u-law A companding algorithm, primarily used in the digital telecommunication

UC Unified Communications

VoIP Voice over Internet Protocol

Operations Guide 931240J CyberData Corporation

Abbreviations and Terms

i

Operations Guide 931240J CyberData Corporation

Contents

Chapter 1 Product Overview 1

1.1 How to Identify This Product .....................................................................................................1

1.2 Typical System Installation .......................................................................................................2

1.3 Product Features ......................................................................................................................3

1.4 Supported Protocols .................................................................................................................4

1.5 Supported SIP Servers .............................................................................................................4

1.6 Specifications ...........................................................................................................................5

1.7 Typical Coverage ......................................................................................................................6

1.7.1 Intelligibility Outdoor Field Test .......................................................................................6

1.7.2 Typical Warehouse Paging Setup ...................................................................................7

1.8 Compliance ..............................................................................................................................8

1.8.1 CE Testing ......................................................................................................................8

1.8.2 FCC Statement ..............................................................................................................8

2.1 Parts List ..................................................................................................................................9

Chapter 2 Installing the SIP Loudspeaker Amplifier (AC-Powered) 9

2.2 SIP Loudspeaker Amplifier (AC-Powered) Setup ...................................................................11

2.2.1 SIP Loudspeaker Amplifier (AC-Powered) Components ..............................................12

2.2.2 Loudspeaker Amplifier NEMA Box Components ..........................................................13

2.2.3 Assembling the Cable Gland ........................................................................................14

2.2.4 Installing the SIP Loudspeaker Amplifier (AC-Powered) ..............................................15

2.2.5 Installing the Universal Receptacle ..............................................................................16

2.2.6 Connecting the Power Cord and Ground Wires ...........................................................17

2.2.7 Connecting the Ground Wire ........................................................................................18

2.2.8 Connecting the Speaker Wires .....................................................................................19

2.2.9 Terminating the Network Cable Connector ...................................................................20

2.2.10 Connecting the SIP Loudspeaker Amplifier (AC-Powered) to the Power Injector ......21

2.2.11 Connecting the SIP Loudspeaker Amplifier (AC-Powered) .......................................22

2.2.12 SIP Loudspeaker Amplifier (AC-Powered) System Installation and Connection Options

24

2.2.13 Strobe Connections Behind the Port Cover ...............................................................26

2.2.14 Connecting the Optional 011288 Auxiliary RGB Strobe .............................................27

2.2.15 SIP Loudspeaker Amplifier (AC-Powered) Jumpers ...................................................28

2.2.16 Ethernet Connection ..................................................................................................28

2.2.17 Loudspeaker Type ......................................................................................................29

2.2.18 Cabling/Wiring ............................................................................................................29

2.2.19 Intelligibility Outdoor Field Test ...................................................................................30

2.2.20 Confirm Operation ......................................................................................................31

2.2.21 Confirm the IP Address and Test the Audio ...............................................................32

2.2.22 Adjust the Volume ......................................................................................................33

2.3.1 Factory Default Settings ...............................................................................................36

2.3.2 SIP Loudspeaker Amplifier (AC-Powered) Web Page Navigation ................................37

2.3.3 Using the Toggle Help Button .......................................................................................38

2.3.4 Log in to the Home Page ..............................................................................................40

2.3.5 Configure the Device ....................................................................................................44

2.3.6 Configure the Network Parameters .............................................................................51

2.3.7 Configure the SIP (Session Initiation Protocol) Parameters .........................................54

2.3.8 Configure the Multicast Parameters .............................................................................63

2.3.9 Configure the Sensor Page Parameters .......................................................................67

2.3.10 Configure the Audiofiles Page Parameters .................................................................71

2.3.11 Configure the Events Parameters ..............................................................................78

2.3.12 Configure the Autoprovisioning Parameters ...............................................................84

2.4.1 Downloading the Firmware ...........................................................................................96

2.4.2 Reboot the Device ........................................................................................................98

2.5.1 Command Interface Post Commands ..........................................................................99

Appendix A Mounting the Amplifier 103

A.1 Mount the Amplifier .............................................................................................................103

Operations Guide 931240J CyberData Corporation

ii

Appendix B Setting up a TFTP Server 106

B.1 Set up a TFTP Server ..........................................................................................................106

B.1.1 In a LINUX Environment ............................................................................................106

B.1.2 In a Windows Environment .......................................................................................106

Appendix C Troubleshooting/Technical Support 107

C.1 Frequently Asked Questions (FAQ) ......................................................................................107

C.2 Documentation .....................................................................................................................107

C.3 Contact Information ..............................................................................................................108

C.4 Warranty and RMA Information ............................................................................................108

Index 109

1

Operations Guide 931240J CyberData Corporation

1 Product Overview

1.1 How to Identify This Product

To identify the SIP Loudspeaker Amplifier (AC-Powered), look for a model number label similar to the

one shown in

Figure 1-1. Confirm the following:

• The model number on the label should be 011404.

Figure 1-1. Model Number Label

1

1. This figure is just an example. The revision and version information in this figure may be different than the label

on your product.

SIP Loudspeaker Amplifier

011404B / 021111L

www.cyberdata.net

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

CAN ICES-3 (A)/NMB-3(A)

V

00:20:F7:03:83:CA

404000001

Serial number begins with 404

11.6.4

Model number

Product Overview

Typical System Installation

Operations Guide 931240J CyberData Corporation

2

1.2 Typical System Installation

Figure 1-2 illustrates how the SIP Loudspeaker Amplifier (AC-Powered) is normally installed as part

of a public address system.

Figure 1-2. Typical Installation

Compliant Non-PoE Ethernet Switch

VoIP Phone

SIP Server

Loudspeaker Amplifier

High Power PoE Injector in Box

Optional 011471

IP66 Analog Horn

(sold separately)

Product Overview

Product Features

Operations Guide 931240J CyberData Corporation

3

1.3 Product Features

• SIP Enhanced interoperability for hosted environments

• CyberData has maintained one of the most comprehensive list of IP PBX servers certified to

work with CyberData

• Support for security code access for SIP paging

• Autoprovisioning via HTTPS

• HTTPS web based configuration

• Support for G.711 a-law, G.711u-law, G.722, and G.729 codecs

• 802.11q VLAN tagging

• Configurable sense input for use with fault detection

• Configurable event generation for device health and status monitoring

• Optional direct connect RGB strobe kit connection

• 9 user-uploadable page messages

• Receives pages directly from Polycom phones

• Packaged in a UL 94-HB flame resistant, IK 08 Impact-rated, IP66 enclosure

• Dual-speed ethernet 10/100 Mbps

• PoE 802.3at-enabled

• Line-in for background music

• Line-out connector

• DTMF controlled relay

• Direct 8 Ohm speaker drive

• User-uploadable tones and messages

• Digital and manual volume control

• Second SIP endpoint "Night Ringer"

• Auto-call voice message from input port sense

• Can support one or two analog horns (#011471 IP66 Analog Horn sold separately)

• HTTP Command Interface

• 10 channel prioritized Multicast ports

• Built-in diagnostics

• Delayed page support

• Cisco SRST

Product Overview

Supported Protocols

Operations Guide 931240J CyberData Corporation

4

1.4 Supported Protocols

The SIP Loudspeaker Amplifier (AC-Powered) supports:

•SIP

• Multicast

• HTTP and HTTPS web-based configuration

Provides an intuitive user interface for easy system configuration and verification of SIP

Loudspeaker Amplifier (AC-Powered) operations.

• DHCP Client

Dynamically assigns IP addresses in addition to the option to use static addressing.

• TFTP Client

Facilitates hosting for the configuration file for Autoprovisioning.

•RTP

• RTP/AVP - Audio Video Profile

• SPEEX

• Audio Encodings

PCMU (G.711 mu-law)

PCMA (G.711 A-law)

G.722

G.729

Packet Time 20 ms

1.5 Supported SIP Servers

The following link contains information on how to configure the SIP Loudspeaker Amplifier (AC-

Powered) for the supported SIP servers:

https://www.cyberdata.net/pages/connecting-to-ip-pbx-servers

Product Overview

Specifications

Operations Guide 931240J CyberData Corporation

5

1.6 Specifications

Table 1-1. Specifications

Specifications

Ethernet I/F 10/100 Mbps

Protocol SIP RFC 3261 Compatible

Power Input PoE 802.3at

Audio Output 802.3at: 117.9 (+/- 0.2) dBC @1M and 1kHz

a

Line In:

Input Signal Amplitudes

Input Impedance

2.0 VPP maximum

10k Ohm

Line Out:

Output Signal Amplitudes

Output Level

Total Harmonic Distortion

Output Impedance

2.0 VPP maximum

+2dBm nominal

0.5% maximum

10k Ohm

Operating Range Temperature: -40

o

C to 55

o

C (-40

o

F to 131

o

F)

Humidity: 5-95%, non-condensing

Enclosure UL 94-HB flame resistant, IK 08 Impact-rated, IP66 enclosure

Storage Temperature

Storage Altitude

-40

o

C to 70

o

C (-40

o

F to 158

o

F)

Up to 15,000 ft. (4573 m)

Payload Types G.711 a-law, G.711u-law, G.722, and G.729 codecs

Dimensions

b

10 in. [254 mm] Length

4 in. [101.6 mm] Width

14 in. [355.6 mm] Height

Weight 3.6 lbs. [1.63 kg]

Compliance CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive –

EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada;

ICES-3 Class A, IEEE 802.3 Compliant

Part Number 011404

Horn Part Number 011471

a.When used with the optional 011471 IP66 Analog Horn (sold separately).

b. Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

Product Overview

Typical Coverage

Operations Guide 931240J CyberData Corporation

6

1.7 Typical Coverage

With one horn attached to Paging Amplifier under standard 802.3af PoE power, coverage is up to

5,000 square feet. With two horns attached to the Paging Amplifier under 802.3at PoE (high power),

coverage is up to 10,000 square feet depending on ambient background noise levels.

1.7.1 Intelligibility Outdoor Field Test

The figure below shows the intelligibility outdoor field test of the device when it is used with the

011471 IP66 Outdoor Analog Horn.

Figure 1-3. Intelligibility Outdoor Field Test

591Ō

295Ō

BOOST3

intelligibility

limit

BOOST 1

intelligibility

limit

15 Ō high

Football

Field

0, 0

Ambient Noise:

~70dBC

Speaker Placement

59

1

Ō

59

9

1

Ō

722Ō

623Ō

443Ō

459Ō

377Ō

344Ō

623Ō

443Ō

295Ō

459Ō

377Ō

344Ō

Note: Boost 3 can be slightly distorted on the high

end of the audio waveform, but this boost will

output a higher dB level and is sƟll intelligibl e in

our tesƟ ng.

2

6

3

Ō

Product Overview

Typical Coverage

Operations Guide 931240J CyberData Corporation

7

1.7.2 Typical Warehouse Paging Setup

Figure 1-4. Typical Warehouse Paging Setup

Typical Example of a 70,000 Square Feet Warehouse Paging Set up

Office Bathroom

25' 25'

Loud Speaker Amplifier

Part Numbers: 011404 and 011405

Horn Speaker Horn SpeakerHorn Speaker Horn Speaker

"High Power Mode" with

Two (2) Horn Speakers Attached

Horn to Loud Speaker Amplifier

Horn Speaker to Horn Speaker

50'

Horn SpeakerHorn Speaker

Loud Speaker Amplifier

Product Overview

Compliance

Operations Guide 931240J CyberData Corporation

8

1.8 Compliance

1.8.1 CE Testing

CE testing has been performed according to EN ISO/IEC 17050 for Emissions, Immunity, and Safety.

Note You can download the Declaration of Conformity document from the Downloads tab of the

product’s webpage.

1.8.2 FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

Installing the SIP Loudspeaker Amplifier (AC-Powered)

Parts List

Operations Guide 931240J CyberData Corporation

9

2.1 Parts List

Ta ble 2-2 illustrates the parts for each SIP Loudspeaker Amplifier (AC-Powered).

Table 2-2. Parts List

Quantity Part Name Illustration

1 SIP Paging Amplifier Assembly

1 Enclosure

1 Installation Quick Reference Guide

1 PoE Power Injector

1 CAT 5e/CAT6 cable

1 Ground Wire

2 Installing the SIP Loudspeaker Amplifier

(AC-Powered)

Installing the SIP Loudspeaker Amplifier (AC-Powered)

Parts List

Operations Guide 931240J CyberData Corporation

10

1 Mounting Accessory Kit which includes:

(4) #8 Plastic Anchors

(4) #8 x 1-1/4" Pan Head Phillips Self-

Tapping Screws

1 IEC Power Cord

1 Universal Receptacle

Table 2-2. Parts List (continued)

Quantity Part Name Illustration

Phillip Drive

#8 x 1.25" Pan Head

Self-Tapping Screw (4x)

#8 Plastic Tri-Lobe

Light Duty Anchor (4x)

Installing the SIP Loudspeaker Amplifier (AC-Powered)

SIP Loudspeaker Amplifier (AC-Powered) Setup

Operations Guide 931240J CyberData Corporation

11

2.2 SIP Loudspeaker Amplifier (AC-Powered) Setup

Set up and configure each SIP Loudspeaker Amplifier (AC-Powered) before you mount it.

CyberData delivers each SIP Loudspeaker Amplifier (AC-P

owered) with the factory default values

indicated in

Table 2-3:

Parameter Factory Default Setting

IP Addressing DHCP

IP Address

a

10.10.10.10

Web Access Username admin

Web Access Password admin

Subnet Mask

a

255.0.0.0

Default Gateway

a

10.0.0.1

Table 2-3. Factory Default Settings—Default of Network

a.Default if there is not a DHCP server present.

Installing the SIP Loudspeaker Amplifier (AC-Powered)

SIP Loudspeaker Amplifier (AC-Powered) Setup

Operations Guide 931240J CyberData Corporation

12

2.2.1 SIP Loudspeaker Amplifier (AC-Powered) Components

Figure 2-5 shows the components of the SIP Loudspeaker Amplifier (AC-Powered).

Figure 2-5. SIP Loudspeaker Amplifier (AC-Powered) Components

SPD Link/Act.

PWR Status

Volume

RTFM

VoIP

Loudspeaker

The IP Endpoint Company

Speaker Volume

Speed (SPD) LED (AMBER)

The Speed (SPD) LED illuminates AMBER for a 100Mb link 

or is off for 10MB when the network link to the device is 

established.

Status LED (GREEN)

After supplying power to the device, a steady GREEN Status LED

illuminates. After about 20 seconds, the

GREEN Status LED will

blink fast to indicate that the device is acquiring an IP address and

attempting to autoprovision. The

GREEN Status LED will turn off

thereafter until the device has finished booting. When the device

has fully booted, the

GREEN Status LED will turn on solid to

confirm the device is operational.

The GREEN Status LED will blink during a page when it is online.

Link/Activity (Link/Act.) LED (GREEN) 

The GREEN Link/Activity (Link/Act.) LED blinks to indicate

network traffic.

Power (PWR) LED (GREEN/BLUE)

The Power (PWR) LED is GREEN in low power mode (

802.3af)

and BLUE during high power mode (802.3at).

RTFM Switch

To broadcast the device’s current IP address, use a bent

paperclip or a similar object to press and hold the RTFM switch

(located behind the hole) for a couple of seconds and then

release it.

To restore the factory defaults, complete the following steps:

1. Use a bent paperclip or a similar object to press and hold the

RTFM switch until you hear the device announce the words,

“restoring defaults” and “rebooting”.

2. Release the RTFM switch. The device will be restored to the

factory default settings.

Page is loading ...

CyberData 011404 Operations Guide

CyberData 011404 Operations Guide

Related papers

Other documents