2. Computers & electronics
  3. Audio & home theatre
  4. Dictaphones
  5. Tascam
  6. AUDIO RECORDER

Tascam AUDIO RECORDER Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Tascam AUDIO RECORDER Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
• Install two AA batteries in the recorder’s rear
sliding compartment. An on-screen indicator
will display the battery level.
• Insert a microSD card facedown into the right
side panel until it clicks into place.
• To turn on the recorder, press Home for about
two seconds.
• To prepare to record, press Record. The recorder
will enter standby mode. Write down the le
name of the recording for reference.
• With the recorder in standby mode, set the input
level to “auto.” From the home screen, press
Quick, select “level control,” then press Play.
Press + and − to select “auto levels,” then press
Play. An icon in the upper-left
corner of the display will
indicate that the recorder is
in auto level mode.
AUDIO RECORDER INSTRUCTIONS
• Place the recorder as close to the subject as
possible, with one microphone facing him or
her and one facing you. Eliminate background
noise if possible.
• Press + and − to adjust the volume.
• To begin recording, press Record again. The red
indicator will light continuously.
• To stop recording, press Stop/Home. The audio
le will be saved.
• To play back a le, press Forward and Back to
nd the le, then press Play.
• To delete a le, press Forward and Back to locate
the le. Then press Quick and Play to delete.
Conrm the deletion, and press Play again.
• To turn off the recorder, hold down Home for
about two seconds.
• To download your audio les, connect the
recorder to a computer with the included USB
cable.
© 2013 by Intellectual Reserve, Inc. All rights reserved. Printed in the USA. English approval: 2/13
/