1
Caution:
1. IndoorandoutdoorsuseIP67.
2. Inputvoltage:220-240V/AC.
3. Bulbs:GX53Energysaving(max.11W)-orLEDbulbs.
This light xture is suitable for installation intosurfaces such as driveways, patios, paths,
deckingandgardenwalls.
Warning! The lens and front cover can become hot.
Please retain this instruction for future use.
Installation:
1. Makeaminimumof30cmgraveldrainageunderthebodyofthelamp.Testthedrainageby
llingthetubewithwater.Thetubeshouldbecompletelyemptywithin30minutes.
2. The top of the mains sleeve should be mounted ush to the surface (pic. 2) and then
concreted.Donotattempttoinstallduringinclementweatherconditions.
3. Insertthemainscable(usecableindiameter10-14mm)intothecablegland,connectitto
theterminalblockandtthelampintothehousing.Securetightlythecableglandnut(max.
4Nm).Nevercoverthevisiblepartofthettingwithsoil.
4. Itispossibletoconnectthemlikepicture5.
5. Screwthehousingtothesleeve.Laythediffuser.Overlapthestainlesssteelringandscrew
tightly.
6. Please be aware of the silicon ring of the glass. Do not install reversely otherwise the
waterprooffunctionwillbeaffected.
7. Whenreplacingthelamporduringmaintenance,pleasecleanupthesandordirtinsidethe
lamp.
8. The cable gland stopper must not break forlast connected lamp. If the cable has been
removedformaintenancepurpose, thisstoppermustputbackin the place,lost stopper
mightcausedwaterleakage.
We recommend all installation should be carried out by a qualied electrician. Before
installation,isolatethemainssupplylead.
Cableglandstopper
1 2 3 4
5
Recommendation! test for 30-60 minutes before closing the xture