Brodit 654944 Datasheet

Category
Holders
Type
Datasheet
27 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 654944
654944 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320286549448
Item no 654944 fits:
Nissan Micra 14-15 (For all countries)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before installing the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the enclosed gap
opener into the gap between the air vent and the center console, to widen the gap. Remove the adhesive tape
cover on the ProClip.
2. Press the angled upper part of the ProClip into the gap between the upper edge of the air vent and the center
console.
3. Press the bottom part of the ProClip upwards/forwards so the angled edge goes into the gap next to the gap
opener. Be careful so the gap in the edge of the ProClip is positioned according to the picture, otherwise it won't
go all the way in.
4. The ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit 654944 Datasheet

Category
Holders
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI