Sharkoon VAYA VALUE WHITE Datasheet

Brand: Sharkoon

Model: VAYA VALUE WHITE

Category: Computer cases

Type: Datasheet

This manual is also suitable for

Vaya Value

Sharkoon VAYA VALUE WHITE is a premium quality ATX case designed to accommodate a wide range of computer components, including ATX motherboards, graphics cards, storage drives, and cooling systems. With its sleek design and ample expansion options, the VAYA VALUE WHITE is an excellent choice for building a powerful and versatile gaming or workstation PC.

The case features a spacious interior with four 5.25-inch drive bays and four 3.5-inch drive bays, providing ample storage capacity for your data and media. It also includes a 3.5-inch external mounting bay, giving you easy access to your most frequently used devices. The VAYA VALUE WHITE supports up to seven add-on cards, allowing you to expand the functionality of your system with additional graphics cards, sound cards, or other peripherals.

www.sharkoon.com

Manual

VaYa VaLUE

Table of contents page

1. Features 1

2. Package contents 2

3. The case at a glance 3

4. Mounting a mainboard 6

5. Mounting a power supply 8

6. Mounting a hard disk drive 9

7. Mounting an optical drive 10

8. Mounting a 3.5" device 12

9. Mounting an add-on card 13

10. Mounting additional fans / optimized airﬂow 13

Dear customer!

Congratulations for purchasing this premium quality SHARKOON product. For a long life time and to take full

advantage of this product we recommend you to read this manual completely.

Enjoy our product!

SHARKOON Technologies

VALUE

VaYa VaLUE

1. Features

 • ATXcase

 • 4x5.25"drivebays

 • 4x3.5"baysforHDDs(internal)

 • 1x3.5"mountingbay(external)

 • Front-I/O:

  1xUSB3.0,1xUSB2.0and2xaudio

• Blackinteriorpainting

 • 7slotsforadd-oncards

 • Plasticfrontpanelwithmeshairinlet

 • QuickfastenersforopticaldrivesandHDDs,mainboardmountingpanelwithinstallation

opening for coolers

 • 2openingsforwatercooling

 • Cablemanagementsystem

 • Fanconguration:

 • Dimensions:465x185x440mm(LxWxH)

 • Weight:~5kg

Casefront 1x120mmLEDfan

(red/pre-installed)

Sidepanel Acryl

Rear panel 1x80mm,92mmor

120mmfan(optional)



VaYa VaLUE

2. Package contents

 • ATXcase“Vaya”

 • Accessorykit

9xstand-offsformainboard 25xscrewsformainboardand

drivemounting(3.5"and5.25")

4xscrewsforPSUmounting

16xscrewsforHDDmounting 1xlockattachmentand

corresponding screw

Note:

If you are missing any of the items listed above, please contact our customer service immediately:

suppor[email protected] (Germany and Europe)

suppor[email protected] (international).



VaYa VaLUE

3. The case at a glance

ba a

A–5.25"mountingbays

B–3,5"mountingbay

C–FrontI/Owith:

 a–1xUSB3.0,1xUSB2.0 and

 b–2xaudioconnectors

D–behindtheMeshpanel:120mmLEDfan(pre-installed)

E–PowerbuttonandLED

F–ResetbuttonandLED

Front view

Sideview(left)

A–Acylicsidepanel



VaYa VaLUE

 Sideview(opened/left)

A–Mountingbaysfor5.25"devices

B–Mainboardmountingpanel

  featuring:

a–InstallationopeningforCPU

coolers and

b–Cablemanagementsystem

C–Quickfastenersforopticaldrives

D–Quickfastenersforharddisk

drives

Rear view

A–OpeningforI/Oshield

B–Openingsforwatercooling

C–Fanbracket(80,92or120mm)

D–Slotbezels

E–PSUbracket

F–Thumbscrews



VaYa VaLUE

 Viewfrombelow

A A

A–Casefeet

B–Airinletforpowersupply

Connectorsfor:

A–HDD-LED

B–ResetSwitch

C–PowerSwitch

D–PowerLED+

E–PowerLED–

F–USBconnectoroftheUSBfronthub

G–Audioconnectors(HDAudioandAC’97)

The internal cables and connectors

Note:

For further information on how to install the intended devices, refer to their respective user

documentation.



VaYa VaLUE

4. Mounting a mainboard

 1. Removethethumbscrewsonthecase’srearsideandtaketheleftsidepaneloffthecase.

  Laydownthecasesidewiseonanevensurface.

 2.Themountingpanelofthemainboardprovidesvariousdrillingsforstand-offs(g.1).

  g.1

  Themainboardcontainsspecialscrewopenings(g.2).

  g.2

Place the mainboard onto the mounting panel. You have to screw a stand-off into every drilling of the

  mountingpanelyoucanseethroughthemainboard’sscrewopenings.



VaYa VaLUE

3. Remove the mainboard and screw the stand-offs into the respective drillings of the mounting panel

  (g.3).

  g.3

  (Stand-offs)

 4.PresstheI/Oshield(deliveredwiththemainboard)intotheI/Oshieldopeninginthecase’srearpanel.

5. Place the mainboard back onto the stand-offs and attach it to the mainboard using the screws for

  mainboardmounting(g.4).

  (Screwsformainboardmounting)

  g.4

 6.Connectthecase'sfrontI/Ocablestotherespectiveconnectorsofthemainboard(alsorefertoyour

  mainboard’smanualforfurtherinformation).



VaYa VaLUE

5. Mounting a power supply

 1. SetupthecaseinfrontofyouandputthePSUagainstthePSUbracketonthecase’srearsidefromthe

  inside(g.5).

  g.5

2.AttachthePSUtothecasefromtheoutsideusingtheincludedscrewsforPSUmounting(g.6).

  g.6

   (ScrewsforPSUmounting)



VaYa VaLUE

6. Mounting a hard disk drive

1. Take the right side panel off the case.

 2.RemovethequickfastenersfrombothsidesoftheHDDmountingbayinwhichyouwanttoinstallthe

  harddiskdrive(g.7).

  g.7

 3.SlidetheHDD(itsconnectorfacingbackwards,itslabelfacingtothetop)intothecase'sHDDmounting

  bayfromtheinside(g.8).

  g.8

 4.AttachtheHDDfrombothsidesusingtherespectivequickfasteners(g.9).

  g.9

Note:

If you want to transport the case we recommend securing (additionally) the installed drives using the

respective mounting screws:

  g.10

 5.ConnecttheHDDtothePSUandthemainboard.

  (ScrewsforHDDmounting)



VaYa VaLUE

7. Mounting an optical drive

1. Reach into the case and press the 5.25" front bezel of the mounting bay in which you want to install the

  driveoutofthecase'sfrontpanel(g.11).Removethequickfastenersfrombothsidesofthemounting

  bay(g.12).

  g.11

  g.12

  (Incasethereisametalbezelcoveringthemountingbay,removeitbyusingagripper.)

 3. Slidetheopticaldriveintothemountingbayfromthefrontuntilthedriveisushwiththefrontpanel

  (g.13).

  g.13



VaYa VaLUE

 4.AttachtheHDDfrombothsidesusingtherespectivequickfasteners(g.14).

  g.14

  (Screwsfordrivemounting)

Note:

If you want to transport the case we recommend securing (additionally) the installed drives using the

respective mounting screws (ﬁg. 15).

  g.15

 5.ConnecttheopticaldrivetothePSUandthemainboard.(Replacethesidepanelstothecase.)



VaYa VaLUE

8. Mounting a 3.5" device

  (Takebothsidepanelsoffthecase.)

 1. Reachintothecaseandpressthe3.5"frontbezelofthe3.5"mountingbayoutofthecase'sfrontpanel

  (g.15).Removethequickfastenersfrombothsidesofthemountingbay(g.16).

  g.16

 2.Slidethe3.5"deviceintothemountingbayfromthefrontuntilthedeviceisushwiththefrontpanel

  (g.17).

  g.17

 3. Attachtheinstalleddevicetothecasefrombothsidesusingtheincludedmountingscrews(g.18).

  g.18

  (Scewsfordrivemounting)

 4.Connectthe3.5"deviceasdescribedinitsuserdocumentation.(Replacethesidepanelstothecase.)



VaYa VaLUE

9. Mounting an add-on card

  (Taketheleftsidepaneloffthecase.)

1. Remove the metal bezel covering the add-on card slot bay by using a gripper.

 2.Inserttheadd-oncardintotherespectivemainboardslotandre-attachitusingthexationscrew.

10. Mounting additional fans / optimized airﬂow

 1. Holdthefanagainsttherespectivebracketfromtheinside(e.g.inthesidepanel).

 2.Attachthefantothefanbracketusingthecorrespondingmountingscrews.

Note:

During fan mounting make sure that (cool) air is taken in on the case’s front side/bottom and blown

out on its back side/top. The PC components with the highest heat development should be placed

directly within this airﬂow.

Legal disclaimer:

AsacontinuingpolicyofproductimprovementatSHARKOON,thedesignandspecicationsaresubject

  tochangewithoutpriornotice.Nationalproductspecicationsmayvary.

  Allrightsreservedespecially(alsoinextracts)fortranslation,reprinting,reproductionbycopyingor

  othertechnicalmeans.Infringementswillleadtocompensation.

  Allrightsreservedespeciallyincaseofassignationofpatentorutilitypatent.Meansofdeliveryand

  technicalmodicationsreserved.

  Disposalofyouroldproduct:

  Yourproductisdesignedandmanufacturedwithhighqualitymaterialsandcomponents,whichcan

be recycled and reused.

  Whenthiscrossed-outwheeledbinsymbolisattachedtoaproduct,itmeanstheproductiscoveredby

  theEuropeanDirective2002/96/EC.

Please be informed about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal

household waste. The correct disposal of your old product will help prevent potential negative

consequences to the environment and human health.

www.sharkoon.com



Sharkoon VAYA VALUE WHITE Datasheet

Brand: Sharkoon

Model: VAYA VALUE WHITE

Category: Computer cases

Type: Datasheet

This manual is also suitable for

Vaya Value

Download PDF

report

Sharkoon VAYA VALUE WHITE Datasheet

This manual is also suitable for

Sharkoon VAYA VALUE WHITE Datasheet

Related papers

Other documents