Samsung SSG-5150GB User manual

Category
Stereoscopic 3D glasses
Type
User manual
English-1
English
3D Active Glasses
SSG-5150GB
User’s Guide
The TV user guide's description of this product may be not accurate, so
always refer to this guide.
Features
Samsung's SSG-5150GB 3D glasses enable you to view 3D images on your
3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via
the 2.4GHz RF band.
The Samsung 3D glasses are only compatible with Samsung D, E, ES,
F, FH, H, HU, J, JU and JS series 3D TV's that were released in 2011,
2012, 2013, 2014 and 2015. These 3D glasses cannot be connected to
other Bluetooth devices.
Parts
LED Indicator & Power Button
Liquid crystal shutter
Battery Cover
Replacing the Batteries
If the red LED blinks every two seconds continually, replace the battery with
a new one.
Find the battery
holder on the inside
of the glasses.
Replace a new
battery in the
battery holder and
insert it into the
glasses.
Insert a coin into
the groove and turn
the battery holder
counterclockwise.
Insert a coin into
the groove and
turn the battery
holder clockwise
to lock it.
Tilt the glasses
downwards to
separate the battery
from the glasses.
Make sure that
the battery is held
firmly in place.
Use a coin when changing batteries. Using other tools may damage the
groove on the battery holder.
Insert the "+" side of the battery into the side marked with "+" in the
battery compartment.
To check the remaining battery capacity, refer to the pairing section in
this manual.
Pairing 3D Active Glasses
What is Pairing?
Pairing is the process of connecting 3D glasses and a 3D TV so that the two
devices can exchange data.
Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm)
apart from each other while pairing is in progress.
Turning the glasses on
Press the power button briefly. The green LED turns
on for 3 seconds. (Make sure that 3D is activated
on the TV before using the 3D glasses.)
Turning the glasses off
Press the power button briefly. The red LED turns on for 3 seconds.
Performing the pairing process
Turn the TV on and let it power up completely. Press and hold the Power
button on the glasses. The green and the red LEDs blink alternately for 2
seconds.
Operating range
2 – 6 m
50 cm
Recommended viewing distance
Recommended pairing distance
Recommended viewing distance
2
6 m (6 to 19.5 ft)
Recommended pairing distance
50 cm or less (about 20 in)
Once the 3D glasses are paired, the remaining battery capacity is displayed
on the TV screen. (This feature only applies to Samsung F series 3D TVs and
3D glasses that have been available since 2013.)
If you keep trying to pair the glasses and the TV after pairing has failed, the
battery level will decrease significantly. However, the battery level will recover
to a certain degree in about a minute.
The working distance is affected by the presence of obstacles (a person,
metal, walls, etc.) between the glasses and the TV and the strength of the
Bluetooth signal.
Turn off the 3D glasses when they are not in use. If you leave the 3D glasses
on, the battery lifespan decreases.
Pairing steps
1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.
2. Press the power button on the 3D glasses briefly. The 3D glasses will
power on and pairing will start.
3. The message “3D glasses are connected to TV.” will be displayed on
the TV screen when the pairing is successfully completed.
If pairing fails, the 3D glasses will power off.
If the first attempt to pair fails, power the TV off and on again and
perform step 2.
How to pair again: Press the power button on the 3D glasses for
more than 1 second.
Pairing is needed again in the following situations:
If the 3D glasses do not function, even when the power button is pressed,
especially if the TV has just been a repaired.
If you want to play 3D content on another Samsung 3D TV model that
belongs to the D, E, ES, F, FH, H, HU, J, JU or JS series released in 2011
through 2015. You must pair the glasses with the other TV.
Viewing guidelines
In 3D view mode, the screen may flicker under florescent lighting (50Hz ~
60Hz) or three-wave lighting.
In this case, it is advisable to turn off the lighting or adjust it to a low level.
When switching the picture mode from 3D view, the 3D view mode turns
off, and the 3D glasses fail to operate, resulting in the display not operating
properly.
Then, the 3D glasses turn off.
If you lie on your side while watching TV with the 3D glasses, the picture may
look darker or may not be visible.
If the 3D glasses are defective or damaged, they cannot be repaired and
should be exchanged for a new pair. The repair service is free of charge
within the warranty period, which, however, does not cover damage from the
user's fault.
The actual 3D effect may be experienced differently depending on the
viewer. The 3D effect may not be experienced by a person who has a great
difference of vision in the left and right eyes.
In 3D view mode, it is advisable to watch TV within the recommended
distance.
The 3D function of the glasses may not work properly if you are out of
the recommended distance for about 3 seconds.
If you stay out of the recommended range, the 3D glasses lose the
wireless communications with the TV, and then the display turns off in
few seconds before the glasses turn off.
SSG-5151GB_XC_InBox_BN68-05527C-00_L04.indb 1 2016-03-10 오후 1:11:32
English-2
The 3D glasses may not work properly if there are any nearby active 3D
devices or electronic or wireless communication devices (for example, a
device that uses the 2.4GHz or 5GHz frequency range such as a microwave
or AP). In this case, move the devices away from the 3D glasses.
The 3D Glasses may not work properly near metal objects or in an
electromagnetic field. In this case, move the metal objects or the
electromagnetic device away from the 3D glasses.
The vividness of the image may be deteriorated if you watch TV in a location
that is exposed to direct sunlight or illumination.
CAUTION!
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D IMAGES.
READ THE FOLLOWING CAUTIONS BEFORE YOU OR YOUR CHILD
USE THE 3D FUNCTION.
Adults should frequently check on children who are using the 3D function. If
there are any complaints of tired eyes, headaches, dizziness or nausea, stop
the child from viewing the 3D TV and ensure that they rest.
Do not use the 3D glasses for any purpose other than the intended purpose,
such as general eyeglasses, sunglasses, protective goggles.
Some viewers may experience discomfort such as dizziness, nausea and
headaches while viewing 3D TV. If you experience any of these symptoms,
stop watching the 3D content, remove the 3D glasses, and take a rest.
An extended period of watching TV in 3D view mode may cause eye fatigue.
In this case, stop watching the 3D content immediately, take off the 3D
glasses and allow your eyes to rest.
Do not use the 3D function or the 3D glasses while walking or moving
around. Wearing the 3D glasses while moving around may result in injury due
to running into objects, tripping and/or falling.
If you sleep with the 3D glasses on, the temples on the glasses may become
broken.
The temples of the 3D glasses are unfolded. Do not attempt to fold the
temples with excessive force. Folding the temples with excessive force may
damage the 3D glasses.
There is a danger of explosion if the battery is incorrectly replaced.
Make sure to replace the battery with the same type.
SAFETY PRECAUTIONS
The following safety instructions are to ensure your personal safety and
prevent property damage. Please read them to ensure the proper use of
the product.
Do not place the product in a location exposed to direct sunlight, heat, fire,
or water. Exposure may result in a product malfunction or fire.
Do not apply force to the lenses of the 3D glasses. Do not drop or bend
the product. Applying force, dropping, or bending may result in a product
malfunction.
Keep components of the 3D glasses out of reach of children, and especially
ensure children do not swallow one of the components. If your child
swallowed a component, consult your doctor immediately.
When cleaning the product, do not spray water or cleaner directly onto the
surface of the product. Spraying water or cleaner directly onto the glasses
may result in fire or electric shock, damage to the product's surface, or
cause the indicator labels on the product's surface to come loose.
Do not apply chemicals containing alcohol, solvent, or surfactant such as wax,
benzene, thinner, pesticide, air freshener, lubricant, or cleaner to the product.
These chemicals may cause the product's exterior to be discolored or
cracked, or labels or instructions to be removed. Use only a soft cloth such as
superfine fibers or cotton flannels for cleaning the product as the surface or the
lenses easily cracks. Because the product can be easily scratched with foreign
substances, make sure to dust off the cloth before using.
Do not sleep while wearing the 3D glasses. Wearing the 3D glasses while
sleeping may damage them.
Do not disassemble, repair, or modify the 3D glasses by yourself. Do not use
a product that is damaged.
Take care that you do not injure your eyes with the edges of the frame of the
3D glasses when wearing them.
Put the 3D glasses on and take them off with both hands.
Use only approved batteries, and make sure to insert the batteries in the
correct polarities. If the batteries are replaced in the wrong polarities, the
batteries may implode or leak its internal chemicals, which may cause fire,
inflict injury on users, or contaminate (damage) its environment.
Keep the removed batteries out of childrens' reach to prevent children from
swallowing them. If they swallow them, consult with a doctor immediately.
Swallowing the cylindrical (button type) battery can cause serious damage to
your internal organs. If this happens, contact a doctor immediately.
Troubleshooting
If you encounter... Try this...
My 3D glasses do not
work.
Replace the battery.
The 3D glasses should be close to the TV. Make
sure that the distance between the TV and
your 3D glasses is less than 19.5 feet (6m) in a
straight line.
Check the 3D function settings of your TV.
The LED keeps blinking
The battery is dead. Replace the battery.
Specifications (Model Number: SSG-5150GB)
Optics
Shutters Liquid crystal Transmittance 36 ± 2%
Recommended
viewing
distance
6.5 to 19.5 ft
(2 – 6 m)
Field Rate
120
fields / s
Weight Glasses
21g / 0.74 oz. (including the battery: 22 g ±
0.5 g / 0.77 ± 018 oz.)
Power Glasses
One 3 V lithium / manganese dioxide
battery 3 V (CR1620)
Power
Consumption
Glasses 0.85 mA (Average)
Battery
Type 70 mAh, 3.0 V (CR1620)
Operating
time when On
70 hours
Operating
Conditions
Operating
Temperature
50°F – 104°F (10°C – 40°C)
Custody
Temperature
-4°F – 113°F (-20°C – 45°C)
Product specifications may be changed without notice in order to
enhance product performance.
The continuous operating time may differ depending on the wireless
communication environment and usage conditions.
[Recommendation] - EU ONLY
Hereby, Samsung Electronics, declares that this
equipment is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
The official Declaration of Conformity may be found
at http://www.samsung.com, go to Support >Search
Product Support and enter the model name.
This equipment may be operated in all EU countries.
[
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
[The 3D Glasses Supplied with] This product contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can
lead to death. Keep new and used batteries away from children. If the battery compartment
does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
[
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCIONS
SSG-5151GB_XC_InBox_BN68-05527C-00_L04.indb 2 2016-03-10 오후 1:11:33
This page is intentionally
left blank.
SSG-5151GB_XC_InBox_BN68-05527C-00_L04.indb 9 2016-03-10 오후 1:11:40
This page is intentionally
left blank.
SSG-5151GB_XC_InBox_BN68-05527C-00_L04.indb 10 2016-03-10 오후 1:11:40
This page is intentionally
left blank.
SSG-5151GB_XC_InBox_BN68-05527C-00_L04.indb 11 2016-03-10 오후 1:11:40
BN68-05527C-00
Samsung Electronics (UK) Ltd, Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG United Kingdom
Declaration of Conformity
Manufacturer
Samsung Electronics Co., Ltd.
Product details
For the following
Product : 3D Glasses
Basic model(s) : SSG-5150GB
Variant Model(s) :
Declaration & Applicable standards
We hereby declare that the product above is in compliance with the essential
requirements of R&TTE Directive (1999/5/EC) by application of
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62311:2008
EN 301 489-1 v.1.9.2
EN 301 489-17 v.2.2.1
EN 300 328 v.1.9.1
and the Directive (2011/65/EU) on the restriction of the use of certain hazardous
substances in electrical and electronic equipment by application of EN 50581:2012.
Representative
Representative in the EU
Samsung Electronics Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG, UK
2016-03-16 Stephen Colclough / EU Representative
(Place and date of issue) (Name and signature of authorized person)
* It is not the address of Samsung Service Centre. Please see the address or the phone
number of Samsung Service Centre in the warranty card or contact the retailer where you
purchased your product.
05_Contact.indd 12 2016-03-29 �� 10:16:40
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Samsung SSG-5150GB User manual

Category
Stereoscopic 3D glasses
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI