Bounty Hunter Quick Silver Camo Owner's manual

Brand: Bounty Hunter

Model: Quick Silver Camo

Category: Measuring, testing & control

Type: Owner's manual

Bounty Hunter Quick Silver Camo is the perfect metal detector for beginners who want to find coins, relics, and jewelry. It features a 9-inch coil, digital target ID, and waterproof construction. It also features the latest target reject technology to help you eliminate unwanted items.

OWNER’S MANUAL

The

Quick

Silver is an

easy to use detector. The most difficult

aspects of metal detecting have been

automated.

However if you are new to the hobby, we strongly

recommend that you:

1) Adjust the Depth Selection to a low setting in

the event of false signals. The detector powers on

at 3/4 sensitivity; increase to full sensitivity after you

have become familiar with the detector.

2) Do not use indoors. This detector is for outdoor use only. Many

household appliances emit electromagnetic energy, which can

interfere with the detector. If conducting an indoor demonstration,

turn the sensitivity down and keep the search coil away from

appliances such as computers, televisions and microwave ovens.

If your detector beeps erratically, turn off appliances and lights.

Do not test by placing coins on the floor. Most floors contain metal

Keep the search coil away from objects containing metal, such as

floors and walls.

3) This is a MOTION detector.

You must sweep the searchcoil from side-to-side to detect metal.

A motionless searchcoil over a metal object will not result in detection.

4) Use 9-volt ALKALINE batteries only.

Do not use Heavy Duty Batteries or Ordinary Zinc-Carbon Batteries.

TABLE OF CONTENTS

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Assembly

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Batteries

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Quick-Start Demo

. . . . . . . . . . . . . . . . . . . . . .6-7

Basic Operation

Powering Up . . . . . . . . . . . . . . . . . . . . . . . .8

The Display . . . . . . . . . . . . . . . . . . . . . .8-10

Operating Controls . . . . . . . . . . . . . . . . . . . . . .11

Environmental Conditions . . . . . . . . . . . . . . . .12

Audio Target Identification

. . . . . . . . . . . . . . .13

Depth Select (Sensitivity Adjustment) . . . . . . .14

In The Field Techniques

. . . . . . . . . . . . . . .15-17

Trouble Shooting

. . . . . . . . . . . . . . . . . . . . . . .18

Metal Detecting Applications . . . . . . . . . . . . . .19

Treasure Hunter’s Code of Ethics

. . . .Back Cover

Warranty

. . . . . . . . . . . . . . . . . . . . . . .Back Cover

TERMINOLOGY

The following terms are used throughout the manual, and are standard

terminology among detectorists.

ELIMINATION

Reference to a metal being "eliminated" means that the detector will

not emit a tone, nor light up an indicator, when a specified object

passes through the coil’s detection field.

DISCRIMINATION

When the detector emits different tones for different types of metals,

and when the detector "eliminates" certain metals, we refer to this

as the detector "discriminating" among different types of metals.

Discrimination is an important feature of professional metal

detectors. Discrimination allows the user to ignore trash and

otherwise undesirable objects.

RELIC

A relic is an object of interest by reason of its age or its association

with the past. Many relics are made of iron, but can also be made

of bronze or precious metals.

IRON

Iron is a common, low-grade metal that is an undesirable target in

certain metal detecting applications. Examples of undesirable iron

objects are old cans, pipes, bolts, and nails.

Sometimes, the desired target is made of iron. Property markers,

for instance, contain iron. Valuable relics can also be composed of

iron; cannon balls, old armaments, and parts of old structures and

vehicles can also be composed of iron.

FERROUS

Metals which are made of, or contain, iron.

PINPOINTING

Pinpointing is the process of finding the exact location of a buried

object. Long-buried metals can appear exactly like the surrounding

soil, and can therefore be very hard to isolate from the soil.

PULL-TABS

Discarded pull-tabs from beverage containers are the most bothersome

trash items for treasure hunters. They come in many different shapes

and sizes. Pull-tabs can be discriminated, but some other valuable

objects can have a metallic signature similar to pull-tabs, and will also

be eliminated when discriminating out pull-tabs.

GROUND BALANCE

Ground Balancing is the ability of the detector to ignore, or "see

through," the earth’s naturally occurring minerals, and only sound

a tone when a metal object is detected.

ASSEMBLY

Assembly is easy and requires no tools.

●

1 Position the lower stem (the straight tube)

with the silver button toward the back.

Using the bolt and knurled knob,

attach the search coil to the

plastic extension protruding from

the lower stem.

●

2 Press the button on

the upper end of the

lower stem, and

slide the lower

stem into the

upper stem.

Adjust the stem to a

length that lets you maintain

a comfortable upright

posture, with your arm

relaxed at your side, and the

search coil parallel to the

ground in front of you.

●

3 Wind the cable securely around the stem.

●

4 Insert the plug into the

matching connector on

the back side of the

detector body. Be sure

that the key-way and

pins line up correctly.

Caution: Do not force the

plug in. Excess force

will cause damage.

To disconnect the

cable, pull on the

plug.

Do not pull

on the cable.

Connector

on back of

control

housing

IMPORTANT: Always use ALKALINE batteries only.

Do not use heavy duty batteries or ordinary zinc-carbon batteries.

Always remove the batteries for prolonged storage.

CHECK THE BATTERIES if your detector exhibits any of the following

symptoms:

●

1 The unit does not turn on.

●

2 Low speaker volume.

●

Unit beeps continuously or erratically.

The LOW BATTERY indicator will come on and stay on if the batteries are

discharged. You may notice erratic beeping if using with LOW BATTERY

illuminated.

Follow these steps to install the batteries.

●

1 Carefully remove the battery compartment door by pressing the release

clip on the right side of the door.

●

2 Snap one battery onto each of the terminals and place the batteries in-

side the compartment. Insert both of the batteries with terminals facing

outward.

●

Replace the

compartment

door by carefully

inserting oppo-

site side of clip

first. Then press

down on clip

side until battery

door snaps into

place.

BATTERIES

Release

Clip

Both Batteries

terminals

facing out

UICK-START DEMONSTRATION

I. Supplies Needed

• A Medium-Size Nail • A Quarter

• A Nickel • A Zinc Penny (dated after 1982)

II. Position the Detector

a. Place the detector on a

table, with the search coil

hanging over the edge.

(or better, have a friend

hold the detector, with

the coil off the ground)

b. Keep the search coil

away from walls, floors,

and metal objects.

c. Remove watches, rings and other jewelry or metal objects from

hands and wrists.

d. Turn off appliances or lights that cause electromagnetic

interference.

e. Pivot the search coil back toward the detector body.

III. Power Up

Press the ON

touchpad. The detector

will beep several times

and the sensitivity

setting will be indicated

on the right of the

display. Two

illuminated segments

indicates 3/4 sensitivity.

IV. Wave each Object over the Search Coil (

pass the flat side of the coins

parallel to the coil)

a.Notice a different tone for each object.

Low Tone: Nail

Medium Tone: Nickel & Zinc Penny

High Tone: Quarter

b.Motion is required. Objects must be in motion over the

search coil to be detected.

V. Press the TARGET REJECT

touchpad

a. An “X” will appear under

the IRON segment.

b. The “X” tell us that Iron

has been eliminated from

detection.

VI. Wave the Nail over the Search Coil

a. The Nail will not be detected.

b. The Nail has been "Discriminated Out."

VII. Wave the Quarter, Penny, and Nickel over the Search Coil

These non-ferrous objects will be detected with their own

distinctive tones.

VIII. Press the TARGET

REJECT

touchpad again

Another “X” will

illuminate under “AL ZN”.

IX. Wave all objects over the

Search Coil

The Zinc Penny will not be detected. Make sure the penny is post-

1982; these are made of Zinc. CAUTION: some zinc pennies

within 1/2” of the coin surface will induce a high tone.

X. Press the TARGET REJECT touchpad again

a. A third “X” appears.

b. Pass all object over the search coil.

The nail, penny, and nickel are all eliminated from detection.

XI. Press the TARGET REJECT touchpad to return the detector to all-

metals detection, with no “X”s illuminated.

UICK-START DEMONSTRATION (continued)

BASIC OPERATION

POWERING UP

Press the ON touch pad.

All display indicators will illuminate momentarily.

The inverted-pyramid depth-selection indicator on the right of the

display will stay illuminated.

UNDERSTANDING THE DISPLAY

●

1 DEPTH SELECT

The detector defaults to

3/4 sensitivity, indicated by

two illuminated segments.

To change the depth range

of the detector, and thus its

sensitivity to more deeply

buried objects, use the

DEPTH SELECT touch pad.

Each touch of DEPTH

SELECT toggles the detector among three different sensitivity settings.

The detector is at maximum depth capability when three depth

segments are illuminated on the right of the display.

At the maximum depth setting, the detector will detect a coin-sized

object buried approximately 6 1/2 inches beneath the surface. With

two depth segments illuminated, the detector’s depth range will be

reduced to 80%, and with one depth segment illuminated, the range

will be reduced to 65%.

A more detailed explanation of depth selection is found on page 14.

●

2 LOW BATTERY

The LOW BATTERY

indicator will illuminate

when the 9-volt batteries

are discharged to a level

of 6.8 volts.

Replace the batteries as

soon as possible after

receiving the low battery

indication. The detector

will begin to beep erratically and operate unreliably if continuing use

with discharged batteries.

To save on batteries, check each battery individually, as the two

batteries can discharge at different rates. When LOW BATTERY

illuminates, it is possible that only one of the batteries requires

replacement.

Under normal conditions, a set of batteries will last for approximately

16 hours in the field, depending upon the brand of battery.

●

3 PROBABLE TARGET

The four categories depicted across the top of the display

indicate the probable identification of buried, detected metal

objects. The search coil must be in motion over an object to

be detected. Alternatively, you can pass an object over a

motionless search coil to test your detector. One of the four

target indicators will illuminate, indicating the probable

identification of the object. The indicator will remain

illuminated until another object is detected.

You will encounter a never-ending variety of buried metal

objects. It is therefore impossible to accurately identify all

buried metal objects. The target identification system will

accurately identify the most common items.

BASIC OPERATION

continued

Commonly-found objects are classified into the four

categories as follows:

IRON ------------------------------------------------

Ferrous objects

Metals composed mostly or entirely of iron

Most very small metals objects

Small foil pieces; small gold pieces.

AL ZN ------------------------------------------------

Post-1982 pennies (are made of zinc, some zinc pennies will register

as coins within 1” of the coil)

Zinc coins, such as recent foreign currency

Most bottle screw caps

Large foil pieces

Many rings; most gold rings

Older pull-tabs (those which detach from the can)

AL 5¢ ------------------------------------------------

Large gold rings

Newer pull-tabs (those which stay connected to can)

Nickels

Large Aluminum Pieces

COINS ------------------------------------------------

Silver coins, like dimes and quarters

Copper pennies (pre-1982)

Very large metal objects like manhole covers.

●

4 REJECTED TARGET

When “X” appears under a target

category, objects falling into this

category are eliminated from

detection. This feature is

commonly referred to as target

discrimination.

With each press of the TARGET

REJECT touch pad, you will

progressively eliminate, from left to right, the common, less

desirable, targets. When all three “X” are illuminated, the next press

will erase all “X”s, returning the detector to all-metal detection status,

where all types of metals will be detected.

BASIC OPERATION

continued

BASIC OPERATION

continued

OPERATING CONTROLS

The Quick Silver is the most automated, easy-to-operate, professional

metal detector ever designed. It is designed for those who are new to the

hobby providing maximum basic target discrimination, while requiring

minimal operator adjustment.

DEPTH SELECT

With each press of the DEPTH

SELECT touch pad, the detector

toggles among three different

depth-detection levels. Each of

these sensitivity levels is

identified through the 3-segment

depth-select icon on the right of

the display.

When three segments are illuminated, the detector is at maximum

sensitivity. As you press the DEPTH SELECT touch pad, the detector

toggles among the three different sensitivity levels. A more detailed

explanation of depth selection is found on page 14.

TARGET REJECT

Upon power-up, all types of

metals are detected. The TARGET

REJECT touch pad allows the

user to eliminate undesirable

metals from detection.

With each press of the REJECT

TARGET touch pad, unwanted

metals are progressively

eliminated, from left to right on the display. When all three “X”s are

illuminated, the next press will erase all “X”s, returning the detector to all-

metal detection status, where all types of metals will be detected.

BASIC OPERATION

continued

ENVIRONMENTAL CONDITIONS

WATER HUNTING: Your Quick Silver is ideal for damp grass and shallow

water spots. the search coil is waterproof; the case and case-to-cable

connection is not. Be careful to keep the detector body dry.

saltwater, keep the search coil away from contact with the ground.

Contact with saltwater sands will cause the detector to beep falsely. For

best result in saltwater, eliminate IRON to reduce false signals caused by

conductive beach sands. Coil sweep technique is also important in

saltwater; keeping the coil submerged is better than dunking and lifting.

The detector needs time to readjust to the conductive salt water.

RED CLAY: The red clay earth found in the southwestern U.S. may

require a reduction in the DEPTH SELECT level if encountering false

signals. Coil sweep technique is also more critical in red clay; keep the

coil level with the ground. Do not lift the coil at the ends of your sweep.

Review coil sweep technique on page 15.

RED SANDS: Red sand found in desert locations will react like red clays,

so follow the same precautions as outlined in the paragraph above.

BLACK SANDS: The most promising gold prospecting locations can

contain large amounts of black sand. This black sand is the most

demanding detecting environment, and frequently requires a detector

costing thousands of dollars for the best results. Your Quick Silver will still

function in these conditions, but will usually require operation at reduced

sensitivity levels. If you receive constant false signals, reduce the

sensitivity or move to another area.

SAND: Dry beach sands are no problem for the Quick Silver. If the sand

is damp with saltwater, however, follow the precautions outlined under

saltwater above.

HOT AND COLD: Be patient if moving immediately between hot and

cold environments, like taking your detector from your air-conditioned

home into a blazing summer sun. The search coil is constructed of

copper wire which will expand and contract with temperature change.

Your detector may require 10 to 15 minutes to stabilize to the ambient

temperature.

AUDIO TARGET IDENTIFICATION

While the LCD (Liquid Crystal Display) is very accurate in identifying

buried objects, the user in the field does not always maintain the display

screen in his field of vision. Therefore, we have incorporated an audio

feedback mechanism to alert the user to the nature of buried objects.

This audio feedback system first alerts the user to the presence and

classification of objects, whose nature and location can be confirmed

using the LCD display.

The detector will sound one of three different tones, depending on the

type of metal detected.

BASS TONE

Ferrous objects, such as iron and steel, will induce a bass tone.

The smallest gold objects can also induce a bass tone.

MEDIUM TONE

Pull-tabs, newer pennies (post-1982), larger gold objects, zinc,

small brass objects, and most bottle screw caps will induce

medium tones. Many recent vintage foreign currencies will

induce medium tones. Medium tone objects will illuminate the

two center target indicators.

HIGH TONE

Silver and copper coins, larger brass objects, older pennies (pre-

1982), and highly oxidized metals will induce high tones.

Quarters, dimes and other precious coins fall into this category.

Audio Target Identification (ATI) classifies metals into four categories.

LOW TONE

Nails, Bottle Caps,

& Smaller Gold

MEDIUM TONE

Old & New Pull Tabs, Zinc

Pennies (Post 1982), Nickel,

Larger Gold Objects

HIGH TONE

Copper, Silver & Brass

Copper Pennies (Pre 1982)

DEPTH SELECT

(Sensitivity Adjustment)

Upon power-up, the detector defaults to 3/4 sensitivity. To increase to full

sensitivity, press the DEPTH SELECT touchpad once.

ELECTROMAGNETIC INTERFERENCE

The principle use for the Sensitivity Control is to eliminate

Electromagnetic Interference (EMI).

A hobby metal detector is an extremely sensitive device; the search coil

creates its own magnetic field and acts like an antenna. If your detector

beeps erratically when the search coil is motionless, the unit is probably

detecting another electromagnetic field.

Common sources of EMI are electric power lines, both suspended and

buried, motors, and household appliances like computers and

microwave ovens. Some indoor electronic devices, such as dimmer

switches used on household lighting, produce severe EMI and can cause

the detector to beep erratically. Other metal detectors also produce their

own electromagnetic fields; so if detecting with a friend, keep two metal

detectors at least 30 feet apart.

If the detector beeps erratically, REDUCE THE SENSITIVITY by using the

Depth Select Control.

SEVERE GROUND CONDITIONS

A secondary use for the Sensitivity Control is to reduce false detection

signals caused by severe ground conditions. While your Quick Silver

contains circuitry to eliminate the signals caused by most naturally

occurring ground minerals, 100% of all ground conditions cannot be

anticipated. Highly magnetic soils found in mountainous and gold-

prospecting locations can cause the detector to emit tones when metal

objects are not present. High saline content soils and sands can also

cause the detector to false.

If the detector emits false, non-repeatable, signals, REDUCE THE

SENSITIVITY.

MULTIPLE TARGETS

If you suspect the presence

of deeper targets beneath a

shallower target, reduce the

sensitivity to eliminate the

detection of the deeper

targets, in order to properly

locate and identify the

shallower target.

IN THE FIELD TECHNIQUES

When pinpointing a target, continue sweeping

as you walk around the target.

PINPOINTING

Accurate pinpointing takes practice

and is best accomplished by

“X-ing” the target area.

1. Once a buried target is indicated

by a good tone response,

continue sweeping the coil over

the target in a narrowing

side-to-side pattern.

2. Take visual note of the place on

the ground where the “beep”

sounds.

3. Stop the coil directly over this

spot on the ground.

COIL MOVEMENT

When swinging the coil, be

careful to keep it level with the

ground about 1/2 inch from the

surface. Never swing the coil like

a pendulum.

TARGET DEPTH ESTIMATION

After verifying a desirable

target, pass the coil again, but

raise the coil 1” over the

ground, progressively higher

with each sweep. Note the coil

elevation at which the signal

disappears. With practice, you

will be able to approximate

target depth.

WRONG

CORRECT

Swing the search coil slowly,

overlapping each sweep as you

move forward. It is important

to sweep the coil at a consistent

speed over the ground as you

search. After identifying a

target, your sweep technique

can help in identifying both the

location and the nature of the

target. If you encounter a weak

signal, try moving the coil in

short, rapid sweeps

over the target zone;

such a short rapid

sweep may provide

a more consistent

target

identification.

Most

worthwhile

objects

will

respond with a repeatable tone.

If the signal does not repeat

after sweeping the coil directly

over the suspected target a few

times, it is more than likely

trash metal.

Crossing the target zone with

multiple intersecting sweeps at

multiple angles is another way

to verify the repeatability of the

signal, and the potential of the

buried target. To use this

method, walk around the target

area in a circle, sweeping the

coil across the target

repeatedly, every 30 to 40

degrees of the circle, about ten

different angles as you walk

completely around the target.

If a high-tone target completely

disappears from detection at a

given angle, chances are that

you are detecting oxidized

ferrous metals, rather than a

silver or copper object. If the

tone changes at different

IN THE FIELD TECHNIQUES (continued)

WHAT

READS

LIKE THIS

…MAY

ACTUALLY

BE THIS

angles, you many have

encountered multiple objects.

If you are new to the hobby,

you may want to dig all targets

at first. With practice in the

field, you will learn to better

discern the nature of buried

objects by the nature of the

detector’s response.

You will encounter some false

signals as you proceed. False

signals occur when the detector

beeps, but no metal target is

present. False signals can be

induced by electromagnetic

interference, oxidation, or

highly mineralized ground

soils. If the detector beeps

once, but does not repeat the

signal with several additional

sweeps over the same spot,

there is probably no target

present.

When searching very trashy

ground, it is best to scan small

areas with slow, short sweeps.

You will be surprised just how

much trash metal and foil you

will find in some areas. The

trashiest areas have been

frequented by the most people,

and frequently hold the most

promise for finding the most

lost valuables. To make

searching easier in very trashy

areas, consider purchasing the

Bounty Hunter 4-inch Search

Coil. The 4-inch coil’s narrower

detection field can better

distinguish between two

objects in close proximity.

Also maintain the search coil

positioned just above the

surface of the ground, without

making contact with the

ground. Making contact with

the ground can cause false

signals.

IN THE FIELD TECHNIQUES (continued)

TROUBLE SHOOTING GUIDE

SYMPTOM CAUSE SOLUTION

Detector chatters • Using detector • Use detector

or beeps erratically indoors outdoors only

• Using detector near • Move away

power lines

from power lines

• Using 2 detectors in • Keep 2 detectors

close proximity at least 30’ apart

• Highly oxidized • Only dig up

buried object repeatable

signals

• Environmental •

Reduce sensitivity

electromagnetic until erratic

interference signals cease

Constant low tone •

Discharged batteries

• Replace batteries

constant repeating

tones

• Wrong type of • Use only 9V

batteries

alkaline batteries

LCD does not lock • Multiple targets •

Move coil slowly

on to one target ID present at different angles

or detector emits • Highly oxidized

multiple tones target

• Sensitivity set • Reduce sensitivity

too high

No power, no • Dead batteries • Replace batteries

sounds • Poor

battery

•

Check connections

contact

• Cord not connected

securely

• Not moving • Sweep search coil

Search Coil from side-to-side

TROUBLE SHOOTING

METAL DETECTING APPLICATIONS

COIN SHOOTING:

The most popular metal detecting activity.

Find coins where people congregate frequently. Many detectorists revisit the

same areas again and again to find a never-ending treasure trove as people

continue to lose valuables every day. Parks, fairgrounds, and play areas are

good choices. The most valuable old coins are frequently found in abandoned

home sites, or if you live on an older property, maybe in your own backyard.

Control settings required. Target-Reject at least 2-Xs to eliminate iron,

foil, and old pull tabs. Target-Reject all 3-Xs if you want to find only

copper and silver. If you search for nickels, remember that you will also

encounter some newer pull-tabs. Some newer pull-tabs have a metallic

signal indistinguishable from nickel.

RELIC HUNTING:

The most effective relic hunting is best accomplished after conducting historical

research. Visit your local library, or check the internet, for historical events in

your area. You can target specific areas and gain valuable insight into your local

history. Remember to ask permission and respect laws regarding private and

government property.

Control settings required. No X’s should be displayed. Do not

discriminate out any types of metals as many of the oldest relics contain

iron.

JEWELRY HUNTING:

This is the most challenging treasure hunt. Gold rings will register in the same

range as pull-tabs. Necklaces will register with zinc and foils. You will dig up

many trash items in your search for jewelry, but jewelry hunting holds the

most potential for reward. Please pick up and throw away those pull-tabs to

help clean the environment.

Control settings required. Target-Reject only the 1st X; eliminate IRON

only.

CACHE HUNTING:

A cache, pronounced “cash,” is a buried or hidden valuable stored inside a

case, can, strong box, or bag. A cache could be the loot from a bank robbery

or someone’s life savings. Caches can be hidden in floors or walls of an old

house, or buried nearby.

Control settings required. No X’s should be displayed. The container

holding the treasure will frequently be a ferrous object, so you want to

detect all types of metal objects.

OWNER’S MANUAL

The

Quick

Silver is an

easy to use detector. The most difficult

aspects of metal detecting have been

automated.

However if you are new to the hobby, we strongly

recommend that you:

1) Adjust the Sensitivity to a low setting in the

event of false signals. The detector powers on a

3/4 sensitivity; increase to full sensitivity after you have

become familiar with the detector.

2) Do not use indoors. This detector is for outdoor use only. Many

household appliances emit electromagnetic energy, which can

interfere with the detector. If conducting an indoor demonstration,

turn the sensitivity down and keep the search coil away from

appliances such as computers, televisions and microwave ovens.

If your detector beeps erratically, turn off appliances and lights.

Also keep the search coil away from objects containing metal, such as

floors and walls.

3) Read this manual. Most importantly, review the Quick-Start Demo

(p.6) and Basic Operation (p. 8-12).

Use 9-volt ALKALINE batteries only.

Do not use Heavy Duty or ordinary Zinc-carbon Batteries.

TREASURE HUNTER’S CODE OF ETHICS:

1. Respect the rights and property of others.

2. Observe all laws, whether national, state or local.

3. Never destroy historical or archaeological treasures.

4. Leave the land and vegetation as it was. Fill in the holes.

5. All treasure hunters may be judged by the example you set.

Always obtain permission before searching any site. Be

extremely careful while probing, picking up, or discarding trash

items. And ALWAYS COVER YOUR HOLES!

First Texas Products, LLC

1465-H Henry Brennan Dr.

El Paso, TX 79936

(915) 633-8354 MQSI 6/2008

Published by First Texas Products, L.L.C.

Bounty Hunter

is a registered trademark of First Texas Products, L.L.C.

www.detecting.com

Bounty Hunter Metal Detectors are warranted against

defects in workmanship or materials under normal

use for one year from date of purchase to the original

user. Liability in all events is limited to the purchase

price paid. Liability under this Warranty is limited to

replacing or repairing, at our option, any Bounty

Hunter Detector returned, shipping cost prepaid, to

First Texas Products, LLC. Damage due to neglect,

accidental damage or misuse of this product is not

covered by this warranty.

FIRST TEXAS PRODUCTS, LLC

5-YEAR LIMITED WARRANTY

Bounty Hunter Quick Silver Camo Owner's manual

Brand: Bounty Hunter

Model: Quick Silver Camo

Category: Measuring, testing & control

Type: Owner's manual

Download PDF

report

Bounty Hunter Quick Silver Camo Owner's manual

Bounty Hunter Quick Silver Camo Owner's manual

Related papers

Other documents