Craftsman 315.111810 Owner's manual

Brand: Craftsman

Model: 315.111810

Category: Power screwdrivers

Type: Owner's manual

This manual is also suitable for

315111810

Craftsman 315.111810 is a single-speed, reversible cordless screwdriver with many features to make driving operations more pleasant and enjoyable. It has a collet size of 1/4 in. and a motor of 2.4 Volts DC. The no-load speed is 165 RPM, and the torque is 20 in. Lbs. The screwdriver comes with a charger with a rating of 120 Volts, 60 Hz, AC Only. The charge rate is 3-5 hours. The screwdriver has a single-speed, reversible switch. It is lightweight and easy to use, making it ideal for a variety of tasks, including assembling furniture, hanging pictures, and making repairs around the house.

Owner's Manual !

CRRFTSMRN°

Single Speed / Reversible

CORDLESS SCREWDRIVER

Model No.

315.111810

Save this manualfor

future reference

CAUTION: Read and

follow all Safety Rules anlLIBRARY:.

Operating Instructions

before first use of this

product.

Sears, Roebuck and Co., I-LO_llan Estates, I_._S,_'

972000-446

9-97

• Table Of Contents ................................................................................................................................ _._.._....2

• Warranty ......................................................................................................................................................... 2

• Introductionand ProductSpecifications......................................................................................................... 2

• RulesFor Safe Operation ........................................................................................................................... 3-5

A. ImportantSafety Rules For BatteryTools .............................................................................................. 4

B. ImportantSafety InstructionsFor Charger .......................................................................................... 4-5

• Accessodes.................................................................................................................................................... 5

• Features ......................................................................................................................................................... 6

• Operation..................................................................................................................................................... 7-9

• Maintenance................................................................................................................................................. 10

• BatteryRemoval ........................................................................................................................................... 11

A. BatteryRemoval, Preparation For Recycling....................................................................................... 11

• Replacement Parts ................................................................................. .:.................................................... 11

• Parts Ordering/ Service............................................................................................................................... 12

FULL ONE YEAR WARRANTY ON CRAFTSMAN CORDLESS SCREWDRIVER

If this CRAFTSNAN Cordless Screwdriverfails togive complete satisfactionwithinone year fromthe date of

purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears willreplace it,

free of charge.

If this rRAFlrSNRN Cordless ScrewdriveriSused forcommemialor rental purposes,this warrantyappliesfor

only90 days fromthe date ofpurchase,

Thiswarranty gives you specificlegal rights,and you may also have otherrightswhichvary fromstate tostate.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

Yourscrewdriverhas many features formaking

driving operationsmore pleasant and enjoyable.

Safety, performanceand dependabilityhave been

given toppriorityinthe designofthis screwdriver

makingit easy to maintainand operate.

CAUTION: Carefully read throughthis entire

owner's manual beforeusingyour new

screwdriver.Pay closeattentiontothe Rules For

Safe Operation, Warningsand Cautions. Ifyou

useyour screwdriver properlyand onlyforwhat it

isintended,you will enjoyyears of safe, reliable

SPECIFICATIONS:

Collet 1/4 in.

Motor 2.4 Volts DC

Charger Rating 120 Volts,60 Hz, AC Only

No Load Speed 165 RPM

Switch Single Speed - Reversible

Charge Rate 3-5 Hours

tl_._;_J 20 in. Lbs.

,_-Look for this symbol to point out important safely Precautions. It means attention!!! Your

_Pf_e]yJsjnvolved ....

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and

the explanations wlth them, deserve your careful attention and understanding, The safety wamlngs do _

not by themselves ellmlnate any danger. The Instructions or warnings they give are not substltutes for

proper accident prevention measures.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

Indicatescautionorwarning.Maybeusedinconjunctionwithothersymbolsorpictographs.

WARNING: Failureto obey asafety warningcan resultin seriousinjuryto yourselforto others.

Alwaysfollowthe safety precautionsto reduce the dskof fire,electricshockand personalinjury.

CAUTION: Failureto obeya safetywarningmay resultinpropertydamage or personalinjuryto

yourselfor toothers.Alwaysfollow thesafety precautionstoreduce_thedskoffire, electdcshock

and personalinjury.

NOTE: Advisesyou of informationor instructionsvital tothe operationor maintenanceof the equipment._-" *-

_k WARNING: Do not attemptto operatethis tool •

untilyou have read thoroughlyand understand

completelyall instructions,safety rules, etc.

containedin this manual. Failure to comply can

resultin accidents involvingfire, electricshock,

or sedous personalinjury.Save owner'smanual •

and reviewfrequently for continuingsafe

operation,and instructingotherswho may use

this tool.

READ ALL INSTRUCTIONS

KNOW YOUR POWER TOOL. Read owner's

manual carefully. Learn its applications and

limitations as well as the specific potential

hazards related to this tool.

GUARD AGAINST ELECTRICAL SHOCK by

preventingbody contactwithgroundedsurfaces.

Forexample: Pipes, radiators,ranges, refrigera-

tor enclosures.

• KEEP WORK AREA CLEAN. Cluttered areas

and benches invite accidents.

AVOID DANGEROUS ENVIRONMENT. Don't

use power toolin damp orwet locationsor

expose to rain. Keep workarea well lit.

KEEP CHILDREN AND VISITORS AWAY. All

visitorsshouldwear safety glassesand be kept a

safe distancefromwork area. Do not let visitors

contacttoolor extension cord.

STORE IDLE TOOLS. When not in use tools

should be stored in a dry and highor locked-up

place- out of the reach of children.

DON'T FORCE TOOL. It will do the job better

and safer at the rate for which it was designed.

USE RIGHT TOOL Don'tforce smalltoolor

attachmentto do the job of a heavy dutytool.

Don't usa toolfor purposenot intended - for

example - A circularsaw should never be used

for cuttingtree limbsor logs.

WEAR PROPER APPAREL. Do not wear loose

clothingor jewelrythat can get caught intool's

movingparts and cause personal injury.Rubber

glovesand nonskidfootwear are recommended

whenworkingoutdoors.Wear protectivehair

coveringtocontainlong hairand keep it from

being drawnintonearby air vents.

ALWAYS WEAR SAFETY GLASSES. Everyday

eyeglasses have only impact-resistant lenses;

they are NOT safety glasses,

PROTECT YOUR LUNGS. Wear a face mask or

dust maskifoperation isdusty.

PROTECT YOUR HEARING. Wear headng

protectionduringextended periodsof operation.

SECURE WORK. Use clampsor a viseto hold

work. It'ssafer than usingyour hand and it frees

both hands tooperate tool.

DON'T OVERREACH. Keep proper footing and

balance at all times. Do not use on a ladder or

unstable supped.

MAINTAIN TOOLS WITH CARE. Keep tools

sharp at all times, and clean for best and safest

performance. Follow instructions for lubricating

and changing accessories.

REMOVE ADJUSTING KEYS AND

WRENCHES. Form habit of checking to see that

keys and adjusting wrenches are removed from

tool before turning it on

RULESFORSAFEOPERATION(Continued)

NEVER USE IN AN EXPLOSIVE ATMO-

SPHERE. Normal sparking of the motor could

ignite flammable liquids, gases, or fumes.

KEEP HANDLES DRY, CLEAN, AND FREE

FROM OIL AND GREASE. Alwaysuse a clean

cloth whencleaning. Never use brake fluids,

gasoline,petroleum-based productsor any

strongsolventsto clean your tool

STAY ALERT. Watch what you are doing and

use common sense. Do not operate tool when

you are tired. Do not rush.

CHECK DAMAGED PARTS. Before further use

of the tool, a guard or other part that is damaged

should be carefully checked to determine that it

will operate properly and perform its intended

function. Chock for alignment of moving pads,

binding of moving pads, breakage of parts,

mounting, and any other conditions that may

affect its operation. A guard or other part that is

damaged should be properly repaired or

replaced by an authorized service center unless

indicated elsewhere in this instruction manual.

DO NOT USE TOOL IF SWITCH DOI_S NOT

TURN IT ON AND OFF. Have defective switches

replaced by an authorized service center.

DRUGS, ALCOHOL, MEDICATION. Do not

operate tool while under the influence of drugs,

alcohol, or any medication.

DRIVING SCREWS INTO ELECTRICAL

WIRING IN WALLS, CEILINGS, OR OTHER

AREAS CAN CAUSE THE SCREWDRIVER BIT

OR COLLET TO BECOME ELECTRICALLY

LIVE. Do not touch metal parts when driving

screws into a wall; grasp only the insulated

handle(s) or plastic housing when using this tool.

Make sure hidden electrical wiring, water pipes,

and mechanical hazards are not in the path of

the bit when driving screws into a wall.

• INSPECT FOR and remove all nails from lumber

before driving screws.

IMPORTANT SAFETY RULES FOR BATTERY

TOOLS

Battery toolsdo not have to be plugged intoan

electricaloutlet; therefore, theyare always in

operatingcondition.Be aware of possible

hazards when not using yourbatterytoolor

when changing accessories.

USE ONLY THE CHARGER PROVIDED WITH

YOUR BATTERY TOOL. Do notsubstituteany

other charger. Use of another chargercould

cause batteries toexplode causing possible

serious injury.

DO NOT PLACE BATTERY TOOLS OR THEIR

BATTERIES NEAR FIRE OR HEAT. Theymay

explode.

DO NOT CHARGE BA'FrERY TOOL IN A

DAMP OR WET LOCATION.

Your batterytoolshould be charged in a location

where the temperature is morethan 50°F but

lessthan 100°F.

Under extreme usage or temperature conditions,

batteryleakage may occur. If liquidcomes in

contactwith your skin, wash immediatelywith

soap and water, then neutralize withlemonjuice

or vinegar. If liquidgets in youreyes, flush them

with cleanwater for at least 10 minutes,then

seek immediate medicalattention.

if carryingyour batterytool at yourside, make

sure itis not runningand your finger isnot__on the

switch.Avoid accidentalstarting.

SECURE WORK before applyingpower, NEVER

hold workpiecein yourhand or acrossyour legs.

WHEN SERVICING USE ONLY IDENTICAL

CRAFTSMAN REPLACEMENT PARTS,

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER

• SAVE THESE INSTRUCTIONS. This manual

contains importantsafety and operating

instructionsforbatterycharger part number

999555-001.

Before usingbattery charger, read allinstructions

and cautionarymarkings in this manual, on

battery charger, and product using battery

charger,

_k WARNING: To reduce riskof injury,charge only

nickel-cadmiumtype rechargeable batteries.

Other types ofbatteries may burstcausing

personal injuryand damage.

Do not expose charger to rain or snow.

Use of an attachment notrecommended orsold

by the batterycharger manufacturermay result

in a riskoffire, electricshock, or injuryto

persons.

To reduce risk ofdamage to charger body and

cord, pullby charger bodyrather than cordwhen

disconnectingcharger.

Make sure cordislocated sothat it willnet be

stepped on, tripped over, or otherwisesubjected

to damage or stress.

RULESFORSAFEOPERATION(Continued)

Anextensioncordshouldnotbeusedunless

absolutelynecessary,Useofimproper

extensioncordcouldresultinariskoffireand

electricshock.Ifextensioncord must be used,

make sure:

a. That pinson plug ofextensioncord are the

same number, size and shape as those of

plugon charger.

b. That extensioncord isproperlywired and in

good eiactdcalcondition; and

c. That wire size is largeenough for AC

ampere ratingofcharger as specified

below:

Cord Length(Feet) 25ft. 5Oft. 100ft. 150ft.

Cord Size (AWG) 16 16 16 14

Note: AWG = American Wire Gage

• DO NOT OPERATE CHARGER WITH A

DAMAGED CORD OR PLUG. Ifdamaged, have

replacedimmediatelybyaqualifiedserviceman.

Do not operate charger ifit has receiveda

sharp blow,been dropped, or othen,#ise

damaged in any way;take it toa qualified

serviceman.

Do not disassemblecharger;take itto a

qualifiedserviceman when service or repairis

required, Incorrectreassemblymay resultin a

dskof electricshockor fire.

To reduce risk ofelectdcshock, unplugcharger

from outletbeforeattempting any maintenance

or cleaning. Turning off controls will not reduce

this risk.

• Do not use charger outdoors.

• Disconnectcharger frompower supplywhen

notin use.

SAVE THESE INSTRUCTIONS. Referto them

frequentlyand use-them toinstructotherswho

may use thistool, If you loan someonethis tool,

loanthem these instructionsalso,

_1= WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes,

which can result in severe eye damage, Before beginning power tool operation, always wear

safety goggles or safety glasses with side shields and a full face shield when needed, We

recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses

with side shields, avaiEable at Sears Retail Stores.

,_ WARNING: Do not allow familiarity with your

screwdriver to make you careless, Remember

that a careless fraction of a second is sufficient to

inflict severe injury.

,_ CAUTION: Your screwdrivercontainsspecial

hightemperature batteriesto help prevent

batterydamage when lefton charge for extended

periodsof time. However,once the batteries

become fullycharged, we recommendthat you

unplugyourcharger from powersupplyand

disconnectitfrom scrswddver.

The fo ow ng recommended accessories are_urrently available at Sears Retail Stores.

No, 2 Phillips/ 8-10 Slotted,2 Ea.

No. 3 Phillips/ 6-8 Slotted, 2 Ea.

5-Pc. Hex Shank Drill BitSet

6-Pc. Extra LengthScrewdriverBitSet

"/-Pc. ScrewdriverBitSet and Case

13-Pc. Power Screwdriver/ NutdriverSet and

Case

30-Pc. Power Scrawddver/Nutdriver Set and

Case

17-Pc, Power Screwdriver/Nutdriver Set and

Case

_. WARNING: The useofattachmentsor accessories not listedmightbe hazardous,

KNOW YOUR SCREWDRIVER

See Figure 1.

Before attemptingto use your screwdriver,familiadze

yourselfwithall operatingfeatures and safety

requirements.

WARNING: If any partsare missing,do_01"

operate tooluntilthe missingpartsare replaced.

Failure to do so could resultin possibleserious

personal injury.

REVERSE

_EWOFSCREWDRIVERIN OPERA_NGPosmoN

FORWARD(_

REVERSE_)SWITCH

FORWARD

CENTER

POSITION_OCK)

ADJUSTMENT CAP

WRISTSTRAP

VIEW OF SCREWDRIVER IN UPSIDE DOWN POSITION

SWITCHTRIGGER

LIGHTSWITCH

UGHT

ENDCAP

WlTHEXTRA

BULBSTORAGE

LIGHT

As shownin figure 1, your screwdriverhas been

designedwith a light. Thisfeature is convenientwhen

workingin closeor tight areas where additionallightis

needed.

Fig. 1

WRIST STRAP

See Figure 1.

A wriststrapisprovidedto reduce the chancesof

droppingyour screwdriver.Place one hand through

the wriststrap when carryingtool,

CHARGING YOUR SCREWDRIVER

Your screwdriver has been shipped in a low charge

condition to prevent possible problems. Therefore,

you should charge it at least 3 hours prior to use.

Note: Batteries will not reach ful! charge the first time

they are charged. Allow several cycles (driving

screws followed by recharging) for them to become

fully charged.

If the charger does not charge your screwdriver under

normal circumstances, return both the screwdriver

and charger to your nearest Sears repair center for

electrical check.

CHARGING STAND

See Figure2.

CHARGING

PILOTHOLES

SCREWS

WALL

ANCHORS

BIT

CHARGE

UGHT(LED)

STORAGE

AREA

CHARGER

BO'I'rOMOF

CHARGING STAND INPUT

CHARGERPLUG

Fig. 2

For storage convenience,a chargingstand withbit

storage has been providedwith your screwdriver.It

has the capacityof storingyour screwdriverand two

(2) bitswhichare also includedwith yourscrewdriver.

TO MOUNT CHARGING STAND

See Figures2 and 3.

2-3/8 in.

BACK SIDE OFCHARGINGSTAND Fig. 3

• Locate close to an electrical outlet.

Note: Temporarily place your screwdriver in

charging stand. Check to make sure it will not

interfere with the charger or electrical outlet.

• Drill two (2) pilot holes then insert the two (2)

wall anchors provided.

Note: Pilot holes should be 2-3/8 inches apart.

See Figure 3.

• Position charging stand on wall aligning holes in

charging stand with pilot holes.

• Secure charging stand with the two (2) screws

provided.

TO CHARGE

• Place the forward/reverse switchin center

position.

• Place screwdriverin chargingstand.

Note: Screwdrivermust be inchargingstand tobe

charged.

• Insertcharger plugintoinputjack making sure

theyare propertyconnected.

• Charger can be used with normal house

voltage of 120 volts, 60 Hz, AC only.

• Connectcharger to powersupply.

• The charge indicatorlight(LED) indicator,whichis

locatedon the chargingstand, willlightupwhen

charger ispropedyconnected topower supply.

This red lightindicatesyour screwdriverischarg-

ingand willremain on untilcharger is discon-

nectedfrom power supply.

• Afternormalusage, a minimumof3 hours of

chargingtime isrequiredto be fully charged.

• DO NOT place charger in an area ofextreme heat

orcold. It worksbest at normalroomtemperature.

SWITCH

See Figure 4,

To turnyour screwdriverON, depressswitchtriggerin

the directionofthe arrow infigure 4. To turn itOFF,

releasethe switchtdgger.

REVERSIBLE

See Figure5.

Fig. 4

REVERSE(R) FORWARD(_

FORWARD(_

CENTER REVERSE(R)

PosmoN SWITCH

(LOC_

Your screwdriverisequippedwith a Forward/litllmrse

Switchwhichallows you tochange the directionof

rotationof the bit. For ddvingor forwardrotation,slide

the switchto the forward(F) position.To reversethe

bitdirection,slide the switchtothe reverse(R)

position.

CAUTION: To preventgear damage, always

allow bitto come toa complete stopbefore

changingthe directionof bit mtation.

To stop yourscrewdriver,release switchtdggerand

allow yourscrewdrivertocome toa complete stop.

SWITCH LOCK

See Figure 5.

The switchtrigger can be lockedin the OFF position.

This feature can be usedto preventthe pessi_"ity of

accidental startingwhen not in use. To lockswitch

tdgger, place the forward/reverse switchin center

position.

_ WARNING: Batterytoolsare always in

operatingcondition. Therefore, switchshould

always be locked when not in usaor carrying at

your side.

_ WARNING: Always wear safety goggles or

safety glasses with side shields when operating

tools. Failure to do so could result in objects

being thrown into your eyes, resulting in possible

serious injury.

Fig. 5

COLLET

Thecolletonyourscrewdriverhasbeendesignedto

accept1/4in,hoxbits.See Figure 6,

COLLET

Fig. 6

TO INSERT BIT

See Figure 6.

• Lockswitchtdgger byplacingthe forward/reverse

switchin center position.See Figure 5.

• Insert bitintocolletas far as possible,

• When finishedusingyour screwdriver,remove bit

fromcolletand place it in chargingstandfor

storage. See Figure2.

BITSINCLUDED WITHCORDLESS SCREWDRIVER I

Double-ended Bit(#1 Phillipsand #5 Slotted)

Double-ended Bit (#2 Phillipsand #7 Slotted)

ADJUSTABLE TORQUE CLUTCH

(Tightening Power of Your Screwdriver)

See Figure

INCREASETOROUE

J TORQUE

ADJUSTMENT

CAP

DECREASETORQUE Fig. 7

When usingyour screwdriverfor various driving

applications,it becomes necessaryto increaseor

decrease the power and torquein orderto help

preventthe possibilityofdamaging screwheads,

threads, workpiece, etc. In general, power and torque

shouldcorrespondto the difficultyof the screwto be

ddven. If torqueis too highthe screws may be

damaged or broken.

Note: Your screwdriver has been shippedwiththe

adjustabletorqueclutchset at the lowest torque

setting.

TO ADJUST TORQUE

See Figure 7.

• Locatearrow ontorque adjustmentcap.

• To increase torque, rotate torqueadjustmentcap

inthe directionof the arrow, When cap stops

rotating,you have reached the highesttorque-

setting.To decrease torque, rotatetorque adjust-

ment cap in the oppositedirectionofthe arrow.

When cap stops rotating,you have reached the

lowesttorquesetting.

BATrERIES

Your scrowddverisequippedwith 2 nickel-cadmium

rechargeable batteries.Lengthof servicefrom each

chargingwill depend on the type ofworkyou are

doing.

The batteries in thistoolhave been designed to

providemaximum troublefree life, However, like all

batteries,they willeventuallywear out.To remove

batteries,see page 11, BatteryRemoval. Handling of

these batteries,especially whenwearing dngsand

jewelry, could resultin a serious burn,

To obtain the longestpossiblebatterylife, we suggest

the following:

• Store and charge yourbatteries in a cool area.

Temperatures above normalroomtemperature

willshorten batterylife.

• Never storebatteries in a dischargedcondition.

Rechargethem immediately after theyare dis-

charged.

• All batteriesgradually losetheir charge. The

higherthe temperature,the quickerthey losetheir

charge. If you storeyour toolfor longperiodsof

timewithout usingit, rechargethe batteriesevery

monthor two. Thispracticewillprolongbattery

life.

_, WARNING: When servicing,use only identical

Craftsman replacement parts. Use ofany other

part may create a hazard or cause product

damage.

,_ WARNING: Donot at any time let brakefluids,

gasoline, petroleum-based products,penetrating

oils, etc. come in contactwithplastic parts.They

containchemicalsthat can damage, weaken or

destroy plastic.

Only the partsshown on parts list,page 11, are

intended to be repaired or replaced bythe customer•

All other partsshouldbe replaced by a qualified

servicetechnician at an authorized servicefacility.

Avoid usingsolvents when cleaning plasticparts.

Most plasticsare susceptibleto damage from various

types ofcommercial solvents and may be damaged

by their use. Use clean clothsto remove dirt,dust, oil,

grease, etc.

DO NOT ABUSE POWER TOOLS. Abusivepractices

can damage toolas well as workpiece.

_k WARNING: Do not attempt to modifythis toolor

create accessoriesnot recommendedfor use

with thistool•Any suchalterationor modification

is misuseand couldresultin a hazardous

conditionleadingto possibleserious personal

injury.

BULB REPLACEMENT

See Figures 8 and 9.

• Loci< switch trigger by placing the forward/reverse

switch in center position.

• Remove bulb cover.

Note: Depress bulb cover and slide forward as

shown by the arrows in figure 8 to remove.

SUDEFORWARD DEPRESSHERE

BULB

COVER

Remove old bulb by liftingit from socket.

Foryour convemence,a bulb storagearea withan

extra bulbhas been provided.It is locatedinside

the end cap on the bottomofyour screwdriver.

See Figure 9.

BULB

STORAGE

AREA

TOREMOVE

ENDCAP

MOTOR

HOUSING

EXTRA END

BULB CAP

TOREPLACE

ENDCAP Fig. 9

• Remove end cap by twistingit inthe directionof

the arrow as shownin figure 9.

• Positionnew bulb insocket.

• Replace bulbcover by insertingtab intoslot.

• Replace end cap.

BULB

SOCKET

Fig. 8

To preservenaturalresources,please

recycleor disposeofexpiredbatteries

This productcontains nickel-cadmium

battery. Mustbe disposedof properly.

Local,state, or federal laws may prohibitdisposalof

nickel-cadmiumbatteries in ordinarytrash.

Consultyour localwaste authorityfor information

regardingavailable recyclingand/or disposaloptions.

BATTERY REMOVAL, PREPARATION FOR

RECYCLING

SeeRgurel_

TO REMOVE:

• Lock switchtdgger by placingthe forward/reverse

switchin center position.See Figure 5.

• Remove end cap securing batteriesby twistingit

in the directionof the arrow as shownin figure 10.

• Slide batteriesfrom motorhousingenoughto

exposeleads and batteryterminals. Disconnect

leadsfrombattery terminals.Note where each

lead connectstobattery terminals.Connection

must beidenticalwhen installingnew batteries.

Note: Be careful notto break batteryterminals

when disconnectingleads.

_k WARNING: Upon removal, cover the battery's

terminals with heavy duty adhesive tape. Do not

attempt to destroy or disassemble battery or

remove any of its components. Nickel-cadmium

batteries must be recycled or disposed of

properly. Also, never touch both terminals with

metal objects and/or body parts as short circuit

may result, Keep away from children. Failure to

comply with these warnings coutd result in fire

and/or serious injury,

TERMINAL

MOTOR

HOU_NG

TOREMOVE

ENDCAP

TO REPLACE

ENDCAP ENDCAP

BAKERY

LEADS

BATTERIES

BA'I'rERY

TERMINAL

Fig. 10 H

WHEN SERVICING, USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS

Key Part

No. Number Description

1 974277-003 BatteryPack .

2 999555-001 Battery Charger

3 974385-002 Charging Stand

972000-446 Owner's Manual

Forthe repairor replacementpartsyouneed

delivereddirectlyto yourhome

Call7 am- 7 pm,7 daysaweek

1-800-366-PART

(1-800-366-7278)

Forrepairservice

Call24 hoursa day,7 daysaweek

1-800-4-REPAIR

(1-800-473-7247)

Forthe locationof a

SearsPartsandRepairCenterinyourarea

Call24 hoursaday,7daysaweek

1-800-488-1 222

imiii|

Themodelnumberofthistoolwill befoundonaserialplate

attachedtothemotorhousing.Whenrequestingserviceor

order!ngparts,alwaysprovidethefollowinginformation:

• ProductName

Cordless

Screwdriver

• Model Number

315.111810

SEARS

• PartName • PartNumber America'sRepairSpecia/ists

Craftsman 315.111810 Owner's manual

Brand: Craftsman

Model: 315.111810

Category: Power screwdrivers

Type: Owner's manual

This manual is also suitable for

315111810

Download PDF

report

Craftsman 315.111810 Owner's manual

This manual is also suitable for

Craftsman 315.111810 Owner's manual

Related papers

Other documents