SICK WTV2S-2 V-Optic Operating instructions

Type
Operating instructions

SICK WTV2S-2 V-Optic

The SICK WTV2S-2 V-Optic is a photoelectric proximity sensor with background suppression. It is used for the optical, non-contact detection of objects. The sensor has a sensing range of up to 36 mm and a light spot diameter of 2.5 mm at a distance of 20 mm. The sensor can be used in a variety of applications, including:

  • Object detection: The sensor can be used to detect the presence or absence of objects.
  • Obstacle avoidance: The sensor can be used to prevent objects from colliding with each other.
  • Counting: The sensor can be used to count objects as they pass through a sensing area.

SICK WTV2S-2 V-Optic

The SICK WTV2S-2 V-Optic is a photoelectric proximity sensor with background suppression. It is used for the optical, non-contact detection of objects. The sensor has a sensing range of up to 36 mm and a light spot diameter of 2.5 mm at a distance of 20 mm. The sensor can be used in a variety of applications, including:

  • Object detection: The sensor can be used to detect the presence or absence of objects.
  • Obstacle avoidance: The sensor can be used to prevent objects from colliding with each other.
  • Counting: The sensor can be used to count objects as they pass through a sensing area.
ENGLISH
Photoelectric proximity sensor
with background suppression
Operating instructions
Safety notes
> Not a safety component in accordance with EU Machinery Directive.
> Read the operating instructions before commissioning.
> Connection, mounting, and setting is only to be performed by trained
specialists.
> UL: Only for use in applications in accordance with NFPA 79.
Adapters listed by UL with connection cables are available.
Enclosure type 1.
> When commissioning, protect the device from moisture and
contamination.
Correct use
The WTV2S-2 is a photoelectric sensor for the optical, noncontact detec-
tion of objects.
Starting operation
1 The sensing ranges for the WTV2S-2Xxx20 pushbuttons are assigned
permanent settings during production. No further settings need to be
made. Check the application conditions such as size and reectance
capacity of the object as well as background inuences and compare
with the switching distance diagram.
2 WTV2S-2Fxxxx and WTV2S-2Exxxx
D: dark-switching, output (Q) switches o when an object is present
in the sensing range.
WTV2S-2P13xx and WTV2S-2P31xx
WTV2S-2N13xx and WTV2S-2N31xx
L: light-switching. Output (Q) switches on when an object is present
in the sensing range.
WTV2S-2P11xx and WTV2S-2P32xx
ANT: complementary outputs Q and Q.
3 Detection of transparent and reective objects
K = maximum tilt angle
When detecting transparent objects, a distance of > 70 mm to the
background is recommended.
Maintenance
SICK light barriers are maintenance-free.
We recommend doing the following regularly:
- Clean the external lens surfaces.
- Check the screw connections and plug-in connections.
No modications may be made to devices.
DEUTSCH
Reexions-Lichttaster
mit Hintergrundausblendung
Betriebsanleitung
Sicherheitshinweise
> Kein Sicherheitsbauteil gemäß EU-Maschinenrichtlinie.
> Vor der Inbetriebnahme die Betriebsanleitung lesen.
> Anschluss, Montage und Einstellung nur durch Fachpersonal.
> UL: Nur zur Verwendung in Anwendungen gemäß NFPA 79.
Von UL gelistete Adapter mit Anschlusskabeln sind verfügbar.
Enclosure type 1.
> Gerät bei Inbetriebnahme vor Feuchte und Verunreinigung schützen.
Bestimmungsgemäße Verwendung
Die optoelektronischen Sensoren WTV2S-2 werden zum optischen,
berührungslosen Erfassen von Objekten eingesetzt.
Inbetriebnahme
1 Die Taster WTV2S-2Xxx20 verfügen über produktionsseitig fest
eingestellte Tastweiten. Es ist keine Einstellung erforderlich.
Einsatzbedingungen wie Größe und Remissionsvermögen des
Objektes sowie Hintergrundeinüsse überprüfen und mit dem
Schaltabstandsdiagramm vergleichen.
2 WTV2S-2Fxxxx und WTV2S-2Exxxx
D: dunkelschaltend, Ausgang () schaltet aus, wenn sich ein Objekt
im Tastbereich bendet.
WTV2S-2P13xx und WTV2S-2P31xx
WTV2S-2N13xx und WTV2S-2N31xx
L: hellschaltend. Ausgang () schaltet ein, wenn sich ein Objekt
im Tastbereich bendet.
WTV2S-2P11xx und WTV2S-2P32xx
ANT: Antivalente Ausgänge und Q
3 Erkennung transparenter und spiegelnder Objekte
K = maximaler Kippwinkel
Bei der Erkennung transparenter Objekte wird ein Abstand zum
Hintergrund von > 70 mm empfohlen.
Wartung
SICK-Lichtschranken sind wartungsfrei.
Wir empfehlen, in regelmäßigen Abständen:
– die optischen Grenzächen zu reinigen.
– Verschraubungen und Steckverbindungen zu überprüfen.
Veränderungen an Geräten dürfen nicht vorgenommen werden.
WTV2S-2
V-Optic
------------------------------------------------------- 8016617.15G5 0919 COMAT -----------------------------------------------------
A WTV2S-2Xxx20
3
B
1 WTV2S-2Xxx20
WTV2S-2P / N1320 WTV2S-2P1120 WTV2S-2P / N3120 WTV2S-2Xxxx5
WTV2S-2F / E1320 WTV2S-2F / E3120
3
1 Optical axis, receiver /
Optikachse, Empfänger
2 Optical axis, sender /
Optikachse, Sender
3 Middle axis xing hole Ø 3.2 mm (0.13) /
Mittelachse Montagebohrung Ø 3,2 mm
4 Status indicator LED green: power on /
Anzeige-LED grün: Betriebsspannung aktiv
5 LED indicator yellow: status of received light beam /
Anzeige-LED gelb: Status Lichtempfang
6 Connector /
Anschluss
Ø 3
(0.12)
5.5
(0.22)
7.3
(0.29)
18.9 (0.74)
15 (0.59)
13.5
(0.53)
10.8 (0.43)
21.8 (0.86)
26.8 (1.06)
7.7
(0.30)
1
2
33
4
5
6
M8 x 1
max. 41.5 (1.63)
+ (L+)
(M)
Q
brn
blu
blk
+ (L+)
(M)
Q
brn
blu
blk
1
3
4
+ (L+)
Teach
(M)
brn
wht
blu
blk
1
2
3
Q
4
+ (L+)
Q
(M)
brn
wht
blu
blk
Q
L
L
L
1
0
L
D
Q (PNP)
1
0
1
0
L
D
Q (NPN)
1
0
1
0
Q
Q
PNP (ANT)
1
0
1
0
1
0
NPN (ANT)
Q
Q
0
36
301
36
302
36
30
247
25
10
303
Sensing range
Sensing range max. typ.

