Quick Installation
MB100
Model No.
Wall Mount Bracket for
Linksys SPA900 Series
IP Phones
Mounting Bracket for
Linksys IP Phones
Enables a phone to be
mounted on a wall
Convenient tray to hold
optional Wi-Fi or PoE dongle
Universal design fits all Linksys
SPA900 Series IP Phones
Linksys
A Division of Cisco Systems, Inc.
121 Theory Drive
Irvine, CA 926127USA
E-mail: [email protected]
Web:http://www.linksys.com
Linksys products are available in more than
50 countries, supported by 12 Linksys
Regional Offices throughout the world. For a
complete list of local Linksys Sales and
Technical Support contacts, visit our
Worldwide Web Site at www.linksys.com.
Specifications are subject to change without
notice. Linksys is a registered trademark or
trademark of Cisco Systems, Inc. and/or its
affiliates in the U.S. and certain other
countries. Copyright © 2006 Cisco Systems,
Inc. All rights reserved. Other brands and
product names are trademarks or registered
trademarks of their respective holders.
MB100-QI-61130NC LH
To attach the Mounting Bracket (MB),
align the two cleats on the MB with the
holes in the phone’s base.
Orient the MB such that the phone’s
Ethernet and handset ports are
accessible after installation.
Push the MB onto the phone’s base.
Slide the MB upwards to lock it in place.
Plug in the Ethernet and power cables.
Hang onto screws mounted in the wall.
If a Wi-Fi or PoE dongle is installed (optional),
place in the tray.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Linksys LVS 9000 User manual
-
-
Cisco SPA922 - IP Phone With Switch User manual
-
Linksys SPA922 User manual
-
-
Cisco SPA922 User manual
-
-
-
-