5019 419 66007
FGH 5400
PRODUCT DESCRIPTION SHEET
NL
OPERATION OF BURNERS
To light one of the burners:
Press the relative knob and turn it anti-
clockwise to the desired setting .
At the same time, keeping the knob
pressed, approach a flame to the burner.
- After ignition of the of the burner,
release the knob.
If the burner does not ignite, repeat
the operations described above.
Note:
-
Should particular local conditions of the
delivered gas make the ignition of the
burner difficult, it is advisable to repeat the
operation with the knob turned to the small
flame setting .
1.
Removable panstand grids
2.
Medium burner
3.
Large burner
4.
Simmer burner
5.
Medium burner
6.
Medium burner control knob
7.
Large burner control knob
8.
Simmer burner control knob
9.
Medium burner control knob
Symbols
Shaded
circle
Tap closed
Large
flame
and star
Maximum opening/
delivery
Small
flame
Minimum opening or
reduced delivery
4gb66007.fm5 Page 1 Thursday, January 24, 2002 5:07 PM