Contents:
• Pick-it-up Truck
• Truck Driver Buddy
• Cat Buddy
®
™
• 4 Snap-On wheels
• Scooping-Action bolt bucket
• 18 Bolts
• Kid-Friendly power drill with clear socket bit
• Guide
Welcome to the world of Design & Drill
®
Bolt Buddies™ where your little one
learns the basics of simple construction and engineering, while building ne
motor skills with tools designed to be just right for tiny hands. Just like your little
builder, Bolt Buddies express a wide range of emotions that can be swip-swapped
to create characters that help little ones express all their big feelings. Bolt Buddies
are ready to work, so let’s build a better world. Come play with us!
Let’s Build Together!
™
™
Welcome to the world of Design & Drill
®
Bolt Buddies™ where your little one
Let’s Build Together!
2 3
Step 1:
Snap together the parts.
Step 2:
Use the power drill to screw the clear bolts
into the holes of the truck parts. Make
sure all the parts are secured with bolts
to prevent parts from being lost during
play. Each Bolt Buddy also doubles as a
screwdriver!
Step 3:
Use a bolt to assemble your Bolt
Buddy, then put on the hat and
you’re ready to work!
Getting started:
1. Insert 3 AAA batteries into battery compartment of the power drill (see Battery
Installation and Instructions in this guide).
2. Help your child snap the bit into power drill.
3. Point out the three positions of the power switch—forward, off, and reverse.
Battery Installation and Instructions
1. Drill requires three AAA batteries, not included.
2. Batteries must be inserted with the correct polarity.
3. Do not mix old and new batteries.
4. Do not recharge non-rechargeable batteries.
5. Do not use rechargeable batteries.
6. Do not mix different types of batteries: alkaline, standard (carbon zinc),
or rechargeable batteries.
7. Only use batteries of the same or equivalent type.
8. Remove exhausted batteries from the unit.
9. Do not short-circuit the supply terminals.
10. Only charge rechargeable batteries under adult supervision.
11. Remove rechargeable batteries from the toy before charging.
To prevent corrosion and possible damage to the product, it is recommended
to remove the batteries from the unit if it will not be used for more than two weeks.
Use the power drill to screw the clear bolts
Page is loading ...
Page is loading ...
Page is loading ...
/
