iON Xenon Series User manual

iON
Brand
iON
Model
Xenon Series
Category
Mobile device chargers
Type
User manual

This manual is also suitable for

iON Xenon Series is a portable battery and uninterruptible power supply (UPS) that can charge your devices and provide backup power in case of a power outage. It has two high-speed USB charging outlets for phones, tablets, and other compatible USB devices, and a DC output for higher voltage devices like laptops and tablets. The iON Xenon Series has a 148Wh/40,200mAh internal battery, a 4-level LED battery indicator, and a tri-color status LED indicator. It comes with a 12-month warranty from the date of purchase.

iON Xenon Series is a portable battery and uninterruptible power supply (UPS) that can charge your devices and provide backup power in case of a power outage. It has two high-speed USB charging outlets for phones, tablets, and other compatible USB devices, and a DC output for higher voltage devices like laptops and tablets. The iON Xenon Series has a 148Wh/40,200mAh internal battery, a 4-level LED battery indicator, and a tri-color status LED indicator. It comes with a 12-month warranty from the date of purchase.

ION Xenon Portable Battery
User Guide
ION Xenon
User Guide
Contents
01: ION XENON AT A GLANCE __________________________ 4
Xenon overview
Accessories
Indicators
02: GETTING STARTED
__________________________________ 6
Set up Xenon portable battery
03: BASICS
_______________________________________________ 8
Start up
Indicators
Connecting devices
Power down
About the battery
04: OPERATING MODES
________________________________ 9
Portable battery bank mode
UPS Mode (Uninterruptable Power Supply)
05: TROUBLE SHOOTING
_______________________________ 10
General suggestions
06: SAFETY AND HANDLING
___________________________ 11
Safety Features
Important safety information
Handling
Repairing
Battery
Charging
07: SUPPORT
____________________________________________ 13
Contact details and warranty information
Specications
ION Xenon
User Guide
4
Xenon overview
Chapter 1:
ION Xenon at a glance
POWER INPUT Connect the provided AC adaptor to the power
input (DC In) to charge the unit.
4 LEVEL LED
POWER BAR
Each Blue LED represents 25% of the total
available battery power.
STATUS
INDICATOR
Status indicator is a tri-colour LED that will
change from green, yellow or red depending on
status.
POWER
BUTTON
Power button to operate the unit. Press and hold
down the power button for 3 seconds to turn on
or off.
USB PORT 1 Connect phone, tablet or USB devices to charge.
5V 2.4Amps, 12Watts.
USB PORT 2 Connect phone, tablet or USB devices to charge.
5V 2.4Amps, 12Watts.
DC OUTPUT Connect higher voltage devices, laptop / tablet to
charge. 19V/4.5Amp.
1 l Power Input
2 l 4 Level LED Power Bar
3 l Status Indicator
4 l Power Button
5 l USB Port 1
6 l USB Port 2
7 l DC Output
1 5 6 72 3 4
ION Xenon
User Guide
5
POWER INPUT Connect the provided AC adaptor to the power
input (DC In) to charge the unit.
4 LEVEL LED
POWER BAR
Each Blue LED represents 25% of the total
available battery power.
STATUS
INDICATOR
Status indicator is a tri-colour LED that will
change from green, yellow or red depending on
status.
POWER
BUTTON
Power button to operate the unit. Press and hold
down the power button for 3 seconds to turn on
or off.
USB PORT 1 Connect phone, tablet or USB devices to charge.
5V 2.4Amps, 12Watts.
USB PORT 2 Connect phone, tablet or USB devices to charge.
5V 2.4Amps, 12Watts.
DC OUTPUT Connect higher voltage devices, laptop / tablet to
charge. 19V/4.5Amp.
The following accessories come with
the Xenon portable battery:
Each Blue LED on the 4 level power bar represents 25% of the
total battery power available .
When the unit is being charged the blue LED lights will ash.
Status indicator is a tri-colour LED that will change from green,
yellow, or red depending on status.
Green LED Light: Battery is on and delivering
power to connected devices.
Yellow LED Light: Battery is on and power
available but there are no connected devices
drawing power.
Red LED Light: Battery is on but running low.
75-100%
50-75%
25-50%
0-25%
One (1) AC/DC power adapter
One (1) 10Amp IEC power cable
5 l USB Port 1
6 l USB Port 2
7 l DC Output
Accessories
Indicators
ION Xenon
User Guide
6
Set up Xenon portable battery
Chapter 2:
Getting Started
1
To get started with the ION Xenon
portable battery you will rst unbox the
new unit.
2
Use the supplied AC/DC adapter to
charge the system to 100% before use.
You can use the USB ports while
recharging the ION Xenon portable
battery.
3
Plug the 5.5mm / 2.1mm DC jack into
the “DC IN” located on the ION Xenon
battery. Once this has been done plug
the 3 pin Australian plug into mains to
charge the ION Xenon battery.
Please note that the ION Xenon will
automatically turn on when you plug in
the DC input. This will be indicated by
the status indicator lighting up.
ION Xenon
User Guide
7
1
To get started with the ION Xenon
portable battery you will rst unbox the
new unit.
2
Use the supplied AC/DC adapter to
charge the system to 100% before use.
You can use the USB ports while
recharging the ION Xenon portable
battery.
3
Plug the 5.5mm / 2.1mm DC jack into
the “DC IN” located on the ION Xenon
battery. Once this has been done plug
the 3 pin Australian plug into mains to
charge the ION Xenon battery.
Please note that the ION Xenon will
automatically turn on when you plug in
the DC input. This will be indicated by
the status indicator lighting up.
4
To turn your ION Xenon battery On
or Off press and hold down the power
button for 3 seconds, the round status
indicator will turn orange once on if
there is no load attached.
5
Attach a load / equipment to the USB
ports or DC output.
6
The round status indicator will turn
green and the ION Xenon will be
powering the attached equipment.
ION Xenon
User Guide
8
Chapter 3:
Basics
Press the power button for three seconds to turn the ION Xenon
battery on, the round Tri colour status indicator will light up orange
if no equipment is attached.
The ION Xenon portable battery comes with two high speed
12Watt 5V, 2.5Amp USB charging outlets designed for phones,
tablets and any other compatible USB devices. It also includes a
DC output for higher voltage devices like compatible 19V/4.5Amp
laptops and tablets. Once any compatible device is attached to the
ION Xenon portable battery the Tri Colour LED will turn green to
show it is connected.
Hold the power button until the indicator lights turn off.
The ION Xenon comes with a 148Wh / 40,200mAh internal battery
string to keep all your devices going in times of need.
The ION Xenon blue LED power bar has four blue LED’s, each
indicating 25% of the total battery power available. A single press of
the power button, will show the battery charge level at any time. The
ION Xenon battery also has a tri colour status LED indicator:
Start up
Connecting Devices
Power Down
About the battery
Indicators
Green LED Light: Battery is on and delivering power to
connected devices.
Yellow LED Light: Battery is on and power available but there are
no connected devices drawing power.
Red LED Light: Battery is on but running low.
ION Xenon
User Guide
9
Power Down
About the battery
Yellow LED Light: Battery is on and power available but there are
no connected devices drawing power.
Chapter 4:
Operating Modes
The ION Xenon acts as a primary power source when devices are
connected to it while it is not connected to mains power.
When the ION Xenon is connected to mains power and mains
power fails the unit will act like a UPS and will turn on automatically
supplying power to the connected devices.
Portable battery bank mode
UPS Mode
(Uninterruptable Power Supply)
ION Xenon
User Guide
Chapter 5:
Troubleshooting
PROBLEM POSSIBLE CAUSE REMEDY
No LED Power Bar
Lights or Tri LED
Lights
Not charged Using the provided AC/
DC adaptor plug the
Xenon into mains to
charge it up.
LED Power bar
lights on but the Tri
LED Light is orange
No devices plugged
into the Xenon
Plug in a device to the
USB or DC output the
Tri colour light will turn
green. If the Xenon
Tri Colour light is still
orange check it has been
turned on by pressing
the power button.
Tri LED Light
is red
Battery power is
low
Using the provided AC/
DC adaptor plug the
Xenon into mains to
charge it up.
General Suggestions
10
ION Xenon
User Guide
11
PROBLEM POSSIBLE CAUSE REMEDY
No LED Power Bar
Lights or Tri LED
Lights
Not charged Using the provided AC/
DC adaptor plug the
Xenon into mains to
charge it up.
LED Power bar
lights on but the Tri
LED Light is orange
No devices plugged
into the Xenon
Plug in a device to the
USB or DC output the
Tri colour light will turn
green. If the Xenon
Tri Colour light is still
orange check it has been
turned on by pressing
the power button.
Tri LED Light
is red
Battery power is
low
Using the provided AC/
DC adaptor plug the
Xenon into mains to
charge it up.
Chapter 6:
Safety and handling
The ION Xenon Portable battery has been designed with a large
range of safety features
• Overload protection
• Overheating protection
• Output short circuit protection, will shut down under
low voltage, over voltage/current situations to protect
the device
Note: Rechargeable batteries have limited number of charge
cycles and may eventually need to be replaced by an ION UPS Pty
Ltd authorised provider. Battery life and number of charge cycles
vary.
WARNING: Failure to follow these safety instructions could
result in re, electric shock, injury, or damage to ION Xenon
PJ-150 or other property. Read all the safety information below
before using ION Xenon PJ-150.
Handle ION Xenon PJ-150 with care. It is made of metal, and plastic
and has sensitive electronic components inside. ION Xenon PJ-150
can be damaged if dropped, burned, punctured, crushed, or if it
comes in contact with liquid.
Don’t open ION Xenon PJ-150 and don’t attempt to repair it
yourself.
Disassembling ION Xenon PJ-150 may damage it or may cause
injury to you. If ION Xenon PJ-150 is damaged, malfunctions or
comes in contact with liquid, contact ION UPS Pty Ltd.
Safety Features
Important safety information
Handling
Repairing
ION Xenon
User Guide
12
Don’t attempt to replace the battery in ION Xenon PJ-150 yourself
as you may damage the battery which could cause overheating and
injury. The lithium-ion battery in ION Xenon should be replaced
only by ION UPS Pty Ltd, and must be recycled or disposed of
separately from household waste. Don’t incinerate the battery.
Charge ION Xenon PJ-150 with the included AC/DC adapter
and cable. Using damaged cables or chargers, or charging when
moisture is present can cause re, electric shock, injury, or damage
to ION Xenon or other property.
Battery
Charging
ION Xenon
User Guide
13
Chapter 7:
Support
The ION Xenon PJ-150 comes with a 12 Month
warranty from date of purchase. For all support and
warranty claims please contact ION UPS Pty Ltd via
email or telephone technical support.
Contact details and warranty
information
Service and support Go to: www.ionups.com.au
Technical support Call: 1300 700 805
ION Xenon
User Guide
14
Specications
Model PJ-150
Capacity 148Wh, 40,200mAh
Power Display 4 level LED battery indicator
Housing Black Aluminium housing
Outputs
2 x USB for phones or tablets
1 x 19V 4.5A Max (via 2.5mm DC Jack)
Protection
Built in short circuit, over charging and
temperature
Dimensions (mm) 123 x 24 x 235
Weight (kg) 1.05 kg
DC Input 19V / 2.5A
(2.1mm DC Jack)
DC Output 19V / 4.5A (2.5mm DC Jack)
USB1 Output 5V / 2.4A
USB2 Output 5V / 2.4A
AC Input Power 100~240V
Time to full charge 3.5~4 hours
Model PJ-150
Capacity 148Wh, 40,200mAh
Power Display 4 level LED battery indicator
Housing Black Aluminium housing
Outputs
2 x USB for phones or tablets
1 x 19V 4.5A Max (via 2.5mm DC Jack)
Protection
Built in short circuit, over charging and
temperature
Dimensions (mm) 123 x 24 x 235
Weight (kg) 1.05 kg
DC Input 19V / 2.5A
(2.1mm DC Jack)
DC Output 19V / 4.5A (2.5mm DC Jack)
USB1 Output 5V / 2.4A
USB2 Output 5V / 2.4A
AC Input Power 100~240V
Time to full charge 3.5~4 hours
ION Xenon
User Guide
[email protected]
www.ionups.com.au
Phone: 1300 700 805
International: +61 2 9096 2700
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

iON Xenon Series User manual

iON
Brand
iON
Model
Xenon Series
Category
Mobile device chargers
Type
User manual
This manual is also suitable for

iON Xenon Series is a portable battery and uninterruptible power supply (UPS) that can charge your devices and provide backup power in case of a power outage. It has two high-speed USB charging outlets for phones, tablets, and other compatible USB devices, and a DC output for higher voltage devices like laptops and tablets. The iON Xenon Series has a 148Wh/40,200mAh internal battery, a 4-level LED battery indicator, and a tri-color status LED indicator. It comes with a 12-month warranty from the date of purchase.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents