BEA EMS475 User manual

BEA
Brand
BEA
Model
EMS475
Type
User manual

This manual is also suitable for

BEA EMS475 SERIES

The BEA EMS475 SERIES is a wireless push plate with a built-in RF433 transmitter. It is easy to install and can be used in a variety of applications, including:

  • Door access control
  • Security systems
  • Home automation

The push plate is made of durable stainless steel and has a slim profile of only 1.5 inches. It is tamper-resistant with a recessed front plate and beveled edges. The push plate is also aesthetically pleasing with no visible mounting holes on the front page.

The EMS475 SERIES uses a 433 MHz digital frequency and is rolling code encrypted for security. It is FCC IC part 15 approved.

BEA EMS475 SERIES

The BEA EMS475 SERIES is a wireless push plate with a built-in RF433 transmitter. It is easy to install and can be used in a variety of applications, including:

  • Door access control
  • Security systems
  • Home automation

The push plate is made of durable stainless steel and has a slim profile of only 1.5 inches. It is tamper-resistant with a recessed front plate and beveled edges. The push plate is also aesthetically pleasing with no visible mounting holes on the front page.

The EMS475 SERIES uses a 433 MHz digital frequency and is rolling code encrypted for security. It is FCC IC part 15 approved.

Easy Installation
A wireless push plate integrated
with an RF433 transmitter, which
offers code-encrypted security.
The fully-assembled unit installs
using the quick plate mounting kit
or a standard two or four bolt gang
box. In addition, the push plate
housing can be directly installed
to any flat surface such as a wall or
push plate mounting post using
standard screws.
EasyMount Wireless
Stainless Steel 4.75" Square Style
Push Plate
Powerful Design
The sleek, NEMA-4 unit is
tamper-resistant with a recessed
front plate and beveled edges.
Aesthetically pleasing with a slim line
1.5 in. depth and no visible mounting
holes on the front page.
BEA-Quality Plate
All active plate made of durable
stainless steel. Lifetime warranty
on face plate.
QQuuaalliittyy
IInntteelllliiggeennccee
PPrreecciissiioonn
W W W . B E A S E N S O R S . C O M
P U S H P L A T E
SLIM PROFILE
ONLY 1.5 in.
EMS475 SERIES
1
3
4
D I M E N S I O N A L D R A W I N G S
A P P L I C A T I O N S
R E L A T E D P R O D U C T S
C O M P O N E N T S
T E C H N I C A L S P E C S
Outer Dimensions
(Housing Assembly)
5.12 in. (W) x 5.12 in. (H)
x 1.42 in. (D)
Mounting Options
EasyMount kit
Standard single gang box
Standard double gang box
Flat surface direct mounting
without mounting kit or gang
box
Transmitter Operation
Wireless design
433 Mhz digital frequency
Rolling code encrypted
for security
FCC IC part 15 approved
Finish
16 gauge, 304 2B stainless steel
face plate with:
Brush finish
Powder coat with clear coat
W W W . B E A S E N S O R S . C O M
E
MS475 Housing
A
llows for direct mounting
without mounting kit or gang
box.
10EMS475 - Text only
10EMS475L - Logo only
10EMS4751 - Text and Logo
E M S 4 7 5 S E R I E S
Slight pressure applied to anywhere on the all-active
plate will open the low energy door.
P U S H P L A T E
0
31
21.5
03
1
2
1.
5
1.
63
24.1
5
.12 in.
130 mm.
Side View
3D Perspective
Front View
5
.12 in.
130 mm.
1.42 in.
36.1 mm.
Receiver SuperScanI MC Linx Switch75
2
1
2
3
Front Plate
RF 433 Transmitter Board
Housing
Mounting Bracket
4
EMS475 SERIES
Contact Information
BEA Inc.
RIDC Park West
100 Enterprise Drive
Pittsburgh PA, 15275
PHONE 1-412-249-4100
FAX 1-888-523-2462
TOLL FREE 1-800-523-2462
BEA West
190 East Arrow Highway
Suite A
San Dimas, CA 91773-3314
FAX 1-888-523-2462
TOLL FREE 1-877-232-9378
EasyMount Wireless
Stainless Steel 4.75" Square Style
Push Plate
  • Page 1 1
  • Page 2 2

BEA EMS475 User manual

BEA
Brand
BEA
Model
EMS475
Type
User manual
This manual is also suitable for

BEA EMS475 SERIES

The BEA EMS475 SERIES is a wireless push plate with a built-in RF433 transmitter. It is easy to install and can be used in a variety of applications, including:

  • Door access control
  • Security systems
  • Home automation

The push plate is made of durable stainless steel and has a slim profile of only 1.5 inches. It is tamper-resistant with a recessed front plate and beveled edges. The push plate is also aesthetically pleasing with no visible mounting holes on the front page.

The EMS475 SERIES uses a 433 MHz digital frequency and is rolling code encrypted for security. It is FCC IC part 15 approved.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents