Page is loading ...
MODEL T10280
3-SHELF
WELDING CART
INSTRUCTIONS
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
Introduction
Figure 1.
Specifications
Inventory
Page 3
To reduce the risk of serious personal injury
when using this welding cart:
• Do not allow children to play with or
near the cart.
• Do not exceed the cart weight capacity
of 110 lbs.
• Makesurethegasbottleisfirmlysecured
tothecartbeforeattemptingtouseitor
movethecart.
• Inspect the cart for worn or damaged
parts before using.
• Donotusethecartasagroundforthe
welder.
• Alwaysread,understand,andfollowthe
safety instructions included in the weld-
ersowner'smanual.
• Use this cart only for the designed
purpose. Do not modify the cart in any
way.
2.
Figure 3
Figure 3.
3.
Figure 4
4.
Note: Just hand-tighten these fastners for
now. They will be fully tightened in a later
step.
5.
Figure 5
Assembly
1.
Figure 2
6.
If you need help with your new welding cart, call
our Tech Support at: (570) 546-9663.
Figure 4.
Figure 2.
Figure 5.
Parts
REF PART # DESCRIPTION QTY REF PART # DESCRIPTION QTY
1 PT10280001 TOP SHELF 1 9 PB04M HEX BOLT M6-1 X 10 34
2 PT10280002 TORCH BRACKET 2 10 PT10280010 COTTER PIN M2.5 X 25 2
3 PT10280003 MIDDLE SHELF 1 11 PW06M FLAT WASHER 12MM 4
4 PT10280004 LEFT VERTICAL SUPPORT 1 12 PT10280012 WHEEL 6" 2
5 PT10280005 BASE 1 13 PT10280013 AXLE BRACKET 2
6 PT10280006 SWIVEL CASTER 2-1/2" 2 14 PT10280014 AXLE 1
7 PN01M HEX NUT M6-1 34 15 PT10280015 BACK PANEL 1
8 PT10280008 RIGHT VERTICAL SUPPORT 1 16 PT10280016 BOTTLE CHAIN 2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
NOTICE
Thepartsdiagramandlistareprovidedforinventory,assembly,andservicepurposesonly.The
individualpartsmaynotbeavailableforreplacement.
Buy Direct and Save with Grizzly
®
– Trusted, Proven and a Great Value!
~Since 1983~
ORDER
24 HOURS A DAY!
1-800-523-4777
Visit Our Website Today For
Current Specials!
/
