Scotsman HD30, HD30 Brace retrofit kit, A39517-021 and A39517-022 - 17-3274-01 Operating instructions

Model: HD30, HD30 Brace retrofit kit, A39517-021 and A39517-022 - 17-3274-01

for brace retrofit kit, A39517-021 and A39517-022

The brace is intended to be installed with the ice machine in place.

1. Remove the top panel from the HD30 or HD22 dispenser.

2. Slide the brace from the kit under the ice machine, slipping the ends of it under the

gasket. Position the brace 1.5" from the front of the ice machine.

Note: Do not push it back too far or it will be in the way of the ice as it falls.

3. Seal up any rips in the gasket using the enclosed sealant.

4. Return the top panel to the dispenser and secure it to the dispenser with the original

screws.

17-3274-01 Rev A

Instructions

Model: HD30, HD30 Brace retrofit kit, A39517-021 and A39517-022 - 17-3274-01