Swann SW242-D8U User manual

User

’

s Manual

MPEG4 DVR SERIES_Z_V1.1

Please read instructions thoroughly before operation and retain it for future reference.

150Z

16CH / 8CH / 4CH

4CH

16CH / 8CH / 4CH Built

-

in DVD

-

RW Writer or CD

-

RW Writer

IMPORTANT SAFEGUARD

Note: Firmware Version: 1066-10-J4-04-AA-12; AP Version: 1046

Note: For any changes of AP, please refer to your distributor.

Note: Any changes of this manual made to the actual product are subjects to no further notification.

CAUTION:

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.

Only operate this apparatus from the type of power source indicated on the label.

The company shall not be liable for any damages arising out of any improper use, even if we have

been advised of the possibility of such damages.

CAUTION

RISK OF ELECTRIC SHOCK

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR

THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN

COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING

MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-

COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY

MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR

ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL

INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC.

SEE HTTP://WWW.MPEGLA.COM

.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated "dangerous voltage" within the product's enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance-(servicing) instructions in the literature

accompanying the appliance.

All lead-free products offered by the company comply with the requirements of the European

law on the Restriction of Hazardous Substances (RoHS) directive, which means our

manufacture processes and products are strictly “lead-free” and without the hazardous

substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product

must be collected separately at the product end-of-life. This applies to your product and any

peripherals marked with this symbol. Do not dispose of these products as unsorted

municipal waste.

CE Mark

This apparatus is manufactured to comply with the radio interference requirements.

We reserve the right to revise or remove any content in this manual at any time. We do not

warrant or assume any legal liability or responsibility for the accuracy, completeness, or

usefulness of this manual. The content of this manual is subject to change without notice.

TABLE OF CONTENTS

PARTS AND FEATURES

1.1 FEATURES -------------------------------------------------------------------------------------------------------------------------

1.2 PACKAGE CONTENTS ---------------------------------------------------------------------------------------------------------

1.3 SPECIFICATION ------------------------------------------------------------------------------------------------------------------

1.4 FRONT PANEL --------------------------------------------------------------------------------------------------------------------

1.5 REAR PANEL ----------------------------------------------------------------------------------------------------------------------

GETTING STARTED

2.1 GETTING STARTED -------------------------------------------------------------------------------------------------------------

BASIC OPERATION

3.1 RECORDING -----------------------------------------------------------------------------------------------------------------------

3.2 PLAYBACK -------------------------------------------------------------------------------------------------------------------------

DETAILED MENU CONFIGURATION

4.1 MENU TREE ----------------------------------------------------------------------------------------------------------------------

4.2 MAIN MENU OPTIONS_ RECORD -----------------------------------------------------------------------------------------

4.3 MAIN MENU OPTIONS_ TIMER --------------------------------------------------------------------------------------------

4.4 MAIN MENU OPTIONS_ DATE ---------------------------------------------------------------------------------------------

4.5 MAIN MENU OPTIONS_ ADVANCE ---------------------------------------------------------------------------------------

4.6 ADVANCE MENU_ CAMERA ------------------------------------------------------------------------------------------------

4.7 ADVANCE MENU_ DETECTION --------------------------------------------------------------------------------------------

4.8 ADVANCE MENU_ DISPLAY ------------------------------------------------------------------------------------------------

4.9 ADVANCE MENU_ ALERT ---------------------------------------------------------------------------------------------------

4.10 ADVANCE MENU_ REMOTE ------------------------------------------------------------------------------------------------

4.11 ADVANCE MENU_ SYSTEM -------------------------------------------------------------------------------------------------

4.12 ADVANCE MENU_ NETWORK ---------------------------------------------------------------------------------------------

4.13 ADVANCE MENU_ BACKUP ------------------------------------------------------------------------------------------------

4.14 ADVANCE MENU_ HDD INFO ----------------------------------------------------------------------------------------------

4.15 ADVANCE MENU_ EVENT LOG --------------------------------------------------------------------------------------------

ADDITIONAL OPERATION

5.1 SEARCH -----------------------------------------------------------------------------------------------------------------------------

5.2 2X DIGITAL ZOOM ---------------------------------------------------------------------------------------------------------------

5.3 KEY LOCK --------------------------------------------------------------------------------------------------------------------------

5.4 SWITCH THE N/P SYSTEM ----------------------------------------------------------------------------------------------------

5.5 USB UPGRADE--------------------------------------------------------------------------------------------------------------------

5.6 LICENSED SOFTWARE AP----------------------------------------------------------------------------------------------------

INSTALL THE SOFTWARE -----------------------------------------------------------------------------------------------

AP BASIC OPERATION ---------------------------------------------------------------------------------------------------

AP ADVANCED SETTING -------------------------------------------------------------------------------------------------

Network ------------------------------------------------------------------------------------------------------------

DDNS ----------------------------------------------------------------------------------------------------------------

MAIL -----------------------------------------------------------------------------------------------------------------

FTP ------------------------------------------------------------------------------------------------------------------

DVR-CAMERA SETTING --------------------------------------------------------------------------------------

DEVICE -------------------------------------------------------------------------------------------------------------

DETECTION -------------------------------------------------------------------------------------------------------

NETWORK BACKUP & PLAYBACK ----------------------------------------------------------------------

SEARCH LIST ----------------------------------------------------------------------------------------------------

TIMER RECORD -------------------------------------------------------------------------------------------------

DATE ----------------------------------------------------------------------------------------------------------------

RECORD SETTING ----------------------------------------------------------------------------------------------

ALARM --------------------------------------------------------------------------------------------------------------

GENERAL ----------------------------------------------------------------------------------------------------------

ACCOUNT ----------------------------------------------------------------------------------------------------------

ONLINE USER INFO --------------------------------------------------------------------------------------------

FILE PATH ---------------------------------------------------------------------------------------------------------

5.7 OPERATION VIA IE BROWSER ----------------------------------------------------------------------------------------------

5.8 OPTIONAL PHERIPHERALS --------------------------------------------------------------------------------------------------

TROUBLE SHOOTING

6.1 FAQ -----------------------------------------------------------------------------------------------------------------------------------

APPENDIX #1

INSTALL THE HDD -----------------------------------------------------------------------------------------------------------

APPENDIX #2

PIN CONFIGURATION ------------------------------------------------------------------------------------------------------

APPENDIX #

3

RS232 PROTOCOL -----------------------------------------------------------------------------------------------------------

APPENDIX #

3

RECORDING TIME TABLE ------------------------------------------------------------------------------------------------

APPENDIX #

4

COMPATIBLE USB BRAND -----------------------------------------------------------------------------------------------

APPENDIX #

5

COMPATIBLE HDD BRAND -----------------------------------------------------------------------------------------------

1

2

4

8

10

11

12

14

15

16

17

18

19

21

22

23

24

25

26

28

29

30

31

32

37

38

39

40

41

42

43

44

45

46

47

48

49

51

53

54

55

56

48

PARTS AND FEATURES

1.1 FEATURES

1.2 PACKAGE CONTENTS

1

NOTE: Please check the package contents to make sure that you receive all accessories shown above.

MPEG4 DVR Technology:

Compression format providing crystal clear images with real time performance

Multiplex:

Allow live display, record, playback, backup, and network all at the same time

Long

-

Recording Hours:

500GB can record more than 4 days. (16CH, Frame Best Quality, 120IPS)

Connect to Independent Disk Array (optional) to have more storage capacity

Backup Function:

Support file backup with a USB flash drive, DVD WRITER or CD WRITER,

and network remote recording & backup

The backup file via DVD Writer or CD Writer can be played directly in your PC via the supplied

licensed AP, or via other media players (Ex: Windows Media Player or RealPlayer) after the file

is converted to “AVI” format.

Remote Surveillance:

Support remote surveillance with the licensed software AP and IE browser

Web surveillance supports 5 users simultaneously

Intelligent Motion Trigger Recording:

With advanced motion detection function, scheduled motion detection recording

(4 different adjustable factors for motion detection sensitivity) and convenient search function,

customized security environments are achieved

Alarm trigger recording will send alerts with images to designated e-mails and the FTP address

Support pre-alarm recording (8MB)

Covert Recording:

A mask replaces the live image with a blank screen & the monitor shows nothing but recording is still on

A/V Support:

Support 4 audio-in, 2 audio-out to record sounds

Support VGA output to monitor (optional)

General:

Support multi-language OSD

System auto recovery after power reconnected

IR remote control of the system and PTZ through RS-485

Support daylight saving function

Support manual / timer / motion / alarm / network remote recording functions

Watermark function ensures the authentication of the recorded images

Support TCP/IP, PPPoE, DHCP and DDNS network connection

ˇˇˇˇ

Digital Video Recorder

ˇˇˇˇ

Screws

ˇˇˇˇ

DSUB PIN Connector

ˇˇˇˇ

Power and Data Bus

ˇ

Optional

ˇˇ

IR Transmitter and IR Receiver

ˇˇˇˇ

Licensed Software AP

ˇˇˇˇ

Adapter

16CH / 8CH / 4CH

DVD-RW / CD-RW

4CH8CH16CHMODEL

1.3 SPECIFICATION

8 inputs, 1 output 4 inputs, 1 output

Programmable with adjustable dwell time (2, 4, 8, 16 sec.)

Dwell Time (Sequential Channel

Switch)

Support PELCO-D protocolPTZ control

Remotely control DVR and PTZ via IR transmitter (RS-485) (4CH: Optional)IR transmitter

TCP/IP, PPPoE, DHCP and DDNSNetwork Protocol

E-mail images, and upload images to FTP site’s specific accountRemote Alarm Notification

10/100 Base-T. Support remote control and live view via EthernetEthernet

Support licensed software AP, and IE browserWeb Interface

front panel * 1front panel * 1, back panel * 1USB Interface

Motion JPEG

Web Transmitting Compression

Format

16 inputs, 1 outputAlarm I/O

Support 2X digital zoom functionPicture Zoom

240 IPS for NTSC

200 IPS for PAL

120 IPS for NTSC

100 IPS for PAL

8CH: support HDD * 2

8CH (D): support HDD *1

4CH: support HDD * 1

4CH (D): support HDD *1

240, 120, 60, 30 IPS <NTSC>

200, 100, 50, 25 IPS <PAL>

120, 60, 30, 15 IPS <NTSC>

100, 50, 25, 12 IPS <PAL>

60, 30, 15, 7 IPS <NTSC>

50, 25, 12, 6 IPS <PAL>

30, 15, 7, 3 IPS <NTSC>

25, 12, 6, 3 IPS <PAL>

480, 240, 120, 60 IPS <NTSC>

400, 200, 100, 50 IPS <PAL>

Adjustable Recording Speed (CIF)

352 × 240 pixels with 240 IPS〈NTSC〉

352 × 288 pixels with 200 IPS 〈PAL〉

352 × 240 pixels with 120 IPS〈NTSC〉

352 × 288 pixels with 100 IPS 〈PAL〉

720 × 480 pixels with 60 IPS〈NTSC〉

720 × 576 pixels with 50 IPS 〈PAL

〉

352 × 240 pixels with 480 IPS〈NTSC〉

352 × 288 pixels with 400 IPS 〈PAL〉

Maximum Recording Rate (CIF)

720 × 480 pixels with 30 IPS〈NTSC〉

720 × 576 pixels with 25 IPS 〈PAL

〉

8 Channels 4 Channels

8CH / 8CH (D) 4CH / 4CH (D)

NTSC / PAL (switchable) Video System

Backup Device

Pre-alarm Recording

Motion Detection Sensitivity

Motion Detection Area

Audio I/O

Multiplex Operation

Refresh Rate

Watermark

Recording Mode

HDD Quick Cleaning

Hard Disk Storage

(IDE type, ATA66) (over 400GB)

Image Quality Setting

Adjustable Recording Speed (Frame)

Maximum Recording Rate (Frame)

Video Output

Video Loop Out

(Composite video signal 1 Vp-p 75Ω BNC)

Video Input

(Composite video signal 1 Vp-p 75Ω BNC)

Video Compression Format

MODEL

Support USB 1.1/ 2.0 flash drive backup and network remote backup

16CH (D) / 8CH (D) / 4CH (D) models also support DVD-WRITER or CD-WRITER backup

Yes (8 MB)

Manual／Timer／Motion／Alarm／Remote Network

4 adjustable variables with precise calculation for motion detection

16 × 12 grids per camera for all channels

4 audio inputs, 2 audio outputs (Mono)

480 IPS for NTSC

400 IPS for PAL

16CH: support HDD * 2

16CH (D): support HDD *1

Best, High, Normal, and Basic

120, 60, 30, 15 IPS <NTSC>

100, 50, 25, 12 IPS <PAL>

live display, record, playback, backup, and network

Yes

Quick clean up the “index system” of the recorded files. 250GB under 2 seconds

720 × 480 pixels with 120 IPS〈NTSC〉

720 × 576 pixels with 100 IPS 〈PAL

〉

Main Monitor Output:

Composite video signal 1 Vp-p 75Ω BNC

Call Monitor Output:

Composite video signal 1 Vp-p 75Ω BNC

16 Channels

MPEG 4

16CH / 16CH (D)

2

 Any modifications made to the actual product are subject to change without notice.

YesKey Lock

YesVideo Loss Detection

Independent Disk Array ; VGA

Converter ; IR Remote Control

4CH:

343mm (W) × 59mm (H) × 223mm (D)

4CH (D):

432mm (W) × 90mm (H) × 326mm (D)

4CH: ＜42 W ; 4CH (D): ＜64 W

432mm (W) × 90mm (H) × 326mm (D)

Dimensions (mm)

＜64 WPower Consumption

8CH / 8CH (D) 4CH / 4CH (D)

Specification Continued …

Optional Peripherals

System Recovery

Operating Temperature

Power Source

Daylight Saving

Date Display Format

Video Adjustable

Camera Title

MODEL

Independent Disk Array ; VGA Converter

System auto recovery after power reconnected

10℃ ~ 40℃ (50℉~104℉)

DC 19V

Yes

YY/MM/DD, DD/MM/YY, MM/DD/YY, and Off

Hue／Color／Contrast／ Brightness

Support up to 6 letters

16CH / 16CH (D)

3

1.4 FRONT PANEL

4

1) POWER:

Press “POWER” button to turn on/ turn off the DVR.

(Under the recording mode, please stop recording before turning off the DVR)

2) MENU:

Press “MENU” button to enter the main menu.

3) ENTER / RECORD:

Press “ENTER” button to confirm.

Press “RECORD” to activate the manual recording

4) “＋ ““－ ”:

Press “＋“or “－” button to change the setting in the menu / to select the channel.

Press “＋“and “

－

－” buttons simultaneously to open / close the DVD / CD WRITER.

5) USB:

Support firmware update and file backup.

6) LED LIGHT:

POWER: Power on

STANDBY: Standby

HDD: HDD is reading or recording

HDD Full: HDD is full.

ALARM: Once the alarm is triggered

TIMER: When timer recording is turned on.

REC: Under the recording status

PLAY: Under the playing status

7) MODE :

Press “MODE ” button to switch the channel display mode.

16CH / 8CH

16CH (D) / 8CH (D) / 4CH (D)

5

8) “ ” :

Press “ ” button to pause playing files.

9) “ ” :

Press “ ” button to stop playing files.

10) “ “ :

Under the playback mode, press “ ” button to fast rewind.

11) “ “ :

Under the playback mode, press “ ” to fast forward.

12) “ZOOM” :

Press “ZOOM” button to enlarge the picture of the selected channel (2X digital

zoom).

13) “PLAY” :

Press “PLAY” button to play the recorded files.

14) “▲▼

◄►“:

Press “▲▼

◄►” to move the cursor up / down / left / right.

15) “SHIFT” + “SEQ” :

Press “SHIFT” + “SEQ” to activate the call monitor function and press “SEQ” to

escape the call monitor mode.

16) “SHIFT” + “AUDIO“ :

Press “SHIFT” + “AUDIO“ to select live or playback sounds of the 4 audio

channels.

17) “SHIFT” + “SLOW“ :

Under the playback mode, press “SHIFT” + “SLOW“ to show slow playback.

18) “SHIFT” + “CH－ “or “CH＋”:

Press “SHIFT” + “CH－ “ or “CH＋” to change the setting in the menu / to select

the channel.

19) “SHIFT” + “SET” :

Press “SHIFT” + “SET” to change the position of the channel display.

Press “▲▼

◄►” to select the channel you would like to change.

Press “＋”or “－” to select the channel you would like to show.

Press “ENTER” button to confirm.

20) “SHIFT” + “SEARCH” :

Press “SHIFT” + “SEARCH” buttons to enter the search mode.

21) “ ” + “ ” :

Press “ ” + “ ” buttons at the same time to enter / exit the PTZ control

mode.

22) “

◄”or “►”+ “POWER”

Press and hold “

◄”or “►”, and press “POWER” to switch to NTSC or PAL

system. Please see “5.4 SWITCHING THE N/P SYSTEM

” at P.30.

1.4 FRONT PANEL

Continued

…

6

1) “HDD Cartridge Lock”:

Lock / Unlock the cartridge of the HDD.

2) “USB”:

Support firmware update and file backup.

3) “LED LIGHT”:

HDD: HDD is reading or recording

HDD Full: HDD is full.

ALARM: Once the alarm is triggered

TIMER: When timer recording is turned on

PLAY: Under the playing status

REC: Under the recording status

4) “MENU”:

Press “MENU” button to enter the main menu.

5) “ENTER”/ “SET”:

Press “ENTER” button to confirm.

Press “SET” to change the position of the channel display.

Press “▲▼

◄►“ to select the channel you would like to change.

Press “＋”or “－” to select the channel You would like to show.

6) “SEARCH ”:

Press “SEARCH” button to enter the search mode.

7) “SLOW ”:

Under the playback mode, press “SLOW“ button to show slow playback.

4CH

7

8) “ZOOM ”:

Press “ZOOM” button to enlarge the picture of the selected channel (2X digital

zoom).

9) “ ” / “ － ”:

Press “ “ button to show the 4 channel display mode.

Press “ － ” button to change the setting in the menu.

10) “SEQ”/ “＋ ”:

Press “SEQ” button to activate the call monitor function and press “SEQ” button

again to escape the call monitor mode.

Press “＋ ” button to change the setting in the menu.

11) “POWER”:

Press this button to turn on / turn off the DVR.

(Under the recording mode, please stop recording before turning off the DVR).

12) “CH1 ”“CH2 ”“CH3 ”“CH4 ”:

Press the button “1”, “2”, “3”or “4” to select the desired channel.

13) “REC”:

Press “REC” button to activate the manual recording.

14) “PLAY”:

Press “PLAY” button to playback the recorded files.

15) “

UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD“:

Press “▲▼

◄►“ to move the cursor up / down / left / right.

Under the playback mode, press “ “ button to pause playback.

Under the playback mode, press “ “ button to stop playback.

Under the playback mode, press “ “ button to fast rewind.

Under the playback mode, press “ “ button to fast forward.

16) “ ” :

Press these two buttons to select live or playback sounds of the 4 audio channels.

17) “ ” :

Press these two buttons at the same time to enter / exit the PTZ control mode.

18) “

◄”or “►”+ “POWER”

Press and hold “

◄”or “►”, and press “POWER” to switch to NTSC or PAL system.

Please see “5.4 SWITCHING THE N/P SYSTEM

” at P.30.

1.5 REAR PANEL

8

DC 19V

INPUT

DISK ARRAY

LOOP

RS 485

INPUT

IR

INPUT INPUT

EXTERNAL I/O

USB

INPUT

LOOP

3

LOOP LOOP LOOP

INPUT

D/V

LAN

INPUT

ACT.

LINK

INPUT

CALL

LOOP LOOP LOOP

MONITOR

31

24

15

16

17

14

1

2

3

4

5

6 7

8

10

9

11

12 13

8CH / 8CH (D)

INPUT

2

LOOP

DC 19V

LOOP LOOP

3

INPUT

4

INPUT

ACT.

LAN

2

LINK

CALLMONITOR

IN

1

4

3

OUT

INPUT

D

/

V

1

HI-IMPEDANCE

4

75?

1

LOOP

EXTERNAL I/O

DISK ARRAY

IR

16

6

2 1

4

7 8

10

179

15

14

11

12 13

4CH / 4CH (D)

DISK ARRAY

INPUT

LOOP

1 2 10 11 12

LA N

16

AC T.

LINK

13 14 155

EXTERNAL I/O

6 7 8 9

HI-IMPEDA NCE

75 ?

USB

D / V

9

IR

1

HI-IMPEDA NCE

RS 485

75? 8

43

CALL

DC19V

24

MONITOR

16

1 3

15

17

13

12

1

2

4

5

6 7

8

10

11

9

14

16

3

16CH / 16CH (D)

9

1) DISK ARRAY PORT:

Connect to one disk array for extending HDD capacity.

2) IR PORT:

Connect to the IR receiver.

3) RS485 PORT:

Connect to external devices (such as PTZ camera) with RS485-A and RS485-B.

4) EXTERNAL I/O PORT:

Insert the supplied 15PIN DSUB to this port for connecting external devices (alarm

input, external alarm, PTZ camera).

For detailed I/O port PIN configuration, please refer to Appendix #2.

5) USB PORT:

Support firmware update and file backup.

6) D/V PORT (Digital Video Port):

Connect to a VGA converter card.

7) LAN:

Connect to Internet by a LAN cable.

8) LINK / ACT LED light:

When the Internet is activated, the LED light will be on.

9) CALL MONITOR:

Connect to CALL monitor. Show the channel switch display. When the alarm is

triggered, the call monitor will show the image of the triggered channel for a period of

time.

10) POWER:

Connect to the provided adapter.

11) FAN:

For ventilation.

12) VIDEO INPUT (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4):

Connect to video sources, such as cameras.

13) LOOP (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4):

Video output.

14) 75Ω / HI-IMPEDANCE:

When using Loop function, please switch to HI-IMPEDANCE. When you don’t use

Loop function, please switch to 75Ω.

15) MONITOR:

Connect to the Main monitor.

16) AUDIO IN (1-4):

Connect to audio sources, such as cameras equipped with the audio function.

When users start the recording function, the audio input will be recorded.

17) AUDIO OUT:

Connect to a monitor or speaker with 2 mono audio outputs from the same source.

1234

2: RS485A

3: RS485B

2.1 GETTING STARTED

GETTING STARTED

10

Connect all the devices to construct a surveillance.

1) Install HDD:

The HDD must be installed before the DVR is turned on. Please refer to Appendix #1 for

HDD installation instructions.

2) Connect cameras, monitors and external devices. Please refer to “Section 1.5 Rear Panel

”

for connection, and Appendix#2 for pin configurations of the external I/O port.

NOTE:

Be sure the cameras are connected and power-supplied before the DVR is

powered on. Otherwise the DVR will not be able to detect N/P system automatically.

3) Connect the AC power cord to power adapter and plug into an electrical outlet.

The standby LED would be on as red. Press the “POWER” button.

The power LED will be on as red.

It takes approximately 10 to 15 seconds to boot the system.

Channel Title

Available Capacity of

Internal HDDs

System Time

Under HDD Overwrite

Mode

Take 16CH as an example

BASIC OPERATION

11

3.1 RECORDING

The DVR offers three recording modes: manual record, event record and timer

record. If the power is off accidentally, recorded video files will still be stored in the

HDDs. The DVR will return to its original recording status after the power is on again.

1) MANUAL RECORDING (continuous recording):

Recording is initiated by manually pressing the “REC” button,

indicated by the sign “●”.

2) EVENT RECORDING (triggered by motion and external alarm):

When this function is activated,

the recording is triggered by a motion or external alarm,

indicated by the sign “ ” (motion) and “ ” (external alarm).

3) TIMER RECORDING (scheduled time):

Recording is scheduled by Timer, indicated by the words “TIMER RECORD”.

Under Recording

NOTE :

When the HDD is full under O/W

recording mode, previous recorded

files may be overwritten without

further warning notices. Under

"Overwrite" mode, DVR will clear

8GB data from the oldest for

overwriting once the HDD is full.

Take 16CH as an example

There must be at least 8192 images of recorded data for playback to work properly.

If not, your DVR will stop the playback. For example, if the IPS is set to 30, the

recording time should be at least 273 seconds (8192 images / 30 IPS) for the

playback to work properly.

Press “ PLAY ” button, and the DVR will display the last recorded video.

1) FAST FORWARD (F.F. ) & FAST REWIND (REW):

You can increase the speed for fast forward and rewind on the DVR.

In the playback mode,

＊ Press ” ” once to get 4X speed forward and press twice to get 8X speed,

etc., and the maximum speed is 32X.

＊ Press ” ” once to get 4X speed rewind and press twice to get 8X speed,

etc., and the maximum speed is 32X.

＊ The type of recorded image size (Frame or CIF) will also be shown on the

screen.

2) PAUSE / IMAGE JOG:

Press “ ” button to pause the current image displayed on the screen.

In the Pause mode,

＊ Press ” ” once to get one frame forward.

＊ Press ” ” once to get one frame rewind.

3) STOP:

Pressing “ ” button under all circumstances will return DVR to live monitoring

mode.

4) CHANNEL SHIFT:

＊ Display mode:

Press MODE “ ” button to select the display mode.

＊ Full Screen Switch:

Press “＋”or “－” button to show the channel in the full screen.

＊ Channel display switch:

Press “ ” + “ ” buttons.

Press “▲”“▼”“

◄”“►” to select the channel you would like to change.

Press “＋”or “－” select the channel you would like to show.

Press “ENTER” button to confirm the setting.

5) SLOW PLAYBACK:

Press “ ” + “ ” button to get 1/4X speed playback and press twice

to get 1/8X speed.

6) AUDIO:

Press “ ” + “ “ to select live or playback sounds of the 4 audio

channels.

3.2 PLAYBACK

12

Note:

For the playback of the DVD or CD backup file, please refer to “Section 4.13 ADVANCE MENU_BACKUP” for details.

16CH / 8CH

16CH (D) / 8CH (D) / 4CH (D)

＊ AUDIO 1 (L) -- audio channel 1, live audio / AUDIO 1 (P) -- audio channel 1, playback audio

＊ AUDIO 2 (L) -- audio channel 2, live audio / AUDIO 2 (P) -- audio channel 2, playback audio

＊ AUDIO 3 (L) -- audio channel 3, live audio / AUDIO 3 (P) -- audio channel 3, playback audio

＊ AUDIO 4 (L) -- audio channel 4, live audio / AUDIO 4 (P) -- audio channel 4, playback audio

13

Press “ PLAY ” button, and the DVR will display the last recorded video.

1) FAST FORWARD (F.F. ) & FAST REWIND (REW):

You can increase speed for fast forward and rewind on the DVR.

In the playback mode,

＊ Press “ “ once to get 4X speed forward and press twice to get 8X speed,

etc., and the maximum speed is 32X.

＊ Press “ “ once to get 4X speed rewind and press twice to get 8X speed,

etc., and the maximum speed is 32X.

＊ The type of recorded image size (Frame or CIF) will also be shown on the screen.

2) PAUSE / IMAGE JOG:

Press “ “ button to pause the current image displayed on the screen.

In the Pause mode,

＊ Press “ “ once to get one frame forward.

＊ Press “ “ once to get one frame rewind.

3) STOP:

Pressing “ “ button under all circumstances will return DVR to live monitoring

mode.

4) CHANNEL SHIFT:

＊ Display mode:

Press MODE “ ” button to 4-channel display.

＊ Full Screen Switch:

Press “＋”or “－” button to show the channel in the full screen.

＊ Channel display switch:

Press “SET” to change the display position of the channel.

Press “

▲▼◄►“ to select the channel you would like to change.

Press “＋”or “－” to select the channel you would like show.

Press “ENTER” button to confirm the setting.

5) SLOW PLAYBACK:

Press “SLOW” button to get 1/4X speed playback and press twice to get 1/8X.

6) AUDIO:

Press “ ” to select live or playback sounds of the 4 audio channels.

＊ AUDIO 1 (L) -- audio channel 1, live audio / AUDIO 1 (P) -- audio channel 1, playback audio

＊ AUDIO 2 (L) -- audio channel 2, live audio / AUDIO 2 (P) -- audio channel 2, playback audio

＊ AUDIO 3 (L) -- audio channel 3, live audio / AUDIO 3 (P) -- audio channel 3, playback audio

＊ AUDIO 4 (L) -- audio channel 4, live audio / AUDIO 4 (P) -- audio channel 4, playback audio

4CH

DETAILED MENU CONFIGURATION

4.1 MENU TREE

14

4.2 MAIN MENU OPTIONS___RECORD

15

Move the cursor to “RECORD”, press ”ENTER”, and the screen will show the following options.

1) MANUAL RECORD ENABLE:

Start / stop the manual recording function.

2) EVENT RECORD ENABLE:

Start / stop the event recording function. When this function is activated, the recording

will be triggered by the motion or external alarm.

3) TIMER RECORD ENABLE

:

Start / stop the timer recording function.

4) OVERWRITE:

Select to overwrite the previous recorded video in HDD. When the HDD is full under

O/W recording mode, previous recorded files will be overwritten without further

warning notices.

5) RECORD IMG SIZE:

There are two recording options: FRAME & CIF. If they want to change the record

image size, users need to stop recording first.

6) RECORD QUALITY:

There are four quality settings: BEST, HIGH, NORMAL & BASIC.

The following (7) ~ (9) sections are for 16-channel DVRs.

For 8-channel DVRs, divide the IPS by 2. For 4-channel DVRs, divide the IPS by 4.

7) MANUAL RECORD IPS:

Recording is activated by pressing the “REC” button. Select the images per second for

manual recording. The options are as the followings:

NTSC

NTSC: FRAME: 120, 60, 30, 15

PAL

PAL: FRAME: 100, 50, 25, 12

CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50

(MENU)

►

RECORD

TIMER

DATE

ADVANCE

Press “MENU” button to enter the main menu list. The default admin password is 0000.

Enter the default password and press “ENTER”. (Users could alter the password later. Please

refer to “Section 4.11 ADVANCE MENU_SYSTEM”

)

Use the following buttons for menu setting:

“▲▼◄► “ to move the cursor

“＋ , －” to choose the numbers / selections

“ ENTER “ to go to the submenu / to confirm the selection

“ MENU “ to go to the menu OSD

/ to confirm the change / to exit the menu OSD

RECORD

MANUAL RECORD ENABLE

EVENT RECORD ENABLE

TIMER RECORD ENABLE

OVERWRITE

RECORD IMG SIZE

RECORD QUALITY

MANUAL RECORD IPS

EVENT RECORD IPS

TIMER RECORD IPS

TOTAL IPS SHARE

16

8) EVENT RECORD IPS:

Recording is activated by events (alarm and motion trigger). Select the images

per second for event recording. The options are as the followings:

NTSC

NTSC: FRAME: 120, 60, 30, 15

PAL

PAL: FRAME: 100, 50, 25, 12

CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50

9) TIMER RECORD IPS:

Recording is activated by the timer schedule. Select the images per second for

timer recording. The options are as the followings:

NTSC

NTSC: FRAME: 120, 60, 30, 15

PAL

PAL: FRAME: 100, 50, 25, 12

CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50

10) TOTAL IPS SHARE:

There are two IPS settings: (Take 16ch as an example)

FIX

FIX: IPS per channel = RECORD IPS ÷ 16 channels

GROUP

GROUP: Every 4 channels will form a group.

IPS per channel = RECORD IPS ÷ 4 ÷ number

of channels under recording within the group.

Ex.: If you set the record IPS as 120 IPS, then:

Channel 01 will get 30 IPS (120 / 4 / 1 = 30)

Channel 05 and 06 each will get 15 IPS (120 / 4 / 2 = 15)

“ ● “ means under recording

4.3 MAIN MENU OPTIONS___TIMER

Move the cursor to “TIMER”, press ”ENTER”, and the screen will show the following

options.

RECORD

DATE START END

OFF 00 : 00 - 00 : 00

DAILY 08 : 00 - 18 : 00

SUN 06 : 00 - 23 : 00

MON-FRI 00 : 00 - 00 : 00

OFF 00 : 00 - 00 : 00

●

06

●

05

●

01

Group 1 :

CH 01 ~ 04

Group 2 :

CH 05 ~ 08

Group 3 :

CH 09 ~ 12

Group 4 :

CH 13 ~ 16

NOTE:

NOTE: When users choose the image size as “CIF”, the total

IPS share will be fixed. That means IPS per channel will be

equal to record IPS divided by 16 channels.

(MENU)

RECORD

►

TIMER

DATE

ADVANCE

17

4.4 MAIN MENU OPTIONS___DATE

(MENU)

RECORD

TIMER

►

DATE

ADVANCE

Move the cursor to “DATE”, press ”ENTER”, and the screen will show the following

options.

NOTE: The illustrated setting means: During the daylight saving time period (start from the 4

th

Sunday of March,

end on the 4

th

Sunday of October), the DVR system time will plus one hour.

1) DATE:

A scheduled record date (SUN/MON/TUE/ WED/ THU/ FRI/ SAT/ MON–FRI / SAT-SUN

/ DAILY/OFF) could be set to activate the timer recording.

NOTE 1 : Specific date could be changed by “＋”or “－” button.

NOTE 2 : If you plan to set the timer recording across the midnight, there are two ways

for setting the timer recording schedule. Please follow the instructions below.

Example 1 :

If you only want to set the recording timer schedule from every Sunday

23:30 to Monday 23:30, then you could set it as Sunday from 23:30 to 23:30.

Example 2 :

If you plan to set the timer recording from Sunday 08:00 to Monday 15:00,

then you could set it as Sunday from 08:00 to 00:00, and Monday 00:00 to 15:00.

Note: Please turn on “TIMER RECORD ENABLE” in RECORD menu (refer to P.15).

2) START:

Select the start time for recording.

3) END:

Select the end time for recording.

DATE

DATE 2006-MAR-28 14:30:00

FORMAT Y-M-D

DAYLIGHT SAVING ON

1) DATE:

Set the correct time of the DVR ( YEAR / MONTH / DAY / HOUR / MIN / SEC).

2) FORMAT:

There are three date formats: Y-M-D, M-D-Y, D-M-Y.

3) DAYLIGHT SAVING:

Specify whether to use daylight saving time and time period. ( START / END)

Daylight saving time can be adjusted manually.

Enter the daylight saving menu to set the start/end time, and adjust the hour of

the daylight saving.

DAYLIGHT SAVING

START 4TH-SUN-MAR 01: 00: 00

END 4TH-SUN-OCT 01: 00: 00

ADJUST 01 : 00

Page is loading ...

Swann SW242-D8U User manual

Swann SW242-D8U User manual

Related papers

Other documents