Nautilus E626 Assembly & Owner's Manual

ASSEMBLY MANUAL / OWNER’S MANUAL

2

Important Safety Instructions 3

Safety Warning Labels / Serial Number 5

Earthing Instructions 6

Specications  7

BeforeAssembly  7

Parts 8

Hardware 9

Tools 9

Assembly 10

Moving the Machine 21

Leveling the Machine 21

Features 22

Console Features 23

Bluetooth

®

Connectivity 26

Remote Heart Rate Monitor 26

Operations 29

Power Up / Idle Mode 29

Initial Setup 30

Quick Start Program 30

 UserProles  30

 ProlePrograms  32

Pausing or Stopping 36

Results / Cool Down Mode 36

GOAL TRACK Statistics 36

Console Setup Mode 38

Maintenance 39

Maintenance Parts 40

Troubleshooting 42

TABLE OF CONTENTS

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase __________________________

To register your product warranty , contact your local distributor.

If you have questions or problems with your product, please contact your local Nautilus distributor.

Tondyourlocaldistributor,goto:www.nautilusinternational.comorwww.nautilus.cn

Nautilus,Inc.,www.nautilusinternational.com|Nautilus,Inc.,18225NERiversideParkway,Portland,OR97230USA|©2017

Nautilus, Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or

otherwiseprotectedbycommonlaw.Nautilus,theNautiluslogo,NautilusTrainer,NautilusConnect,Bowex,Schwinn,and

Universal are trademarks owned by or licensed to Nautilus, Inc. Polar

®

, OwnCode

®

, Loctite

®

, iTunes

®

, Google Play™, Under

Armour

®

, MyFitnessPal

®

,

and RunSocial™ are trademarks of their respective owners. The Bluetooth

®

word mark and logos are

registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Nautilus, Inc. is under license.

ORIGINAL MANUAL - ENGLISH VERSION ONLY

3

IMPORTANT SAFETY INSTRUCTIONS

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious

injury.

Obey the following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions. Read and understand the complete

Manual. Keep the Manual for future reference.

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this

machine from the electrical outlet immediately after using and before cleaning.

• Keep bystanders and children away from the product you are assembling at all times.

• Do not connect power supply to the machine until instructed to do so.

• The machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting

on or taking off parts.

• Beforeeachuse,examinethemachinefordamagetopowercord,loosepartsorsignsofwear.Donotuseiffoundin

this condition. Contact your local distributor for repair information.

• Do not drop or put objects into any opening of the machine.

• Do not assemble this machine outdoors or in a wet or moist location.

• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcandexposuretobystanders.

• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps

involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

• Set up this machine on a solid, level, horizontal surface.

• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and

will void the warranty.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use

genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the

warranty.

• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the

Manual.

• Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by

the manufacturer.

• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

• Connect this machine to a properly earthed outlet only (see Earthing Instructions).

• Keep the power cord away from heat sources and hot surfaces.

• Do no operate where aerosol products are being used.

• To disconnect, turn all controls to the off position, then remove plug from outlet.

• SAVE THESE INSTRUCTIONS.

Before using this equipment, obey the following warnings:

Read and understand the complete Manual. Keep the Manual for future reference.

Read and understand all warnings on this machine. If at any time the Warning labels become loose,

unreadable or dislodged, contact your local distributor for replacement labels.

• Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous

to children.

4

• Not intended for use by anyone under 14 years of age.

• Consultaphysicianbeforeyoustartanexerciseprogram.Stopexercisingifyoufeelpainortightnessinyour

chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the

values calculated or measured by the machine’s computer for reference purposes only.

• Beforeeachuse,examinethismachineforloosepartsorsignsofwear.Donotuseiffoundinthiscondition.

Monitor the Pedals and Crank Arms closely. Contact your local distributor for repair information.

• Maximumuserweightlimit:136kg(300lbs).Donotuseifyouareoverthisweight.

• This machine is for home use only.

• Donotwearlooseclothingorjewelry.Thismachinecontainsmovingparts.Donotputngersorotherobjectsinto

movingpartsoftheexerciseequipment.

• Set up and operate this machine on a solid, level, horizontal surface.

• Make the Foot Pedals stable before you step on them. Use caution when you step on and off the machine.

• Disconnect all power before servicing this machine.

• Do not operate this machine outdoors or in moist or wet locations.

• Keep at least 0.6 m (24”) on each side of the machine clear. This is the recommended safe distance for access

and passage around and emergency dismounts from the machine. Keep third parties out of this space when

machine is in use.

• Donotoverexertyourselfduringexercise.Operatethemachineinthemannerdescribedinthismanual.

• Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do

not hit the user.

• Keep the Foot Pedals clean and dry.

• Exerciseonthismachinerequirescoordinationandbalance.Besuretoanticipatethatchangesinspeedand

resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.

• A machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before

putting on or taking off parts.

• Prior to use, read and understand the owner’s manual. The appliance is not to be used by persons with functional

limitationsandimpairments,reducedphysical,sensoryormentalcapabilities,orlackofexperienceand

knowledge.

5

SAFETY WARNING LABELS AND

SERIAL NUMBER

Serial Number

REVISIONS

ECO

REVISION

REV DESCRIPTION

APPROVED

DATE

TITLE.

PART NO.

REV.

SHEET 1 OF 1

SCALE: 1:1

DO NOT SCALE DRAWING

1. ALL ITEMS MUST BE RoHS COMPLIANT

2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.

4. ALL MACHINES SURFACES Ra 3.2 uM.

5. ALL APPLICABLE NAUTILUS STANDARDS AND

SPECIFICATIONS APPLY.

6. ALL DIMENSIONS ARE IN MILLIMETERS

7. ALL DUAL DIMENSIONS ARE IN INCH

UNLESS OTHERWISE SPECIFIED:

METRIC

THIRD ANGLE

PROJECTION

INTERPRET DIMENSIONS AND TOLERANCES

PER ASME Y14.5M - 1994

2.5

1.5

0.75

0.25

1°

X.

X.X

X.XX

X.XXX

ANGULAR

C

SIZE

This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work for Nautilus, Inc. without written authorization. All rights are reserved, including copyrights.

TOLERANCES.

DRAWN

DESIGNED

DATE

METRIC_C_REV G

NAUTILUS, INC.

16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683

LIFECYCLE

7-22-10

APPROVALS

- -

- - - -

WARRANTY ITEM:

A RELEASED

NPI 13149 DLOVELY

7-22-10

D.LOVELY

07 /22 / 2010

D.LOVELY

A

004-0930

CRUSH WARNING

21.78mm

54.8mm

MATERIAL.

COLOR.

DIE LINE

PMS 152

PMS 109

BLACK

WHITE

Labels must be created from an agency approved tamper proof labeling system

such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.

Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),

Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.

•

ProductSpecication

6

Earthing Instructions

This product must be electrically earthed. If a malfunction occurs, correct earthing decreases the risk of electric shock. The

power cord is equipped with an equipment-earthing conductor, and must be connected to an outlet that is properly installed

and earthed.

The electrical wiring must comply with all applicable local and provincial standards and

requirements. Incorrect connection of the equipment-earthing conductor can result in a risk of

electric shock. Consult a licensed electrician if you are not sure that the machine is correctly

earthed. Do not change the plug on the machine – if it does not fit the outlet, have a correct

outlet installed by a licensed electrician.

If you connect the machine to an outlet with RCBO (Residual-Current circuit Breaker with Overload protection), machine

operation can cause the circuit to trip. A Surge Protector Device is recommended to protect the machine.

If a Surge Protector Device (SPD) is used with this machine, be sure that it matches the power rating of

this equipment. Do not connect other appliances or devices to the surge protector in combination with

this machine.

Make sure that the product is connected to an outlet having the same conﬁguration as the plug. No adapter should be used

with this product.

7

SPECIFICATIONS

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on

ahard,levelsurface.Allowaworkoutareaofaminimum190cmx303.5cm(74.7”x119.5”).Besurethattheworkout

spaceyouareutilizinghasadequateheightclearance,takingintoconsiderationtheheightoftheuserandthemaximum

incline of the elliptical machine.

Basic Assembly Tips

Follow these basic points when you assemble your machine:

• Read and understand the “Important Safety Instructions” before assembly.

• Collect all the pieces necessary for each assembly step.

• Using the recommended wrenches,

turn the bolts and nuts to the right

(clockwise) to tighten, and the left

(counterclockwise) to loosen, unless

instructed otherwise.

• When attaching 2 pieces, lightly lift

and look through the bolt holes to help

insert the bolt through the holes.

• The assembly can require 2 people.

160.5 cm

(63.2”)

181.7 cm

(71.5”)

67.7 cm

(26.7”)

DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,

please follow the prescribed methods at an approved waste center.

Maximum User Weight: 136 kg (300 lbs.)

Total Surface Area (footprint) of equipment: 12301 cm2

Maximum Pedal Height - with full incline: 24” (61 cm)

Machine Weight:   78.6kg(173.3lbs.)

Power Requirements:

Operational Voltage: 220V - 240V AC, 50/60Hz

Operating Current: 2 A

3m ( 120” )

1.9m

( 75” )

0.6m

( 24” )

0.6m

( 24” )

0.6m

( 24” )

0.6m

( 24” )

8

A decal has been applied to all right (“ R ”) and left (“ L ”) parts to assist with assembly.

Item Qty Description Item Qty Description

1 1 Console Mast 12 1 Frame

2 1 Console 13 1 Front Stabilizer

3 1 Static Handlebar Assembly 14 1 Lower Right Handlebar Arm

4 1 Upper Left Handlebar Arm 15 1 Upper Right Handlebar Arm

5 2 Handlebar Shroud, Outer 16 1 Upper Shroud

6 2 Handlebar Shroud, Inner 17 1 Shroud Cap

7 1 Rail Assembly 18 1 Right Leg

8 1 Arm Pivot Rod 19 1 Right Pedal

9 1 Left Leg 20 1 Power Cord

10 1 Lower Left Handlebar Arm 21 1 MP3 Cord

11 1 Left Pedal 22 1 Silicone Lubricant, Bottle (not shown)

PARTS

1

2

8

3

5

6

4

7

9

10

11

12

13

14

16

5

6

15

18

19

17

20

21

9

Item Qty Description Item Qty Description

A 4 ButtonHeadHexScrew,M8x16 F 6 Wave Washer

B 4 Serrated Washer, M8 G 2 HexHeadScrew,M8x20

C 8 Wide Washer, M8 H 2 Cap

D 8 Lock Washer, M8 I 2 Pivot Sleeve

E 6 ButtonHeadHexScrew,M8x16(with

Loctite

®

adhesive)

J 4 PhillipsHeadPanScrew,M5x12

Note: Select pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may be

remaining Hardware after the proper assembly of your machine.

HARDWARE / TOOLS

Tools

Included

6 mm

A B C D E F

G H

I

J

#2

13 mm

15 mm

19 mm

10

ASSEMBLY

1. Attach Front Stabilizer to Frame

Note: Hardware (*) is pre-installed and not on the Hardware Card.

13

6mm

*

X4

*

12

11

2. Attach Rail Assembly to Frame Assembly

Note: Hardware (*) is pre-installed and not on the Hardware Card.

7

12

3. Connect the Cables and Attach the Console Mast to Frame Assembly

NOTICE : Do not crimp cables.

17

1

6mm

X4

A

B

16

13

4. Attach Legs to Frame Assembly

F

X2

E

C

D

X2

6mm

9

18

14

5. Attach Arm Pivot Rod and Lower Handlebar Arms to Frame Assembly

Note: Be sure to put Wave Washers (F) on Arm Pivot Rod before attaching the Lower Handlebar Arms.

14

8

10

F

X2

C

D

G

X2

13 mm

H

15

6. Attach Left Pedal to Frame Assembly

NOTICE : Attach the Pedal to the Leg first. Make sure the Pivot Sleeve (I) engages the Handlebar knuckle cover.

Repeat step on opposite side with the Right Pedal (Item 19).

C

I

D

E

6mm

F

E

C

D

11

19

I

16

7. Attach and Adjust the Upper Handlebar Arms to Frame Assembly

Note: Hardware (*) is pre-installed and not on the Hardware Card.

Make sure the Upper Handlebar Arms are secure before you exercise.

*

X8

*

4

15

17

8. Attach Handlebar Shrouds to Frame Assembly

6

5

6

5

J

#2

X4

9. Remove Hardware from Console

Note: Hardware (*) is pre-installed and not on the

Hardware Card. If desired, apply the French Cana-

dian overlay to the Console face.

*

X4

#2

2

18

10. Route Cables through the Static Handlebar Assembly and Attach to Console

Note: Do not crimp the Cables. Connect the Heart Rate Cables from the Console and the Static Handlebar.

3

#2

*

X4

19

11. Connect the Cables and Attach the Console / Static Handlebar Assembly

Note: Do not crimp the Cables. Hardware (*) is pre-installed and not on the Hardware Card.

6mm

X3

*

20

12. Connect the Power Cord to Frame Assembly

Connect this machine to a properly grounded outlet only (see Earthing Instructions).

Note: When ready to operate the machine, be sure to turn on the power with the Power Switch.

13. Final Inspection

Inspect your machine to ensure that all fasteners are tight and components are properly assembled.

Note: Remove any protective covers from the face of the Console. Remove the plastic scratch guard strips from Rails.

Apply silicone lubricant to a cloth and wipe the Rails to eliminate roller noise.

Silicone lubricant is not intended for human consumption. Keep out of reach of children. Store

in a safe place.

Besuretorecordtheserialnumberintheeldprovidedatthefrontofthismanual.

Do not use until the machine has been fully assembled and inspected for correct performance in

accordance with the Owner’s Manual.

22

20

Page is loading ...

Nautilus E626 Assembly & Owner's Manual

Related papers

Other documents