Nokia CR-102 User manual

Category
Navigators
Type
User manual

This manual is also suitable for

Nokia CR-102

The Nokia CR-102 is a mobile holder designed to be attached to the Nokia Holder Easy Mount HH-12, which in turn is attached to the windscreen of your vehicle. It allows you to use your mobile device in your vehicle in a safe and convenient way.

The CR-102 is compatible with a wide range of Nokia mobile devices. It features a secure locking mechanism that keeps your device firmly in place, even on bumpy roads. The holder can be adjusted to the desired viewing angle, ensuring that you have a clear view of your device's screen.

The CR-102 is easy to install and remove. It comes with all the necessary hardware, including a screw to attach it to the mounting plate. The holder can be quickly and easily removed from the mounting plate when you need to use your device outside of your vehicle.

Nokia CR-102

The Nokia CR-102 is a mobile holder designed to be attached to the Nokia Holder Easy Mount HH-12, which in turn is attached to the windscreen of your vehicle. It allows you to use your mobile device in your vehicle in a safe and convenient way.

The CR-102 is compatible with a wide range of Nokia mobile devices. It features a secure locking mechanism that keeps your device firmly in place, even on bumpy roads. The holder can be adjusted to the desired viewing angle, ensuring that you have a clear view of your device's screen.

The CR-102 is easy to install and remove. It comes with all the necessary hardware, including a screw to attach it to the mounting plate. The holder can be quickly and easily removed from the mounting plate when you need to use your device outside of your vehicle.

Nokia Holder Easy Mount HH-12
& Nokia Mobile Holder CR-102
9209691/1
© 2008 Nokia. All rights reserved.
Nokia, Nokia Connecting People and the Nokia Original Accessories logo are registered
trademarks of Nokia Corporation.
Introduction
The Nokia Holder Easy Mount HH-12 is a mounting device that
allows you to attach your compatible Nokia mobile holder to the
windscreen of your vehicle.
To use the mounting device with your compatible mobile holder, attach
the mounting device to the windscreen, adjust the mounting device
into the desired position, and attach your mobile holder to the
mounting device.
This product may contain small parts. Keep them out of the reach of
small children.
General safety instructions
Obey all local laws. Always keep your hands free to operate the vehicle
while driving. Your first consideration while driving should be road
safety. Only operate the mounting device or mobile holder if it is safe
to do so under all driving conditions.
ENGLISH
When you install the mounting device or mobile holder, ensure that
they do not interfere with or hinder the steering or braking systems
or other systems used in the operation of the vehicle (for example,
airbags) or disturb your field of vision while driving.
Check that the deployment of the airbag is not blocked or impaired in
any way.
Ensure that the mounting device or mobile holder is not installed
where you might come in contact with it in the event of an accident
or collision.
Periodically check that the suction cup at the bottom of the
mounting device is firmly attached to the windscreen, especially if
the ambient temperature changes a lot.
Never leave the mounting device inside the vehicle in direct sunlight
or in excessive heat. The mounting device and suction cup may be
damaged and adhesion may be impaired if the inside temperature
exceeds +70°C (160°F).
ENGLISH
Attach to a windscreen
Locate a safe mounting surface on the windscreen, and clean the
surface thoroughly with a glass cleaner and a clean towel. If the
ambient temperature is below +15°C (60°F), carefully warm the
surface and the suction cup with a hair dryer to ensure a firm grip
on the windscreen. Ensure that you do not heat the windscreen
excessively to avoid damage to it.
Press the suction cup at the bottom of the
mounting device firmly on the windscreen
(see step 1 at the start of this guide), and
carefully push the locking lever inside the
mounting device (2) towards the suction cup
to create a vacuum between the suction cup
and the windscreen. Check that the suction
cup is firmly attached.
ENGLISH
To detach the mounting device from the
windscreen, carefully push the locking lever
toward the top of the mounting device (3),
and pull the strap located on the edge of the
suction cup (4).
Set to the desired position
Do not adjust the mounting device while driving.
To set the top of the mounting device to the
desired position, loosen the two screws in the
middle of the mounting device, turn the top
to the desired position, and tighten the
screws (5). Ensure that the top of the device
is firmly locked into place.
To set the mounting plate at the top of the
mounting device to the desired position, loosen the screw below the
plate, turn the plate to the desired position, and tighten the screw (6).
ENGLISH
Mount the mobile holder
To attach a compatible Nokia mobile holder to the mounting plate,
use the screw supplied with the holder.
To use the CR-102 mobile holder, remove the protection plate with
the Nokia text from the holder, use a screwdriver to attach the holder
to the mounting plate with the supplied screw, and replace the
protection plate (7). To insert your mobile device into the holder, push
the catch at the top of the holder (8), and slide the device into the
holder until it locks into place (9). To remove the device, push the
catch (10), and pull the device out (11).
ENGLISH
When attaching a mobile holder, ensure that the display of the
mobile device is clearly visible for the user. For your safety, install
the holder in the upright position.
Care and maintenance
Your device is a product of superior design and craftsmanship and
should be treated with care. The following suggestions will help you
protect your warranty coverage.
Do not use or store the device in dusty, dirty areas. Its moving
parts can be damaged.
Do not drop, knock, or shake the device. Rough handling can break
fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
Do not paint the device. Paint can clog the moving parts and
prevent proper operation.
If the product is not working properly, take it to the nearest
authorised service facility for service.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Nokia CR-102 User manual

Category
Navigators
Type
User manual
This manual is also suitable for

Nokia CR-102

The Nokia CR-102 is a mobile holder designed to be attached to the Nokia Holder Easy Mount HH-12, which in turn is attached to the windscreen of your vehicle. It allows you to use your mobile device in your vehicle in a safe and convenient way.

The CR-102 is compatible with a wide range of Nokia mobile devices. It features a secure locking mechanism that keeps your device firmly in place, even on bumpy roads. The holder can be adjusted to the desired viewing angle, ensuring that you have a clear view of your device's screen.

The CR-102 is easy to install and remove. It comes with all the necessary hardware, including a screw to attach it to the mounting plate. The holder can be quickly and easily removed from the mounting plate when you need to use your device outside of your vehicle.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI