HEIDENHAIN GAGE-CHEK 2000 (1248580.1.3.x) Operating instructions

Category
Network management software
Type
Operating instructions

This manual is also suitable for

GAGE-CHEK 2000
Operating Instructions
Evaluation Unit
English (en)
08/2020
Contents
Contents
1 Fundamentals..................................................................................................................................13
2 Safety............................................................................................................................................... 23
3 Transport and storage....................................................................................................................29
4 Mounting......................................................................................................................................... 35
5 Installation.......................................................................................................................................41
6 Basic operation............................................................................................................................... 51
7 Commissioning............................................................................................................................... 75
8 Setup..............................................................................................................................................119
9 Measuring......................................................................................................................................155
10 File management..........................................................................................................................169
11 Settings..........................................................................................................................................177
12 Servicing and maintenance.........................................................................................................211
13 What to do if ............................................................................................................................... 221
14 Removal and disposal..................................................................................................................225
15 Specifications................................................................................................................................227
16 Index...............................................................................................................................................233
17 List of figures................................................................................................................................235
2
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Contents
1 Fundamentals..................................................................................................................................13
1.1 Overview............................................................................................................................................... 14
1.2 Information on the product................................................................................................................ 14
1.3 Demo software for the product..........................................................................................................14
1.4 Documentation on the product..........................................................................................................15
1.4.1 Validity of the documentation..................................................................................................15
1.4.2 Notes on reading the documentation......................................................................................16
1.4.3 Storage and distribution of the documentation.......................................................................17
1.5 About these instructions.....................................................................................................................17
1.5.1 Document category................................................................................................................. 17
1.5.2 Target groups for the instructions........................................................................................... 17
1.5.3 Target groups according to user types....................................................................................18
1.5.4 Contents of the chapters.........................................................................................................18
1.5.5 Notes in this documentation................................................................................................... 20
1.5.6 Symbols and fonts used for marking text............................................................................... 21
2 Safety............................................................................................................................................... 23
2.1 Overview............................................................................................................................................... 24
2.2 General safety precautions................................................................................................................. 24
2.3 Intended use......................................................................................................................................... 24
2.4 Improper use........................................................................................................................................ 24
2.5 Personnel qualification........................................................................................................................ 25
2.6 Obligations of the operating company..............................................................................................25
2.7 General safety precautions................................................................................................................. 26
2.7.1 Symbols on the product.......................................................................................................... 26
2.7.2 Electrical safety precautions.................................................................................................... 27
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
3
Contents
3 Transport and storage....................................................................................................................29
3.1 Overview............................................................................................................................................... 30
3.2 Unpacking............................................................................................................................................. 30
3.3 Items supplied and accessories..........................................................................................................30
3.3.1 Items supplied......................................................................................................................... 30
3.3.2 Accessories..............................................................................................................................31
3.4 In case of damage in transit...............................................................................................................33
3.5 Repackaging and storage....................................................................................................................33
3.5.1 Repackaging the product......................................................................................................... 33
3.5.2 Storage of the product............................................................................................................ 33
4 Mounting......................................................................................................................................... 35
4.1 Overview............................................................................................................................................... 36
4.2 Assembly of the product.................................................................................................................... 36
4.2.1 Mounting on Single-Pos stand.................................................................................................37
4.2.2 Mounting on Duo-Pos stand....................................................................................................38
4.2.3 Mounting on Multi-Pos stand.................................................................................................. 39
4.2.4 Mounting on Multi-Pos holder................................................................................................. 40
5 Installation.......................................................................................................................................41
5.1 Overview............................................................................................................................................... 42
5.2 General information............................................................................................................................. 42
5.3 Device overview................................................................................................................................... 43
5.4 Connecting encoders........................................................................................................................... 45
5.5 Connecting touch probes.................................................................................................................... 46
5.6 Wiring switching inputs and outputs................................................................................................ 47
5.7 Connecting input devices....................................................................................................................48
5.8 Connecting a network peripheral.......................................................................................................49
5.9 Connecting the line voltage................................................................................................................49
4
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Contents
6 Basic operation............................................................................................................................... 51
6.1 Overview............................................................................................................................................... 52
6.2 Using the touchscreen and input devices.........................................................................................52
6.2.1 Touchscreen and input devices............................................................................................... 52
6.2.2 Gestures and mouse actions...................................................................................................52
6.3 General operating elements and functions.......................................................................................54
6.4 GAGE-CHEK 2000 – switch-on and switch-off.................................................................................. 56
6.4.1 Switching on the GAGE-CHEK 2000....................................................................................... 56
6.4.2 Activating and deactivating the energy saving mode.............................................................. 56
6.4.3 Switching off the GAGE-CHEK 2000........................................................................................ 57
6.5 User login and logout......................................................................................................................... 57
6.5.1 User login.................................................................................................................................58
6.5.2 User logout.............................................................................................................................. 58
6.6 Setting the language........................................................................................................................... 59
6.7 Performing the reference mark search after startup........................................................................ 59
6.8 User interface....................................................................................................................................... 60
6.8.1 User interface after switch-on................................................................................................. 60
6.8.2 Main menu of the user interface............................................................................................ 61
6.8.3 Measure menu.........................................................................................................................62
6.8.4 File management menu...........................................................................................................63
6.8.5 User login menu...................................................................................................................... 64
6.8.6 Settings menu..........................................................................................................................65
6.8.7 Switch-off menu.......................................................................................................................66
6.9 Position display.................................................................................................................................... 66
6.9.1 Operating elements of the position display............................................................................ 66
6.10 Customizing the workspace............................................................................................................... 67
6.10.1 Hiding and showing the main menu....................................................................................... 67
6.10.2 Hiding or displaying the Inspector...........................................................................................67
6.11 Using the Inspector............................................................................................................................. 67
6.11.1 Controls of the Inspector.........................................................................................................68
6.11.2 Function elements................................................................................................................... 68
6.11.3 Adjusting settings in the quick access menu..........................................................................71
6.12 Messages and audio feedback............................................................................................................71
6.12.1 Messages.................................................................................................................................71
6.12.2 Wizard...................................................................................................................................... 73
6.12.3 Audio feedback.........................................................................................................................73
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
5
Contents
7 Commissioning............................................................................................................................... 75
7.1 Overview............................................................................................................................................... 76
7.2 Logging in for commissioning............................................................................................................76
7.2.1 User login.................................................................................................................................76
7.2.2 Performing the reference mark search after startup............................................................... 77
7.2.3 Setting the language................................................................................................................77
7.2.4 Changing the password...........................................................................................................78
7.3 Steps for commissioning.................................................................................................................... 78
7.4 Basic settings....................................................................................................................................... 79
7.4.1 Activating the Software options.............................................................................................. 79
7.4.2 Setting the date and time........................................................................................................82
7.4.3 Setting the units of measure...................................................................................................82
7.5 Configuring a touch probe.................................................................................................................. 83
7.6 Configuring the axes........................................................................................................................... 83
7.6.1 Configure Alias assignment for axis names............................................................................ 84
7.6.2 Overview of typical encoders..................................................................................................85
7.6.3 Configuring axes for encoders with EnDat interface...............................................................87
7.6.4 Configuring the axes for encoders with a 1 V
PP
or 11 µA
PP
interface......................................89
7.6.5 Configuring axes for encoders with TTL interface.................................................................. 92
7.6.6 Performing error compensation............................................................................................... 94
7.6.7 Coupling axes.........................................................................................................................112
7.6.8 Activating the reference mark search....................................................................................113
7.7 OEM area............................................................................................................................................ 113
7.7.1 Adding documentation...........................................................................................................114
7.7.2 Adding a startup screen........................................................................................................ 114
7.7.3 Configuring the unit for screenshots.....................................................................................116
7.8 Backing up data................................................................................................................................. 117
7.8.1 Back up settings.................................................................................................................... 117
7.8.2 Back up user files.................................................................................................................. 118
6
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Contents
8 Setup..............................................................................................................................................119
8.1 Overview............................................................................................................................................. 120
8.2 Logging in for setup.......................................................................................................................... 120
8.2.1 User login...............................................................................................................................120
8.2.2 Performing the reference mark search after startup............................................................. 121
8.2.3 Setting the language..............................................................................................................121
8.2.4 Changing the password.........................................................................................................122
8.3 Single steps for setup....................................................................................................................... 123
8.3.1 Basic settings.........................................................................................................................124
8.3.2 Adding function elements......................................................................................................130
8.3.3 Configuring probing functions................................................................................................131
8.3.4 Configuring the MinMax function..........................................................................................132
8.3.5 Configuring the Diameter/Radius function............................................................................ 133
8.3.6 Configuring the Relative function.......................................................................................... 134
8.3.7 Configure the Mastering function......................................................................................... 134
8.3.8 Configure the Dial gage function...........................................................................................135
8.3.9 Creating a preset table.......................................................................................................... 138
8.3.10 Configuring the measured value output................................................................................141
8.4 Back up settings.................................................................................................................................152
8.5 Back up user files...............................................................................................................................153
9 Measuring......................................................................................................................................155
9.1 Overview............................................................................................................................................. 156
9.2 Conducting a measurement............................................................................................................. 156
9.2.1 Preparing a measurement..................................................................................................... 156
9.2.2 Selecting a preset..................................................................................................................158
9.2.3 Measuring lengths and angles.............................................................................................. 160
9.2.4 Measuring with a touch probe.............................................................................................. 161
9.2.5 Measuring with the probing function.................................................................................... 161
9.2.6 Acquiring the minimum, maximum, and range..................................................................... 163
9.2.7 Sending measured values to a computer..............................................................................164
9.2.8 Displaying the diameter......................................................................................................... 165
9.2.9 Performing a relative measurement...................................................................................... 166
9.2.10 Measure with dial gage......................................................................................................... 167
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
7
Contents
10 File management..........................................................................................................................169
10.1 Overview............................................................................................................................................. 170
10.2 File types.............................................................................................................................................171
10.3 Managing folders and files............................................................................................................... 171
10.4 Viewing and opening files................................................................................................................ 173
10.5 Exporting files.................................................................................................................................... 174
10.6 Importing files.................................................................................................................................... 175
8
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Contents
11 Settings..........................................................................................................................................177
11.1 Overview............................................................................................................................................. 178
11.1.1 Overview of the Settings menu............................................................................................ 179
11.2 General................................................................................................................................................ 180
11.2.1 Device information.................................................................................................................180
11.2.2 Screen.................................................................................................................................... 180
11.2.3 Display....................................................................................................................................181
11.2.4 Input devices..........................................................................................................................181
11.2.5 Sounds................................................................................................................................... 182
11.2.6 Printers................................................................................................................................... 182
11.2.7 Date and time........................................................................................................................ 182
11.2.8 Units....................................................................................................................................... 183
11.2.9 Copyrights.............................................................................................................................. 184
11.2.10 Service info............................................................................................................................ 184
11.2.11 Documentation.......................................................................................................................184
11.3 Sensors................................................................................................................................................185
11.3.1 Touch probe............................................................................................................................185
11.4 Interfaces............................................................................................................................................. 186
11.4.1 Network..................................................................................................................................186
11.4.2 Network drive........................................................................................................................ 187
11.4.3 USB........................................................................................................................................ 188
11.4.4 RS-232....................................................................................................................................188
11.4.5 Data transfer.......................................................................................................................... 189
11.4.6 Wireless LAN hotspot........................................................................................................... 190
11.4.7 Switching functions................................................................................................................190
11.4.8 Position-dependent switching functions................................................................................ 190
11.5 User......................................................................................................................................................191
11.5.1 OEM....................................................................................................................................... 191
11.5.2 Setup...................................................................................................................................... 191
11.5.3 Operator................................................................................................................................. 192
11.5.4 Adding User........................................................................................................................... 192
11.6 Axes..................................................................................................................................................... 193
11.6.1 Reference marks....................................................................................................................193
11.6.2 Information............................................................................................................................. 194
11.6.3 Error compensation................................................................................................................194
11.6.4 Nonlinear error compensation (NLEC)................................................................................... 194
11.6.5 Squareness error compensation (SEC)..................................................................................195
11.6.6 Alias assignment for axis names...........................................................................................195
11.6.7 <Axis name> (settings of the axis)....................................................................................... 196
11.6.8 Encoder.................................................................................................................................. 197
11.6.9 Reference marks (Encoder)....................................................................................................201
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
9
Contents
11.6.10 Reference point displacement............................................................................................... 202
11.6.11 Linear error compensation (LEC)...........................................................................................203
11.6.12 Segmented linear error compensation (SLEC)...................................................................... 203
11.6.13 Create table of supporting points..........................................................................................204
11.7 Service................................................................................................................................................. 205
11.7.1 Firmware information.............................................................................................................205
11.7.2 Back up and restore.............................................................................................................. 206
11.7.3 Firmware update....................................................................................................................207
11.7.4 Reset......................................................................................................................................207
11.7.5 OEM area...............................................................................................................................208
11.7.6 Startup screen........................................................................................................................208
11.7.7 Documentation.......................................................................................................................208
11.7.8 Software options....................................................................................................................209
12 Servicing and maintenance.........................................................................................................211
12.1 Overview............................................................................................................................................. 212
12.2 Cleaning...............................................................................................................................................212
12.3 Maintenance plan...............................................................................................................................213
12.4 Resuming operation...........................................................................................................................213
12.5 Updating the firmware...................................................................................................................... 214
12.6 Restoring files and settings.............................................................................................................. 216
12.6.1 Restore OEM-specific folders and files.................................................................................216
12.6.2 Restore user files.................................................................................................................. 217
12.6.3 Restore settings.....................................................................................................................218
12.7 Reset all settings................................................................................................................................219
12.8 Reset to shipping conditions............................................................................................................219
13 What to do if ............................................................................................................................... 221
13.1 Overview............................................................................................................................................. 222
13.2 System or power failure....................................................................................................................222
13.2.1 Restoring the firmware..........................................................................................................222
13.2.2 Restore settings.....................................................................................................................223
13.3 Malfunctions....................................................................................................................................... 223
13.3.1 Troubleshooting......................................................................................................................223
10
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Contents
14 Removal and disposal..................................................................................................................225
14.1 Overview............................................................................................................................................. 226
14.2 Removal...............................................................................................................................................226
14.3 Disposal............................................................................................................................................... 226
15 Specifications................................................................................................................................227
15.1 Overview............................................................................................................................................. 228
15.2 Product data....................................................................................................................................... 228
15.3 Product dimensions and mating dimensions................................................................................. 230
15.3.1 Product dimensions with Single-Pos stand........................................................................... 231
15.3.2 Product dimensions with Duo-Pos stand.............................................................................. 231
15.3.3 Product dimensions with Multi-Pos stand.............................................................................232
15.3.4 Product dimensions with Multi-Pos holder............................................................................232
16 Index...............................................................................................................................................233
17 List of figures................................................................................................................................235
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
11
1
Fundamentals
Fundamentals | Overview
1
1.1 Overview
This chapter contains information about the product and this manual.
1.2 Information on the product
Product designation ID Firmware version Index
GAGE-CHEK 2000 1089181-xx 1248580.1.3.x ---
The ID label is provided on the back of the product.
Example:
GAGE-CHEK xxxx
2
3
1
1
Product designation
2
Index
3
Part number (ID)
1.3 Demo software for the product
GAGE-CHEK 2000 Demo is software you can install on a computer regardless of
the device. GAGE-CHEK 2000 Demo helps you to become familiar with, try out or
present the functions of the device.
You can download the current version of the software here: www.heidenhain.de
To download the installation file from the HEIDENHAIN Portal, you
need access rights to the Software portal folder in the directory of the
appropriate product.
If you do not have access rights to the Portal's Software folder, you can
request the access rights from your HEIDENHAIN contact person.
14
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Fundamentals | Documentation on the product
1.4 Documentation on the product
1.4.1 Validity of the documentation
Before using the documentation and the product, you need to verify that the
documentation matches the product.
Compare the ID number and the index indicated in the documentation with the
corresponding data given on the ID label of the product
Compare the firmware version given in the documentation with the firmware
version of the product
Further information: "Device information", Page 180
If the ID numbers and indexes as well as the firmware versions match, the
documentation is valid
If the part numbers and indexes do not match so that the
documentation is not valid, you will find the current documentation for
the product at www.heidenhain.de.
1
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
15
Fundamentals | Documentation on the product
1
1.4.2 Notes on reading the documentation
WARNING
Fatal accidents, personal injury or property damage caused by non-
compliance with the documentation!
Failure to comply with the documentation may result in fatal accidents, personal
injury or property damage.
Read the documentation carefully from beginning to end
Keep the documentation for future reference
The table below lists the components of the documentation in the order of priority
for reading.
Documentation Description
Addendum An addendum supplements or supersedes
the corresponding contents of the Operating
Instructions and, if applicable, of the Installation
Instructions.
If an addendum is included in the shipment, it has
the highest priority for reading. All other contents
of the documentation retain their validity.
Installation Instructions The Installation Instructions contain all of the infor-
mation and safety precautions needed for the
proper mounting and installation of the product.
The Installation Instructions are contained as an
excerpt from the Operating Instructions in every
delivery.
The Installation Instructions have the second
highest level of priority for reading.
Operating Instructions The Operating Instructions contain all the infor-
mation and safety precautions needed for the
proper operation of the product according to its
intended use. The Operating Instructions are
included on the supplied storage medium and can
also be downloaded in the download area from
www.heidenhain.de. The Operating Instructions
must be read before the unit is put into service.
The Operating Instructions have the third highest
level of priority for reading.
Have you found any errors or would you like to suggest changes?
We continuously strive to improve our documentation for you. Please help us by
sending your suggestions to the following e-mail address:
16
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Fundamentals | Documentation on the product
1.4.3 Storage and distribution of the documentation
The instructions must be kept in the immediate vicinity of the workplace and must
be available to all personnel at all times. The operating company must inform the
personnel where these instructions are kept. If the instructions have become
illegible, the operating company must obtain a new copy from the manufacturer.
If the product is given or resold to any other party, the following documents must
be passed on to the new owner:
Addendum (if supplied)
Installation Instructions
Operating Instructions
1.5 About these instructions
These instructions provide all the information and safety precautions needed for
the safe operation of the device.
1.5.1 Document category
Operating Instructions
These instructions are the Operating Instructions for the product.
The Operating Instructions
Are oriented to the product life cycle
Contain all information and safety precautions needed for the proper operation
of the product according to its intended use
1.5.2 Target groups for the instructions
These instructions must be read and observed by every person who performs any
of the following tasks:
Mounting
Installation
Commissioning and configuration
Operation
Service, cleaning and maintenance
Troubleshooting
Removal and disposal
1
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
17
Fundamentals | About these instructions
1
1.5.3 Target groups according to user types
The target groups of these instructions refer to the various user types of the
product and their authorizations.
The product features the following user types:
OEM user
The OEM (Original Equipment Manufacturer) user has the highest level of
permissions. This user is allowed to configure the product's hardware (e.g.
connection of encoders and sensors). He can create Setup and Operator-type
users, and configure the Setup and Operator users. The OEM user cannot be
duplicated or deleted. This user cannot be logged in automatically.
Setup user
The Setup user configures the product for use at the place of operation. This user
can create Operator-type users. The Setup user cannot be duplicated or deleted.
This user cannot be logged in automatically.
Operator user
The Operator user is permitted to use the basic functions of the product.
An Operator-type user cannot create additional users, but is allowed to edit
various operator-specific settings, such as his name or the language. A user of the
Operator group can be logged in automatically as soon as the product is switched
on.
1.5.4 Contents of the chapters
The table below shows:
from which chapters these instructions are derived from
which information the chapters of the instructions contain
to which target groups the chapters of the instructions mainly apply
Section Contents
Target
group
This chapter contains information about…
OEM
Setup
Operator
1 "Fundamentals"
... this product
... these instructions
✓ ✓ ✓
2 "Safety"
... Safety regulations and safety measures
for mounting the product
for installing the product
for operating the product
✓ ✓ ✓
3 "Transport and storage"
... transporting the product
... storing the product
... items supplied with the product
... accessories for the product
✓ ✓
4 "Mounting"
... correct mounting of the product
✓ ✓
5 "Installation"
... correct installation of the product
✓ ✓
18
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Fundamentals | About these instructions
Section Contents
Target
group
This chapter contains information about…
OEM
Setup
Operator
6 "Basic operation"
... the operating elements of the product user
interface
... the user interface of the product
... basic functions of the product
✓ ✓ ✓
7 "Commissioning"
... commissioning the product
✓
8 "Setup"
... correct setup of the product
✓
9 "Measuring"
... the performance of a measurement
... the transmission of measured values to a computer
(measured value output)
✓
10 "File management"
... the functions of the "File management" menu
✓ ✓ ✓
11 "Settings"
... setting options and associated setting parameters
for the product
✓ ✓ ✓
12 "Servicing and
maintenance"
... general maintenance work on the product
✓ ✓ ✓
13 "What to do if ..."
... causes of faults or malfunctions of the product
... corrective actions for faults or malfunctions of the
product
✓ ✓ ✓
14 "Removal and disposal"
... disassembly and disposal of the product
... environment protection specifications
✓ ✓ ✓
15 "Specifications"
... the technical data of the product
... product dimensions and mating dimensions
(drawings)
✓ ✓ ✓
16 "Index"
This chapter enables accessing the content of these
instructions according to specific topics.
✓ ✓ ✓
1
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
19
Fundamentals | About these instructions
1
1.5.5 Notes in this documentation
Safety precautions
Precautionary statements warn of hazards in handling the product and provide
information on their prevention. Precautionary statements are classified by hazard
severity and divided into the following groups:
DANGER
Danger indicates hazards for persons. If you do not follow the avoidance
instructions, the hazard will result in death or severe injury.
WARNING
Warning indicates hazards for persons. If you do not follow the avoidance
instructions, the hazard could result in death or serious injury.
CAUTION
Caution indicates hazards for persons. If you do not follow the avoidance
instructions, the hazard could result in minor or moderate injury.
NOTICE
Notice indicates danger to material or data. If you do not follow the avoidance
instructions, the hazard could result in property damage.
Informational notes
Informational notes ensure reliable and efficient operation of the product.
Informational notes are divided into the following groups:
The information symbol indicates a tip.
A tip provides additional or supplementary information.
The gear symbol indicates that the function described depends on the
machine, e.g.
Your machine must feature a certain software or hardware option
The behavior of the functions depends on the configurable machine
settings
The book symbol represents a cross reference to external
documentation, e.g. the documentation of your machine tool builder or
other supplier.
20
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236

HEIDENHAIN GAGE-CHEK 2000 (1248580.1.3.x) Operating instructions

Category
Network management software
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI