Motorola 68P09396A92-A Owner's manual

Category
Mobile phones
Type
Owner's manual

This manual is also suitable for

Cellular
Telephone
Owners
Manual
WELCOME
Thank you for selecting Motorola—a world leader in
cellular technology.
All Motorola cellular phones are designed and manufactured in the
United States to meet Motorola’s exacting specifications and world
class quality standards. This phone is no exception. This personal
phone withstands our rigorous durability tests including tempera-
ture, humidity, shock, dust, vibration, and a drop test.
Product superiority is yours!
For any information about your product or accessories for your
product, please call Motorola at: 1-800-331-6456, 1-800-461-
4575 (Canada).
For any information about your cellular service, please call your
service provider (Carrier).
Carriers Name___________________________________________
Carriers Phone Number___________________________________
• You will need to have the following information when you
inquire about your phone or service. This information is located
on the back of your telephone after you remove the battery.
ESN Number_____________________________________________
MSN Number ____________________________________________
Model Number___________________________________________
Cellular Phone Number ___________________________________
Unlock Code—The sequential code of 1, 2, 3 is the standard
unlock code programmed into all phones by the factory. It is
often changed to the last three digits of your cellular phone num-
ber by the Carrier. For easy access to this unlock code in the
future, please list it here now:__________. (Please contact your
place of purchase if your unlock code has been changed and
you do not have this information.)
Warranty Expiration Date__________________________________
Date of Purchase _________________________________________
2
WELCOME
TABLE OF CONTENTS
GENERAL SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . 6
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PHONE OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Preparing Battery for Initial Use . . . . . . . . . . . . . . . . . . . . . 12
Attaching the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Quick Change Method . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turn Phone On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Placing a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Automatic Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Call in Absence Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 18
Signal Strength Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Displaying Battery Voltage Meter. . . . . . . . . . . . . . . . . . . . 19
Low Battery Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Adjusting Earpiece Volume . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting Ringer Volume. . . . . . . . . . . . . . . . . . . . . . . . . . 20
Volume Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Muting Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Displaying Own Phone Number . . . . . . . . . . . . . . . . . . . . 20
Two-System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Illuminated Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Antenna System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
MEMORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Storing Numbers to a Memory Location. . . . . . . . . . . . . . . 22
Memory Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Changing Entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3
TABLE OF CONTENTS
TABLE OF CONTENTS
Clearing Entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Recalling from Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Memory Scrolling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Recalling Last Number Called . . . . . . . . . . . . . . . . . . . . . . 24
Recalling Area Code / Prefix (Postscripting) . . . . . . . . . . . . 24
Turbo Dial™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
One-Touch Emergency Dialing . . . . . . . . . . . . . . . . . . . . . 25
Super Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Scratch Pad Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Tone Dialing (Two-Part Calling) . . . . . . . . . . . . . . . . . . . . . 26
Pause Dialing (Memory Linking) . . . . . . . . . . . . . . . . . . . . 26
Placing a Linked Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
To Enable/Disable a Specific Feature . . . . . . . . . . . . . . . . . 29
Distinctive Ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Automatic Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Multiple Key Answer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Automatic Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
One-Touch Emergency Dialing . . . . . . . . . . . . . . . . . . . . . 32
VOX Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Reminder Beeps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
PIN Code Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Feature Status Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
TIMERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Individual Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Resettable Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cumulative Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
One Minute Beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4
TABLE OF CONTENTS
SECURITY FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Electronic Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Displaying Unlock Code . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing Unlock Code. . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Automatic Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Outgoing Call Restrictions. . . . . . . . . . . . . . . . . . . . . . . . . 38
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Chargers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Ultra Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Travel Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Miscellaneous Accessories . . . . . . . . . . . . . . . . . . . . . . . . 44
ROAMING AND SYSTEM OPERATION. . . . . . . . . . . . . . . 47
Service Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Weak Signal Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Roaming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Selectable System Registration. . . . . . . . . . . . . . . . . . . . . . 48
Changing System Type . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
C Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
BEFORE CALLING FOR SERVICE . . . . . . . . . . . . . . . . . . . 51
MESSAGE GLOSSARY. . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
PATENT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . 60
QUICK REFERENCE SECTION. . . . . . . . . . . . . . . . . . . . . . 61
5
GENERAL SAFETY INFORMATION
IMPORTANT
Read This Information Before Using Your
Hand-held Portable Cellular Telephone
First introduced in 1984, the hand-held portable cellular telephone
is one of the most exciting and innovative electronic products ever
developed. With it, you can stay in contact with your office, your
home, emergency services, and others.
For the safe and efficient operation of your phone, observe
these guidelines.
Your cellular telephone is a radio transmitter and receiver. When it
is ON, it receives and also sends out radio frequency (RF) energy.
The phone operates in the frequency range of 824 MHz to 894
MHz and employs commonly used frequency modulation (FM)
techniques. When you use your phone, the cellular system
handling your call controls the power level at which your phone
transmits. The power level can range from 0.006 of a watt to 0.6
of a watt.
Exposure to Radio Frequency Energy
In 1991, the Institute of Electrical and Electronics Engineers (IEEE),
and in 1992, the American National Standards Institute (ANSI),
updated the 1982 ANSI Standard for safety levels with respect to
human exposure in RF energy. Over 120 scientists, engineers, and
physicians from universities, government health agencies, and
industry, after reviewing the available body of research, developed
this updated Standard. In March 1993, the Federal
Communications Commission (FCC) proposed the adoption of this
updated Standard.
The design of your phone complies with this updated Standard. If
you want to limit RF exposure even further, you may choose to con-
trol the duration of your calls and operate your phone in the most
power efficient manner.
Efficient Phone Operation
For your phone to operate at the lowest power level consistent with
satisfactory call quality. Please observe the following guidelines.
If your phone has an extendable antenna, extend it fully. Some
models allow you to place a call with the antenna retracted.
However, your phone operates more efficiently with the antenna
fully extended.
Hold the phone as you would any other telephone. While speak-
ing directly into the mouthpiece, position the antenna up and over
your shoulder.
6
GENERAL SAFETY INFORMATION
GENERAL SAFETY INFORMATION
Do not hold the antenna when the phone is in use. Holding the
antenna affects call quality and may cause the phone to operate at
a higher power level than needed.
Antenna Care and Replacement
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin a minor burn may result.
Replace a damaged antenna immediately. Take your phone to a
qualified service center for repair.
Use only the supplied or approved antenna. Non-approved anten-
nas, modifications, or attachments could impair call quality, dam-
age the phone and violate FCC regulations.
Driving
Check the laws and regulations on the use of cellular telephones in
the areas where you drive. Always obey them. Also, when using
your phone while driving, please:
Give full attention to driving,
Use hands-free operation, if available, and
Pull off the road and park before making or answering a call if
driving conditions so require.
Electronic Devices
Most modern electric equipment—for example equipment in hos-
pitals and cars—is shielded from RF energy. However, RF energy
from cellular telephones may affect malfunctioning or improperly
shielded electronic equipment.
RF energy may affect improperly installed or inadequately shielded
electronic operating and entertainment systems in motor vehicles.
Check with the manufacturer or its representative to determine if
these systems are adequately shielded from external RF energy. You
should also check with the manufacturer of any equipment that has
been added to your vehicle.
Consult the manufacturer of any personal medical devices (such as
pacemakers, hearing aids, etc.) to determine if they are adequately
shielded from external RF energy.
Turn your phone OFF in health care facilities when any regulations
posted in the areas instruct you to do so. Hospitals or health care
facilities may be using remote RF monitoring equipment.
Aircraft
Turn your phone OFF before boarding any aircraft.
Use it on the ground only with crew permission.
Do not use in the air.
7
GENERAL SAFETY INFORMATION
To prevent possible interference with aircraft systems, Federal
Aviation Administration (FAA) regulations require you to have per-
mission from a crew member to use your phone while the plane is
on the ground. To prevent interference with cellular systems, FCC
regulations prohibit using your phone while the plane is in the air.
Children
Do not allow children to play with your phone. It is not a toy.
Children could hurt themselves or others (by poking themselves or
others in the eye with the antenna, for example). Children also
could damage the phone, or make calls that increase your tele-
phone bills.
Blasting Areas
To avoid interfering with blasting operations, turn your unit OFF
when in a blasting area or in areas posted:
Turn off two-way
radio. Construction crews often use remote control RF devices to
set off explosives.
Potentially Explosive Atmospheres
Turn your phone OFF when in any area with a potentially explosive
atmosphere. It is rare, but your phone or its accessories could gener-
ate sparks. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include: fueling areas such as gas sta-
tions, below deck on boats, fuel or chemical transfer or storage facil-
ities, and areas where the air contains chemicals or particles, such as
grain, dust, or metal powders, and any other areas where you would
normally be advised to turn off your vehicle engine.
Do not transport or store flammable gas, liquid, or explosives in the com-
partment of your vehicle which contains your phone or accessories.
Vehicles powered by liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA 02269,
Attn: Publications Sales Division.
Magnetic Storage Media
Your phone contains a magnet. Do not place your phone in close
proximity to magnetic storage media such as diskettes or credit cards
for extended periods of time.
Batteries
CAUTION: To prevent injuries or burns, do not allow metal objects
to contact or short circuit the battery terminals.
8
GENERAL SAFETY INFORMATION
The design of Motorola’s cellular telephone complies with all applic-
able RF Safety Standards.
Motorola meets the standards and recommendations for the protec-
tion of public exposure to RF electromagnetic energy established by
governmental bodies and other qualified organizations, such as the
following:
National Council on Radiation Protection and Measurements
(NCRP). Report 86.
Department of Health and Welfare Canada Safety Code 6.
Verband Deutscher Elektroigenieure (VDE) DIN-0848.
Directives of the European Community, Directorate General V in
Matters of Radio Frequency Electromagnetic Energy.
National Radiological Protection Board of the United Kingdom.
GS-11, 1988.
American National Standards Institute (ANSI)/IEEE
C95.1-1992.2.
INTRODUCTION
This phone represents the state-of-the-art in personal cellular tele-
phones today. The listing below shows just a few of the exceptional
features that this telephone contains:
Signal Strength Meter Turbo Dialing
Battery Meter Auto Answer
One-Touch Emergency Dialing Call Timers
9 Selectable Ringer Styles Memory Protect
Multiple Key Answer
Remember, these are just a few of the great features that your phone
provides to meet your business and personal needs. In addition, a num-
ber of accessory options are available to help you tailor your cellular
system to your individual preferences. These include a 3-Watt Booster
or an Ultra Saver that plugs into the vehicle’s cigarette lighter to con-
serve the telephone’s battery.
To help you become familiar with your telephone’s features, we suggest
you experiment with them as you progress through this manual.
Please read the General Safety Information beginning on page 6 before
operating the unit.
9
INTRODUCTION
10
PHONE OVERVIEW
888
8888888
1
2
3
6
5
8
4
7
5
PHONE OVERVIEW
1 Retractable Antenna — Extend for optimum performance.
2 Earpiece
3 Status Indicators — Flash or light steadily to alert you to a
number of conditions:
IU
(In Use)
— Flashes while a call is in process.
RM (Roam) — Flashes if phone is accessing a service area out-
side of your home system.
NS
(No Service)
— Flashes or lights steadily if the phone is
beyond the range of a cellular system. While lit, calls cannot
be placed or received (See Service Area, page 47).
Signal Strength Indicator — Flashes the relative strength of the
signal received by the phone.
Battery Strength Indicator — Lights steadily to indicate the
estimated remaining capacity of the battery (See Displaying
Battery Voltage Meter, page 19).
4 Number Display — Displays phone number, memory location
number , or message. Some information will require viewing
sequentially displayed messages.
5 Function Keys
Recalls and displays numbers stored in memory.
Ø Stores numbers in memory.
Ç Clears digits from the display. Press and hold to clear
entire display at once.
Ï Used in conjunction with other keys to access special
features.
Í Places or answers a call.
´ Ends a call or exits special functions.
Turns the phone on or off.
≥ and ≤ Adjust earpiece and ringer volume.
6 Numeric Keypad — Enters call information or programs features.
7 Headset Jack — For handsfree use with optional headset
accessory.
8 Mouthpiece
11
GETTING STARTED
Preparing Battery for Initial Use
The Nickel-Cadmium or Nickel Metal Hydride Battery supplied with
your telephone must be fully charged before placing your phone into
service. The batteries are shipped from the factory in a discharged
state in order to extend the life of the battery. It is recommended that
you charge new batteries overnight, but not longer than 24 hours,
using a Motorola-approved charger.
WARNING: Battery may explode if exposed to fire. Charging your
battery in anything other than a Motorola charger will void
your warranty.
CAUTION: To prevent injuries or burns, do not allow metal objects
to contact or short circuit the battery terminals.
12
GETTING STARTED
GETTING STARTED
Attaching the Battery
1. Place the battery pack on the phone so that its grooves align.
Align the top of the battery with the line on the back of the
phone right below the arrows.
2. Slide upward in the direction of the arrows on the back of the
phone until it clicks into place.
Battery Attachment
Removing the Battery
1. Turn your telephone off.
2. Depress the latch button on the rear of the battery and slide
the battery pack downward until it stops.
3. Lift the battery off.
Battery Removal
13
GETTING STARTED
Quick Change Method
The Quick Change Method allows you to remove your telephone
battery at any time and replace it with a charged spare battery dur-
ing a telephone call.
This is especially useful if you receive the Lo BAT(low battery)
message or audible tone during a call. Simply remove the battery
from the telephone, put on the spare battery, and press . This
will return you to your telephone call. The phone will not go
through the normal power-up cycle described on page 15. You will
only have 4 seconds to complete this action before your telephone
call is terminated. It is a good idea to practice this procedure a few
times before using it on an actual phone call. Advise the party on
the other end of the call before beginning this procedure.
14
BASIC OPERATION
Turn Phone On
1. Extend antenna for optimal performance.
2. Press once.
3. Check the status indicators and display messages before plac-
ing a call.
Start-up Self Tests
Each time the telephone is turned on, it performs a series of self
tests, sounds a tone, and lights all display positions and status indi-
cators to check their operation. The signal strength meter and bat-
tery strength meter then display and the keypad lights momentarily,
as it will any time a key is pressed.
Message Explanation
If your phone is programmed for two cel-
lular systems, one of these messages will
appear in the display upon power up.
These are reminders as to which system
and phone number are currently
in use.
Indicates that the phone has been locked
and cannot send or receive calls until
unlocked.
Loc/D
In Use Indicator
No Service Indicator Roam Indicator
888
8888888
15
BASIC OPERATION
A2
A1
B2
B1
BASIC OPERATION
Status Indicators Explanation
Indicators IU (In Use Indicator)
•Flashes when call is in progress.
NS (No Service Indicator)
Flashes or lights steadily if phone
is beyond range of a cellular
service area.
Calls cannot be placed or
received while NS is lit.
RM (Roam Indicator)
•If slow or rapid flashing, you are
accessing a service area outside
of your home system.
Slow Flashing
Roaming on a home
type system.
Rapid Flashing
Roaming on a non-home
type system.
If no key is pressed within 8 seconds:
The keypad backlight will extinguish to conserve the battery level.
The signal strength meter will continue to flash indicating that the
power is still on.
16
888
8888888
888
8888888
888
8888888
BASIC OPERATION
Placing a Call
1. With the power on, enter the number you wish to call.
2. Press Í.
3. Begin the conversation when the called party answers.
4. To terminate the call, press ´.
To Correct an Error
To clear the last digit entered, press and quickly release Ç. To
clear the entire entry, press and hold Ç until the entire entry
is erased.
If Entering More Than 10 Digits
You can call a phone number with up to 16 digits, but only the
last 10 digits will appear in the display.
When recalling a stored phone number that is longer than 10 dig-
its, the display will flash the memory location number and the last
10 digits of the number. Press again to view entire number.
Unsuccessful Call Attempts
If you hear one of the following signals, you have not successfully
completed your call.
Tone / Message Description
Cellular System Busy
fast busy Press Í again before ending the unsuccessful
(reorder signal) call attempt to automatically redial the call
SND TO (refer to Automatic Redialing page 18), or press
REDIAL ´ and dial the call again.
Cellular System Could Not Complete the Call
alternating You may have tried to place a call before the
high/low tone NS
(No Service)
indicator stops flashing to let
(intercept) you know your phone was fully operative.
SND TO Either press Í again before ending the
REDIAL unsuccessful call attempt to automatically redial
the call (refer to Automatic Redialing page 18),
or press ´ and dial the call again.
busy signal The called party’s line is busy.
17
BASIC OPERATION
Automatic Redialing
Your telephone includes a convenient feature designed to make
repetitive call attempts automatically when a cellular system
is busy.
If you receive an alternating high/low signal (intercept) or the fast
busy tone (reorder signal) when attempting to place a call and wish
to retry the call, press Í before ending the unsuccessful call
attempt. REDIAL is then displayed.
Your telephone will make the call attempt continuously over the
next 4 minutes. Once a connection is made, the phone will ring
once to alert you so that you may lift the phone to your ear and
begin the conversation.
If the call cannot be completed within 4 minutes, press Í to
begin another cycle.
Receiving a Call
1. Press Í.
NOTE: Pressing Í may activate call transfer or other optional
system features. Contact your Cellular System Provider for more
information.
Call in Absence Indicator
If your phone is on and an incoming call is unanswered, CALL is
displayed for 8 seconds. The display and keypad backlight will
extinguish to conserve the battery level. Pressing any key but Ç
or ´ redisplays CALL to inform you of the call attempt. You must
press Ç or ´ to cancel the message and clear the display.
NOTE: Phone will not display or retrieve the phone number of the
calling party.
Signal Strength Meter
The Signal Strength Meter (SSM) represents the relative strength of
the signal received by your phone. The SSM is displayed as shown.
The alone represents the lowest strength with each additional
representing a stronger signal.
18
BASIC OPERATION
Weak Signal Strong Signal
The SSM appears every time you turn your phone on. After 8
seconds, the SSM will continuously flash the relative strength of the
signal received by the phone.
To best utilize the SSM, you should familiarize yourself with the rel-
ative Signal Strength levels and their associated Call Placement and
Call-in-Progress qualities.
Displaying Battery Voltage Meter
1. Press Ï, .
The Battery Voltage Meter (BVM) represents the current voltage
level of the battery being used. You can use this to estimate the
amount of battery capacity remaining. The BVM is displayed as a
battery bar graph at the left side of the display.
Low Battery Charged Battery
Variables such as temperature, battery age, and charging conditions
may affect battery voltage. To help remember which key to use,
note that battappears on the key.
Low Battery Warning
Low battery power is indicated by a short dual tone repeated peri-
odically, and the displayed message LoBAT. If the message is
ignored, the phone will automatically turn itself off as the battery
approaches discharge.
888
8888888
888
8888888
19
BASIC OPERATION
Adjusting Earpiece Volume
Press and hold or to raise or lower the earpiece volume
level.
Adjusting Ringer Volume
1. Press Ï.
2. Press and hold or to raise or lower ringer volume level.
V olume Meter
The Volume Meter represents the current volume setting and will
appear in the display whenever you adjust the earpiece or the
ringer volume.
Lowest Volume Highest Volume
The volume level is displayed as a bar graph following the letter v
at the left side of the display. The v alone represents the lowest vol-
ume setting with each additional bar representing a higher
volume setting.
Muting Microphone
1. While in a call, press Ï, .
This feature allows you to confer privately with others during a con-
versation. If you press Ï, during a call, the phone will dis-
play MUTE. To reinstate the microphone, press Ï, again.
The mute feature is canceled when you end your call. To help you
remember which key to use, note that muteappears
on the key.
Displaying Own Phone Number
1. Press , £.
2. The phone number that is currently active will be displayed.
3. When you have finished viewing, press Ç.
v=v
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Motorola 68P09396A92-A Owner's manual

Category
Mobile phones
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI