USB 2.0 Windows 98SE Installation: Place the installation CD in the CD-ROM and connect the drive
enclosure to your computer. Auto Detect will run the Add New Hardware wizard, which searches for
new drivers for the USB 2.0 enclosure. Click "Next.
Select "Search for the best driver for your device (recommended)"; click "Next."
Select "Specify location"; browse to "CD-ROM E:\USB 2.0-98 Driver"; click "Next."
With the prompt "Windows driver file search for the device Hi-Speed USB-to-IDE Bridge Controller,"
click "Next" to get the prompt "Windows has finished installing the software that your new hardware
device requires." Click "Finish."
Installation is complete; just restart your computer. NOTE: For Windows Me/2000/XP/Vista/7, no
need to install the additional driver: It’s already installed. Windows XP needs to be updated with SP2.
specificAtions
• 40-pin IDE internal and 4-pin
Molex power connections
• Prolic (PL-2507) chipset
• Internal cooling fan
• Hi-Speed USB 2.0 B-type port
• DC power input, 6-pin (AC
adapter included)
• Audio input, 3.5 mm stereo
• 0.9 kg (31.7 oz.)
• 26 x 17 x 5.5 cm
(10.25 x 6.875 x 2.25 in.)
System Requirements
• Pentium 266 MHz or higher
• 64 MB RAM
• Windows 98/Me/2000/XP/
Vista/7 or Mac OS x 10.0.4-
10.1.3 / 9.2.2 and above
Package Contents
• Drive Enclosure with built-in fan
• USB A-type male to B-type male
cable, 4 ft. (1.2 m)
• AC power adapter with cable,
9 ft. (2.7 m)
• User manual, CD driver,
installation screws and metal
enclosure stand