Soundstream Picasso PXW 15/2 Specification

Brand: Soundstream

Model: Picasso PXW 15/2

Type: Specification

WWW.SOUNDSTREAM.COM

4 Ω

2 Ω

2.67 Ω

Arachnid

2 Ω

Wiring method to a monoblock ampli-

fier with the same 2 ohm RMS

rating

as the woofers RMS

rating, or to 1

channel of a 2 channel amplifier with

the same 2 ohm RMS

rating as the

woofers RMS

rating.

Wiring method to a 2 chan-

nel amplifier with the same

4 ohm bridged RMS

rating

as both woofers RMS

rat-

ings added together.

1 Ω

Wiring method to a monoblock amplifier

with a 1 ohm RMS

rating the same as

both woofers RMS

ratings added together.

Wiring methods to a monoblock

amplifier with a 2 ohm RMS

rating the same as all woofers

RMS

ratings added together.

Arachnid

Arachnid Arachnid

Arachnid

WWW.SOUNDSTREAM.COM

Woofer & Enclosure

Information

SW-12RE

SW-12SE

WWW.SOUNDSTREAM.COM

Congratulations on your new Soundstream sub-woofer purchase. We

greatly appreciate your business. This may look like a run-of-the-mill

cardboard box, but it’s actually a protective barrier over one of the

finest engineered and assembled sub-woofers available.

Harmonic Indulgence… Listen and Feel

Features, Parameters, & Dimensions

series wired SW-12SE/RE

Fs (Hz)

29.59

Qms

9.398

Vas (Ft³)

2.43

Cms (mm/N)

.1940

Mms (g)

149.2

Xmax (mm)

9.00

Sd (in²)

77.5

Qes

0.932

Re (Ω)

7.2

Z (Ω)

BL (Telsa)

14.64

Rms Power (watts)

250

Qts

0.848

1w/1m SPL (dB)

84.61

Voice Coil

2” DVC 4 Ω

Overall Dimension

12.625”

Overall Height

6”

Mounting Depth

5.125”

Cutout Dimension

11”

Motor Diameter

5.5”

Motor Height

1.5”

Flange Width

.875”

Flange Height

.75”

Black Zirconium Coated Injection Cone

NBR-Rubber Surround

2” KSV Kapton Voice Coil

Nickel Plated 8ga. Compression Terminal

Poly Cotton Spider

Texture Coating on Stamped Steel Basket

Suspension Integrated Tinsel Leads

Vented Pole Piece

WWW.SOUNDSTREAM.COM

Soundstream does not provide enclosure dimensions as there are

infinite variables when designing a box, i.e. vehicle, amplifier, music

preferences, etc… For designs tailored to your specific needs, please

Enclosure Dimensions

All enclosures should be made of .75” (3/4”) material only. When

possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the

depth of the enclosure to compensate. All volumes INCLUDE vent/

port and subwoofer displacements. DO NOT change the volume

unless you plan on adding a substantial amount of bracing. For

added performance, applying a coat of fiberglass resin to the interior

walls will greatly improve sealing the enclosure. Adding a thin layer

of poly-fill will improve response by smoothing out reflections

within the enclosure.

Enclosure Construction

Enclosure Recommendations

SW-12SE/RE Ported

Cubic

Feet

Port

Diameter

FB/F3

(Hz)

Min.

1.25 3x12 36/38

Opt. 1.5 3x12 32/35

Max. 1.75 3x12 29/32

SW-12SE/RE Sealed

Cubic

Feet

Q T C

Tuning

(Hz)

Min.

0.75 1.669 44.5

Opt. 1 1.490 40.1

Max. 1.25 1.375 37.3

Soundstream Picasso PXW 15/2 Specification

Soundstream Picasso PXW 15/2 Specification

Soundstream Picasso PXW 15/2 Specification

Related papers

Other documents