Silvercrest SFA 40 A2 Operating Instructions Manual

Brand: Silvercrest

Model: SFA 40 A2

Type: Operating Instructions Manual

HANDS-FREE SYSTEM SFA 40 A2

IAN 285668

HANDS-FREE SYSTEM

Operating instructions

HANDSFREE-SET

Gebruiksaanwijzing

FREISPRECHANLAGE

Bedienungsanleitung

GB / IE / NI Operating instructions Page 1

NL / BE Gebruiksaanwijzing Pagina 29

DE / AT / CH Bedienungsanleitung Seite 57

Before reading, unfold the page containing the illustrations and familiarise

yourself with all functions of the device.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u

vertrouwd met alle functies van het apparaat.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen

Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

SFA 40 A2

│

1 ■

Contents

Introduction .................................. 3

Information about these operating instructions ................3

Notes on trademarks ...................................3

Intended use ..........................................3

Warnings used ........................................4

Safety ....................................... 5

Basic safety instructions .................................5

Notes on the radio interface .............................7

Notes on batteries and rechargeable batteries ...............8

Description of components ..................... 9

Operation .................................. 10

Check package contents ...............................10

Disposal of the packaging ..............................10

Inserting the Li-ion battery ...............................11

Charging the Li-ion battery ..............................11

Handling and use ............................ 12

Switching the hands-free set on and oﬀ ....................12

Pairing the hands-free set with a compatible mobile phone .....13

Auto power function ...................................14

Multipoint function ....................................15

Activating/deactivating the multipoint function ..............16

Call function .........................................16

Accepting/ending a call ...............................17

Handing over a call between hands-free set and mobile phone . 17

Manage calls ........................................17

Automatic call answering ...............................18

Rejecting a call .......................................18

Setting the volume ....................................18

Muting the microphone ................................19

Resetting the hands-free set .............................19

SFA 40 A2

■ 2

│

Music playback ......................................19

Attachment to the sun visor ..............................20

Troubleshooting ............................. 20

Changing the fuse in the car charger adapter ..............22

Cleaning .................................... 23

Storage when not in use ....................... 23

Disposal ....................................24

Disposal of the device .................................24

Disposal of batteries ...................................24

Appendix ................................... 25

Technical details ......................................25

Notes on the EU Declaration of Conformity .................26

Kompernass Handels GmbH warranty ....................26

Service .............................................28

Importer ............................................28

SFA 40 A2

│

3 ■

Introduction

Information about these operating instructions

Congratulations on the purchase of your new device.

You have selected a high-quality product. The operating instructions

are part of this product. They contain important information about

safety, usage and disposal. Before using the product, please familiarise

yourself with all operating and safety instructions. Use the product

only as described and for the range of applications speciﬁed. Keep

these operating instructions as a reference and store them near the

product.

Please also pass these operating instructions on to any future owner.

Notes on trademarks

- The Bluetooth

logotype and Bluetooth

logo are registered

trademarks of Bluetooth SIG, Inc. (Special Interest Group). Any use

of the trademarks by Kompernaß Handels GmbH is made under

the provisions of a licence.

- USB

is a registered trademark of USB Implementers Forum, Inc.

All other names and products may be trademarks or registered

trademarks of their respective owners.

Intended use

The Bluetooth

hand-free set SFA 40 A2 is an information tech-

nology device for use in vehicles with an on-board power supply of

12–24V. This device is intended to establish a hands-free connec-

tion to a mobile phone via Bluetooth

to enable hands-free phone

calls while driving without the need to hold the mobile telephone to

your ear. This device may only be used for private domestic purposes,

it is not suitable for industrial or commercial applications.

SFA 40 A2

■ 4

│

The device is not intended for any other purpose, nor for use beyond

the scope described. The manufacturer accepts no responsibility for

damage caused by failure to observe these instructions, improper

use or repairs, unauthorised modiﬁcations or the use of unapproved

replacement parts. The risk shall be borne solely by the user.

Warnings used

The following types of warning are used in these operating instruc-

tions:

DANGER

A warning at this hazard level indicates a poten-

tially hazardous situation.

Failure to avoid this hazardous situation could result in severe

injuries or even death.

► Follow the instructions in this warning notice to avoid the risk

of serious injuries or death.

CAUTION

A warning notice at this hazard level indicates a

risk of material damage.

Failure to avoid this situation could result in material damage.

► Follow the instructions in this warning notice to prevent material

damage.

NOTE

► A note provides additional information that will assist you in

using the device.

SFA 40 A2

│

5 ■

Safety

This section contains important safety instructions for using the

product. Improper use may result in personal injury and property

damage.

Basic safety instructions

To ensure safe operation of the product, follow the safety guidelines

set out below:

Ŷ This device may be used by children aged 8 years and above

and by persons with limited physical, sensory or mental capabili-

ties, or lack of experience and knowledge, provided that they are

under supervision or have been told how to use the device safely

and are aware of the potential risks. Children must not play with

the device. Cleaning and maintenance tasks may not be carried

out by children unless they are supervised.

DANGER! Do not allow children to play with the packaging

material! Keep all packaging materials away from children. There

is a risk of suﬀocation!

Ŷ Check the device for visible external damage before use. Do not

operate a device that has been damaged or dropped.

Ŷ If you notice smoke, unusual noises or smells, disconnect the

device from the power supply and remove the battery from the

hands-free set. Have the device checked by a qualiﬁed specialist

before using it again.

Ŷ Never open the housing of the device. None of the components

in the device can be serviced or replaced by the user.

Ŷ Do not make any unauthorised modiﬁcations or alterations to the

device.

Ŷ All repairs must be carried out by authorised specialist companies

or by the Customer Service department. Improper repairs may

put the user at risk. It will also invalidate any warranty claims.

SFA 40 A2

■ 6

│

Ŷ Repairs to the device during the warranty period may only be

carried out by a customer service department authorised by the

manufacturer. Otherwise, no warranty claims will be held for any

subsequent damages.

Ŷ Defective components must always be replaced with original

replacement parts. Compliance with the safety requirements can

only be guaranteed by using these replacement parts.

Ŷ Never operate the device in the vicinity of naked ﬂames (e.g.

candles), and do not place burning candles on or next to the

device. This will help to prevent ﬁres.

Ŷ Do not expose the device to water spray or dripping water, and

do not place liquid-ﬁlled objects such as vases or open drinks

containers on or near the device.

Ŷ Never subject the device to extreme heat or humidity. This par-

ticularly applies to storage in a car. If the car is at a standstill for

longer periods and the weather is warm with solar irradiation,

high temperatures occur in the car interior and the glove compart-

ment. Remove electrical and electronic devices from the vehicle.

Ŷ Always unplug the car charger adapter by pulling on the plug –

do not pull the cable itself.

Ŷ Do not place any items of furniture or other heavy objects on the

cable and ensure that it cannot become bent.

Ŷ The cable must be routed so it does not interere with the opera-

tion of the vehicle. The cable may not be routed in the deployment

area of the airbag, otherwise this could cause serious injuries if the

airbag is triggered.

Ŷ Do not use any adapter or extension cable to connect the car

charger adapter to the power supply.

ATTENTION! Comply with all local laws. Your hands must

always be free to operate the vehicle safely when you are driv-

ing. Traﬃc safety must always take priority whilst driving.

SFA 40 A2

│

7 ■

Ŷ Only operate the hands-free set on those occasions in which the

traﬃc situation permits it and in which you will not endanger,

injure, obstruct or cause annoyance to other road users. Therefore

you should only operate the hands-free set in a stationary vehicle.

Ŷ Do not allow yourself to be distracted from the traﬃc situation by

operating the hands-free set or reading its display. Before starting

your journey, familiarise yourself with how to use the device and

practice how to use it safely.

Ŷ Always position the hands-free set in your vehicle so that it does

not obstruct your view and is not mounted in a personal impact

zone or the deployment area of the airbag. Read the instruction

manual of the vehicle manufacturer.

Ŷ Always position the hands-free set in your vehicle so that it does

not interfere with your operation of the vehicle, ideally on the sun

visor.

Notes on the radio interface

Ŷ Keep the device at least 20 cm away from a pacemaker, as the

proper functioning of the pacemaker could be aﬀected by radio

waves.

Ŷ The transmitted radio waves can cause noise interference in hearing

aids.

Ŷ Do not use the device with the radio components switched on

in the presence of ﬂammable gases or in a potentially explosive

atmosphere (e.g. in a paint shop), as the transmitted radio waves

can cause an explosion or ignite a ﬁre.

Ŷ The range of the radio waves is dependent on the environment

and the ambient conditions.

Ŷ Data transmissions via a wireless connection can be intercepted

by unauthorised third parties.

SFA 40 A2

■ 8

│

Notes on batteries and rechargeable batteries

DANGER

Mishandling batteries can cause ﬁres, explosions,

leakages or other hazards!

► The hands-free set may only be used with a Li-ion battery, type

BL-5B. Otherwise, there is a risk of ﬁre and/or explosion!

► Keep batteries out of the hands of children.

► Do not leave batteries lying around. There is a risk of them

being swallowed by children or pets. If this happens, consult a

doctor immediately!

► Never short-circuit, dismantle, deform or reverse the polarity

of batteries, and never throw them into a ﬁre. There is a risk of

explosion!

► Leaking or damaged batteries can cause skin irritations when

touched. Therefore, use suitable protective gloves. If the

product comes in contact with your skin, rinse with plenty of

water. If the chemicals come into contact with your eyes, rinse

thoroughly with plenty of water, do not rub and consult a doc-

tor immediately.

► During extended periods of non-use (e.g. during storage),

remove the battery from the hands-free set to prevent damage

caused by battery leakage.

SFA 40 A2

│

9 ■

Description of components

(See fold-out page for illustrations)

Loudspeaker

Mute button

Button

Multi-function button

Microphone

Operating LED

Micro USB connection

Battery compartment

Recess for mounting clip

Mounting clip

Li-ion battery BL-5B

Car charger adapter

Operating LED

SFA 40 A2

■ 10

│

Operation

Check package contents

(See fold-out page for illustrations)

The product includes the following components:

Ɣ Hands-Free System SFA 40 A2

Ɣ Mounting clip

Ɣ Li-ion-rechargeable battery BL-5B

Ɣ Car charger adapter

Ɣ These operating instructions (not shown)

♦ Unpack all parts of the device from the packaging and remove

all packaging materials.

NOTE

► Check the package for completeness and signs of visible

damage.

► If the delivery is incomplete or damage has occurred as a

result of defective packaging or during transport, contact the

Service hotline (see section "Service").

Disposal of the packaging

The packaging protects the device from damage during transport.

The packaging materials have been selected for their environmental

friendliness and ease of disposal, and are therefore recyclable.

Returning the packaging to the material cycle conserves

raw materials and reduces the amount of waste that is

generated. Dispose of packaging materials that are no

longer needed in accordance with applicable local

regulations.

SFA 40 A2

│

11 ■

Inserting the Li-ion battery

♦ Open the battery compartment by pressing on the battery

compartment cover and pushing it in the direction of the em-

bossed arrow.

♦ Insert the Li-ion battery

into the battery compartment . En-

sure that the three contacts of the battery lie in the same corner

as the three pins in the battery compartment

. The type plate of

the rechargeable batteries should be facing upwards. The struc-

ture of the battery will not allow it to be inserted any other way.

♦ After inserting the battery, close the battery compartment

with the battery compartment cover.

Charging the Li-ion battery

Before ﬁrst use, the Li-ion battery must be fully charged.

♦ Connect the micro USB plug of the supplied car charger adapter

to the micro USB charger connection of the hands-free set.

♦ Plug the car charger adapter into a suitable socket in your ve-

hicle. The operating LED

lights up orange during charging.

Once charging is completed (around 3 hours), the operating

LED goes out.

♦ Unplug the car charger adapter from the vehicle socket and the

hands-free set.

NOTE

► If the operating LED

starts ﬂashing orange every 10

seconds and there is a series of beeps every 5 minutes, the

battery charge level is low and the battery needs charging.

SFA 40 A2

■ 12

│

CAUTION

► Only charge the battery in the hands-free set, as the cor-

responding charging electronics are built into the device.

► Charge the battery only when the motor is running to pre-

serve your car battery.

► Do not charge the battery while the hands-free set is attached

to the sun visor as the connecting cable may interfere with the

operation of the vehicle.

► Alternatively, the battery can be charged on a PC or an exter-

nal mains adapter. You will need a connecting cable with a

suitable USB connection.

Handling and use

This section provides you with important information on handling and

using the device.

Switching the hands-free set on and oﬀ

♦ Press the multifunction button for about 3 seconds

until you hear a high-pitched beep and the operating LED

lights up blue. The hands-free set is now in standby mode. The

operating LED now ﬂashes blue every 6 seconds.

NOTE

► If no mobile phone is paired with the hands-free set, it

switches after a short time into pairing mode.

♦ Press the multifunction button

again for about 5

seconds to switch oﬀ the hands-free set. You will hear a low

beep and the operating LED lights up brieﬂy orange before go-

ing out completely. The hands-free set is now switched oﬀ.

SFA 40 A2

│

13 ■

Pairing the hands-free set with a compatible

mobile phone

Before you can use the hands-free set, you must pair it with a com-

patible mobile telephone.

♦ With the hands-free set switched oﬀ, press the multifunction

button

for about 6 seconds until you hear a ris-

ing series of beeps and the operating LED ﬂashes alternately

blue and orange. The hands-free set is now in pairing mode for

about 2 minutes.

If the pairing does not happen within this time, you will here two

low beeps and the hands-free set switches oﬀ.

♦ Set the mobile telephone so that it scans for Bluetooth

de-

vices. A detailed description of how to do this is to be found in

the operating instructions for your mobile telephone.

♦ Select the entry SFA 40 A2 from the list of found devices in

your mobile phone to pair the two devices. The name of the

hands-free set SFA 40 A2 now appears on the list of paired

devices on your mobile phone.

NOTE

► If you are asked to enter a PIN during pairing, enter 0000.

► If the pairing is successful, you will hear a short beep.

♦ The hands-free set is now in standby mode and the operating

LED

ﬂashes blue every 10 seconds. If the connection to the

mobile phone is lost, the operating LED ﬂashes brieﬂy blue

every 10 seconds.

SFA 40 A2

■ 14

│

Auto power function

The auto power function enables you to set the device so that it

switches back on automatically and connects to a known mobile

phone as soon as the built-in vibration sensor is activated.

If the device has lost its connection to a mobile phone, e.g. due to

excessive distance, and it has not been restored within 10 minutes,

it will switch to auto power function (if this has been previously acti-

vated). If there is a vibration, e.g. caused by opening the car door,

the device switches back on and auto matically attempts to connect

to known mobile phones for about 2 minutes. If there is no known

mobile phone in range, the device switches back to auto power func-

tion. The auto power function also works if you have switched the

device oﬀ manually.

NOTE

► It is however possible that the automatic connection cannot be

made depending on the mobile phone used. If this happens, press

the multifunction button

to restore the connection.

► With some mobile phones, the connection must also be

conﬁrmed on the mobile phone itself. Please also refer to the

operating instructions for the respective mobile phone.

► You can only switch on the auto power function if the hands-

free set is not in pairing mode.

► If you do not have your phone with you during your journey,

we recommend switching oﬀ the auto power function. In this

way you can prevent the device from switching itself on and oﬀ

due to vehicle movements.

♦ Press and hold the mute button

for about 2 seconds to

turn on the auto power function. The operating LED

brieﬂy

lights up green.

SFA 40 A2

│

15 ■

♦ Press and hold the mute button again for about 2 sec-

onds to turn oﬀ the auto power function. The operating LED

lights up brieﬂy green three times.

Multipoint function

The multipoint function allows you to use the hands-free set with two

mobile phones simultaneously. This is useful for users with a private

and a business mobile phone.

♦ The pairing of additional mobile phones is carried out in the

same manner as described in the section “Pairing the hands-

free set with a compatible mobile phone”. Start the pairing

process for each phone with the hands-free set switched oﬀ.

If you have paired several mobile phones, the hands-free set will now

have several “known” devices available. This status is a prerequisite

for an active connection between the hands-free set and other

mobile phones. A maximum of 8 mobile phones can be saved as

“known” devices. The number of devices that can be actively linked

to the hands-free set is limited to two.

As soon as one or two of the known devices come into range of the

hands-free set, the connection to the devices is made automatically.

In some cases, you must conﬁrm the connection manually on your

mobile phone. If a third “known” device comes into range of the

hands-free set, the connection to this device will remain blocked until

one of the two active connections is broken or one of the two devices

leaves the transmission range. If the connection of one of the paired

devices is broken, the link becomes free for the third (waiting) device.

If two mobile phones are linked to the hands-free set, diﬀerent ring

tones are used for incoming calls.

SFA 40 A2

■ 16

│

Activating/deactivating the multipoint function

The multipoint function is activated by default on delivery.

To disable the multipoint function:

♦ In standby mode, press the

button for approx. 3 seconds.

The operating LED lights

up brieﬂy orange before going

out completely. You will hear a low beep, followed by a series

of beeps decreasing in pitch. The hands-free set switches oﬀ

and multiple mobile phones can no longer be paired with the

device.

To enable the multipoint function:

♦ In standby mode, press the

button for approx. 3 seconds.

You will hear a rising series of beeps. The hands-free set can

now be paired with several mobile phones.

NOTE

► With some mobile phones, it is possible that the hands-free set

must be restarted if several mobile phones are connected.

Call function

♦ Use your mobile phone to make a call in the usual way.

♦ To redial the last used number, press the multifunction button

twice in quick succession.

♦ To activate voice dialling, press the multifunction button

once brieﬂy.

NOTE

► Voice dialling is only available with mobile phones that support

this function. For more information on voice dialling, refer to the

instruction manual of your mobile phone.

SFA 40 A2

│

17 ■

Accepting/ending a call

When there is an incoming call, the operating LED ﬂashes blue

every 3 seconds and you can hear a ring tone over the hands-free

set. Even if the call tone is switched oﬀ on your mobile phone, you

will still hear the ring tone via the hands-free set.

♦ Press the multifunction button

once brieﬂy to ac-

cept the call.

♦ Press the multifunction button

once brieﬂy to ﬁnish

the ongoing call.

Handing over a call between hands-free set and

mobile phone

During a call you can hand over a call between the hands-free set

and the mobile phone.

♦ Press the

button and the button simultaneously during

a call. You will hear a beep and the call will be transferred to

the mobile phone.

♦ Pressing the

button and the button again will transfer

the call back to the hands-free set.

Manage calls

If you have connected two mobile phones to the hands-free set simul-

taneously, you can put one call on hold in order to take a call from a

second mobile phone and to toggle between the two calls.

♦ Press the multifunction button

twice brieﬂy to ac-

cept the call on the second mobile phone while talking on the

ﬁrst mobile phone. The ﬁrst call is put on hold.

Page is loading ...

Silvercrest SFA 40 A2 Operating Instructions Manual

Brand: Silvercrest

Model: SFA 40 A2

Type: Operating Instructions Manual

Download PDF

report

in other languages

Deutsch: Silvercrest SFA 40 A2
Nederlands: Silvercrest SFA 40 A2

Silvercrest SFA 40 A2 Operating Instructions Manual

Silvercrest SFA 40 A2 Operating Instructions Manual

in other languages

Related papers

Other documents