Sensing range on white, 90 % remission

Sensing range on gray, 18 % remission

Sensing range on black, 6 % remission

Sensing range on ultra black, 1 % remission

Sensing range on reflective and transparent surfaces
1)
1)
Best detection of reflective and transparent surfaces
within a tilt angle of < +/–10°
10
(0.39)
20
(0.79)
30
(1.18)
40
(1.57)
Distance in mm (inch
)
> 70 mm
+10° –10°
K
When detecting highly transparent
objects, a distance of > 70 mm
to
the back
ground should be maintained!
+10° –10°
K
Maximum tilt angle
More representatives and agencies at www.sick.com ∙ Subject to change
without notice ∙ The specied product features and technical data do not
represent any guarantee.
Weitere Niederlassungen nden Sie unter www.sick.com ∙ Irrtümer
und Änderungen vorbehalten ∙ Angegebene Produkteigenschaften und
technische Daten stellen keine Garantieerklärung dar.
Plus de représentations et d’agences à l’adresse www.sick.com ∙ Sujet à
modication sans préavis ∙ Les caractéristiques de produit et techniques
indiquées ne constituent pas de déclaration de garantie.
Para mais representantes e agências, consulte www.sick.com ∙ Alterações
poderão ser feitas sem prévio aviso ∙ As características do produto e os
dados técnicos apresentados não constituem declaração de garantia.
Altri rappresentanti ed agenzie si trovano su www.sick.com ∙ Contenuti
soggetti a modiche senza preavviso ∙ Le caratteristiche del prodotto e i
dati tecnici non rappresentano una dichiarazione di garanzia.
Más representantes y agencias en www.sick.com ∙ Sujeto a cambio sin
previo aviso ∙ Las características y los datos técnicos especicados no
constituyen ninguna declaración de garantía.
欲了解更多代表机构和代理商信息,请登录 www.sick.com ∙
如有更改 , 不另行通知对所给出的产品特性和技术参数
的正确性不予保证。
その他の営業所は www.sick.com よりご覧ください 予告なし
に変更されることがあります記載されている製品機能およ
び技術データは保証を明示するものではありません。
BZ int49
Detailed addresses and further locations at www.sick.com
Australia
Phone +61 (3) 9457 0600
1800 33 48 02 – tollfree
Austria
Phone +43 (0) 2236 62288-0
Belgium/Luxembourg
Phone +32 (0) 2 466 55 66
Brazil
Phone +55 11 3215-4900
Canada
Phone +1 905.771.1444
Czech Republic
Phone +420 234 719 500
Chile
Phone +56 (2) 2274 7430
China
Phone +86 20 2882 3600
Denmark
Phone +45 45 82 64 00
Finland
Phone +358-9-25 15 800
France
Phone +33 1 64 62 35 00
Germany
Phone +49 (0) 2 11 53 010
Greece
Phone +30 210 6825100
Hong Kong
Phone +852 2153 6300
Hungary
Phone +36 1 371 2680
India
Phone +91-22-6119 8900
Israel
Phone +972 97110 11
Italy
Phone +39 02 27 43 41
Japan
Phone +81 3 5309 2112
Malaysia
Phone +603-8080 7425
Mexico
Phone +52 (472) 748 9451
Netherlands
Phone +31 (0) 30 229 25 44
New Zealand
Phone +64 9 415 0459
0800 222 278 – tollfree
Norway
Phone +47 67 81 50 00
Poland
Phone +48 22 539 41 00
Romania
Phone +40 356-17 11 20
Russia
Phone +7 495 283 09 90
Singapore
Phone +65 6744 3732
Slovakia
Phone +421 482 901 201
Slovenia
Phone +386 591 78849
South Africa
Phone +27 10 060 0550
South Korea
Phone +82 2 786 6321/4
Spain
Phone +34 93 480 31 00
Sweden
Phone +46 10 110 10 00
Switzerland
Phone +41 41 619 29 39
Taiwan
Phone +886-2-2375-6288
Thailand
Phone +66 2 645 0009
Turkey
Phone +90 (216) 528 50 00
United Arab Emirates
Phone +971 (0) 4 88 65 878
United Kingdom
Phone +44 (0)17278 31121
USA
Phone +1 800.325.7425
Vietnam
Phone +65 6744 3732
SICK AG, Erwin-Sick-Strasse 1, D-79183 Waldkirch
2006/42/EG
NO
SAFETY
  • Page 1 1
  • Page 2 2

SICK WTV2S-2 V-Optic Operating instructions

Type
Operating instructions

SICK WTV2S-2 V-Optic

The SICK WTV2S-2 V-Optic is a photoelectric proximity sensor with background suppression. It is used for the optical, non-contact detection of objects. The sensor has a sensing range of up to 36 mm and a light spot diameter of 2.5 mm at a distance of 20 mm. The sensor can be used in a variety of applications, including:

  • Object detection: The sensor can be used to detect the presence or absence of objects.
  • Obstacle avoidance: The sensor can be used to prevent objects from colliding with each other.
  • Counting: The sensor can be used to count objects as they pass through a sensing area.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI