3
No Plug (X) Plug (Y) Power Plug
1 3.5mm 1.35mm Red
2 4.0mm 1.7mm Yellow
3 5.5mm 1.7mm Yellow
4 4.8mm 1.7mm Yellow
5 5.5mm 2.1mm Blue
6 5.5mm 2.5mm White
7 6.3mm 3.0mm Green
8 6.0mm 4.3mm Black
External
diameter
(X)
Internal
diameter
(Y)
Step 2, Select the connector tip, plug it to the output cord of the adapter.
Step 3, Set the DC output Voltage.
The adapter has a switch that enables you select the appropriate voltage. Please refer
to the notebook you are powering to determine the correct voltage. The correct voltage
should be marked on the DC input Jack. If not, refer to the notebook manual to determine
the proper voltage settings. ALWAYS select the voltage closest to the devices original
requirement. Fox example, If your laptop required DC input 19.5 V, you can first try and
set the adapter to 19 V, or even try 20 V.
Caution:
1. Please consult your notebook manual and check that the supplied tips and required
voltage will work with your particular model.
2. Mark sure the polarity of the DC Connector is correctly plugged and select the correct
output voltage for your device before use.
3. Never use a power tip that is not compatible with your device.
4. Make sure your computer is turned off before connecting or disconnecting any display
peripherals.
5. Never use an extension cord or any attachment not provided in this pack.