AOC e2752She User manual

LCD Monitor User Manual

www.aoc.com

E2752SHE

LED Backlight

1

Safety ...................................................................................................................................................................... 4

National Conventions

....................................................................................................................................... 4

Power .............................................................................................................................................................. 5

Installation

........................................................................................................................................................

6

Cleaning

..........................................................................................................................................................

7

Other

................................................................................................................................................................

8

Setup ...................................................................................................................................................................... 9

Contents of the box

.........................................................................................................................................

9

Setup Stand & Base

......................................................................................................................................... 10

Adjusting Viewing Angle

................................................................................................................................... 11

Connecting the Monitor .................................................................................................................................... 12

Adjusting

................................................................................................................................................................. 13

Setting Optimal Resolution .............................................................................................................................. 13

Windows Vista

.......................................................................................................................................... 13

Windows XP

............................................................................................................................................. 15

Windows ME/2000

.................................................................................................................................... 16

Hotkeys

............................................................................................................................................................ 19

OSD Setting

..................................................................................................................................................... 20

Luminance

................................................................................................................................................

21

Image Setup

............................................................................................................................................. 23

Color Setup ............................................................................................................................................... 25

Picture Boost

............................................................................................................................................ 27

OSD Setup

............................................................................................................................................... 29

Extra ......................................................................................................................................................... 31

Exit

........................................................................................................................................................... 34

LED Indicator

................................................................................................................................................... 35

Driver

...................................................................................................................................................................... 36

Monitor Driver .................................................................................................................................................. 36

Windows 7

................................................................................................................................................ 36

Windows Vista

..........................................................................................................................................

40

Windows XP

............................................................................................................................................. 42

Windows 2000

.......................................................................................................................................... 46

Windows ME

............................................................................................................................................. 46

i-Menu

.............................................................................................................................................................. 47

e-Saver ............................................................................................................................................................ 48

Screen+

........................................................................................................................................................... 49

Troubleshoot

...........................................................................................................................................................

50

Specification

............................................................................................................................................................

52

General Specification ....................................................................................................................................... 52

Preset Display Modes

...................................................................................................................................... 53

Pin Assignments

.............................................................................................................................................. 54

Plug and Play

................................................................................................................................................... 55

Regulatio .................................................................................................................................................................

56

FCC Notice

...................................................................................................................................................... 56

WEEE Declaration

........................................................................................................................................... 57

Windows 8 ................................................................................................................................................17

Windows 8

................................................................................................................................................

45

2

Service ............................................................................................................................................................. 58

Warranty Statement for Europe

........................................................................................................................ 58

Warranty Statement for North & South America (excluding Brazil) ........................................................... 59

3

Safety

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.

These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some

warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific

presentation of the warning is mandated by regulatory authority.

4

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure

of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug

will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire

plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat

the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect

the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate

configured receptacles marked between 100 - 240V ~, Min. 5A

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only for

monitors with power adapter).

5

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and

use mounting accessories recommended by the manufacturer. A product and cart combination should be moved

with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or

electric shock. Never spill liquids on the monitor.

Do not place the front of the product on the floor.

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a fire or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on

the stand:

6

Cleaning

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of

strong-detergent which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough

as it will scratch the screen surface.

Please disconnect the power cord before cleaning the product.

7

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and

contact a Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

8

Setup

Contents of the box

Monitor

CD Manual Base USB Cable

Power Cable Analog Cable

HDMI Cable Audio Cable

Not all signal cables (Audio,Analog and HDMI cables) will be provided for all countries and regions.

Please check with the local dealer or AOC branch office for confirmation.

9

Setup Stand & Base

Please setup or remove the base following the steps as below.

Setup:

Remove:

10

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your

own preference.

Hold the stand so you will not topple the monitor when you change the monitor's angle.

You are able to adjust the monitor's angle from -3° to 20 °.

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

11

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

1. Power

2. HDMI 1

3. HDMI 2

4. D-SUB

5. Audio

To protect equipment, always turn off the PC and LCD monitor before connecting.

1. Connect the power cable to the AC port on the back of the monitor.

3. (Optional – Requires a video card with HDMI1/HDMI2) - Connect one end of the HDMI1/HDMI2 cable to the back of

the monitor and connect the other end to the computer’s HDMI1/HDMI2.

4. Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, please refer

Troubleshooting.

2. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub

port.

1 2 3 4 5

12

Adjusting

Setting Optimal Resolution

Windows Vista

For Windows Vista:

1 Click START.

2 Click CONTROL PANEL.

3 Click Appearance and Personalization.

4 Click Personalization

13

5 Click Display Settings.

6 Set the resolution SLIDE-BAR to 1920 by 1080.

14

Windows XP

For Windows XP:

1 Click STAR T.

2 Click SETTINGS.

3 Click CONTROL PANEL.

4 Click Appearance and Themes.

5 Double click DISPLAY.

15

6 Click SETTINGS.

7 Set the resolution SLIDE-BAR to 1920 by 1080.

Windows ME/2000

For Windows ME/2000:

1 Click S TAR T.

2 Click SETTINGS.

3 Click CONTROL PANEL.

4 Double click DISPLAY.

5 Click SETTINGS.

6 Set the resolution SLIDE-BAR to 1920 by 1080

.

16

Windows 8

For Windows 8:

1. Right click and click All apps at the bottom-right of the screen.

2. Set the “View by” to “Category”.

3. Click Appearance and Personalization.

17

Click DISPLAY.

4. SettheresolutionSLIDE-BARtoOptimalpresetresolution

18

Hotkeys

1

ECO(DCR)/-

2 Volume/+

3 Source/Auto/Exit

4 Menu/Enter

5 Power

Power

Press the Power button to turn on/off the monitor.

Volume/+

When there is no OSD,Press Volume button to active volume adjustment bar,Press - or + to adjust volume.(Only for

the models with speakers)

Auto/Exit

When there is no OSD, press Auto/Source button continuously about 3 second to do auto configure.

Source hot key

When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously

to select the input source showed in the message bar , press Menu/Enter button to change to the source selected.

Eco (DCR)/ -

Press the E

co key continuously to select the Eco mode of brightness and DCR on when there is no OSD. ( Eco

mode hot key may not be available in all models).

19

OSD Setting

Basic and simple instruction on the control keys.

1) Press the MENU-button to activate the OSD window.

2) Press - or + to navigate through the functions. Once the desired function is highlighted, press the MENU-button

to activate it . press - or + to navigate through the sub-menu functions. Once the desired function is highlighted,

press MENU-button to activate it.

3) Press - or + to change the settings of the selected function. Press AUTO to exit. If you want to adjust any other

function, repeat steps 2-3.

4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press

power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is

off and then press power button to turn the monitor on.

Notes:

1) If the product has only one signal input, the item of "Input Select" is disable to adjust.

2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to

adjust.

3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.

20

Page is loading ...

AOC e2752She User manual

AOC e2752She User manual

Related papers

Other documents