OUTDOOR LIVING
Distributed By:
World Factory, Inc.®
Southlake, TX
1-888-422-7800
© 2002 World Factory, Inc.®
Limited Warranty
World Factory, Inc.® Products for Home Use
World Factory, Inc.® (Seller) warrants to the original Buyer only, that each Astonica™ Product will be free
from defects in material and workmanship for a period of one (1) year from date of purchase. SELLER’S
SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL
BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN
MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN
MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR
ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE, NEGLECT
OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This warranty does not apply to
damage, heat-induced coloration changes, scratching or alteration due to normal use or weathering. To
make a claim under this Limited Warranty, you must return the complete product, transportation prepaid, to
any World Factory, Inc.® authorized service center. Call 1-888-422-7800 for the location of the nearest
authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR
FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS,
ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such provision
shall not affect any other provision herein, this Limited Warranty shall be construed as if such invalid and/or
unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all prior
agreements, arrangements, or understandings between the parties relating to product warranty.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-422-7800.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-422-7800.
Tosca Serving Bar
Assembly Instructions
MODEL NO: 50105036, 50105073
precautions
Read the instructions and before use of this product.
Please keep this instruction manual for future reference
ASSEMBLY INSTRUCTIONS
1. (See Figure 1) Lay the table top (A) face down on
a flat non-scratch surface. Position support bar (E)
between holes in table top and secure with
screws (J).
2. (See Figure 2) Position leg (B) between holes in
the narrow end of table top (A) so that the arrows
on the leg and table top point in the same
direction and secure with screws (J).
3. (See Figure 3) Attach leg (C) to the table top by
pushing one end then the other into the clamps
located under the wide end of table top (A). Mare
sure the arrows on the leg and table top point in
the same direction. Secure to table top center
brace with screw (J).
Figure 1
Figure 2
Figure 3
4. (See Figure 4) Connect leg (D) to leg (C) with
screws (K). Tighten all fasteners and, with the
help of another person, carefully turn the bar
upright.
5. (See Figure 5) Attach foot rest bar (G) to legs (B),
(C) and (D) with screws (K).
6. (See Figure 6) Maneuver one of the mesh
shelves (F) between the vertical bars of legs (B),
(C) and (D), angle upwards, and lay it flat across
the lower horizontal bars. Align holes, and secure
shelf to legs with screws (L), washers (N) and
nuts (M). Repeat this process for the upper shelf.
7. (See Figure 6) Attach bottom fabric bar (I) to legs
between foot rest and mesh screen and secure
by pushing it into plastic clamps on legs (C) and
(D). Secure the ends of fabric bar (I) to legs (B)
and (C) with screws (K).
Figure 4
Figure 5
Figure 6
8. (See Figure 7) Slip the fabric skirt (S) over the
top fabric bar (H) so that the arrows on the bar
and skirt point in the same direction. Attach the
top fabric bar with skirt to legs by pushing it into
plastic clamps on legs (C) and (D). Secure the
ends of fabric bar (H) to legs (B) and (C) with
screws (K).
9. Secure bottom of fabric skirt (S) to bar (I) by
wrapping fabric around bar and securing with
attached hook and loop strips.
10. Tighten all fasteners and insert screw covers (O)
in screw heads, and nut covers (P) on hex nuts.
11.(See Figure 8) Position bar table in the desired
location and level legs, as necessary, with
adjustable levelers.
Figure 7
Figure 8
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-422-7800.
Carefully remove the contents from the package. If any parts are missing do not attempt to use the product
until they have been obtained and correctly installed.
Caution: Do not over tighten fasteners.
A
C
D
F
E
H
G
I
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A Glass Table Top
B Leg B
C Leg C
D Leg D
E Support Bar
F Mesh Shelf
Foot Rest
Fabric Bar Bottom
G
I
J
Short Screws
K
Medium Screws
L
Long Screws
N
Washer
O
M
Hex Nut
Screw Cover
P
Hex Nut Cover
Q
Allen Wrench
R
Open Wrench
S
Fabric Skirt
Fabric Bar Top
H
B
J
K
L
M
N
O
P
Q
R
S
1
1
1
1
1
2
1
1
5
10
8
8
8
24
8
2
2
1
1
S
H
1
4
ASSEMBLY INSTRUCTIONS
1. (See Figure 1) Lay the table top (A) face down on
a flat non-scratch surface. Position support bar (E)
between holes in table top and secure with
screws (J).
2. (See Figure 2) Position leg (B) between holes in
the narrow end of table top (A) so that the arrows
on the leg and table top point in the same
direction and secure with screws (J).
3.(See Figure 3) Attach leg (C) to the table top by
pushing one end then the other into the clamps
located under the wide end of table top (A). Make
sure the arrows on the leg and table top point in
the same direction. Secure to table top center
brace with screw (J).
Figure 1
Figure 2
Figure 3
4. (See Figure 4) Connect leg (D) to leg (C) with
screws (K). Tighten all fasteners and with the
help of another person, carefully turn the bar
upright.
5. (See Figure 5) Attach foot rest bar (G) to legs (B),
(C) and (D) with screws (K).
6. (See Figure 6) Maneuver one of the mesh
shelves (F) between the vertical bars of legs (B),
(C) and (D), angle upwards, and lay it flat across
the lower horizontal bars. Align holes, and secure
shelf to legs with screws (L), washers (N) and
nuts (M). Repeat this process for the upper shelf.
7. (See Figure 6) Attach bottom fabric bar (I) to legs
between foot rest and mesh screen and secure
by pushing it into plastic clamps on legs (C) and
(D). Secure the ends of fabric bar (I) to legs (B)
and (C) with screws (K).
Figure 4
Figure 5
Figure 6
8. (See Figure 7) Slip the fabric skirt (S) over the
top fabric bar (H) so that the arrows on the bar
and skirt point in the same direction. Attach the
top fabric bar with skirt to legs by pushing it into
plastic clamps on legs (C) and (D). Secure the
ends of fabric bar (H) to legs (B) and (C) with
screws (K).
9. Secure bottom of fabric skirt (S) to bar (I) by
wrapping fabric around bar and securing with
attached hook and loop strips.
10. Tighten all fasteners and insert screw covers (O)
in screw heads, and nut covers (P) on hex nuts.
11.(See Figure 8) Position bar table in the desired
location and level legs, as necessary, with
adjustable levelers.
Figure 7
Figure 8
J
J
E
A
B
J
J
A
J
D
C
K
K
C
D
K
G
K
C
K
F
I
A
2
3
-
1
-
2
-
3
Astonica 50105073 Assembly Instructions
- Type
- Assembly Instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Astonica 50100025 User manual
-
-
-
-
-
-
-
-
-