1.1 Take the product and accessories out from box. Remove all protection pieces from the product LCD and
camera lens.
1.2 Install a class⑥ or above Micro SD / TF card into the card slot. The device cannot record without an
available Micro SD /TF card. Highly recommend to format the card before use.
1.3 Install the sucker-disc holder to car front window. Then,
screw the product into the holder.
A middle, high and no deprive space is best for video
recording effect.
1.4 Plug the attached car-mounted power adaptor into lighter
charger port of your car. Then, connect the USB side to the
product USB port. Suggest to arrange and hide the cable
as right figure.
1.5 When your car starts, the product will power on and start recording automatically.
2.1 Correct date and time information is important for videos. Please setup correct date & time when first
time to use.
2.2 To setup date and time, please press OK button to stop recording.
2.3 While the product is NOT recording or playing back, press SETUP button twice. Setup menu will display
on the LCD screen.
2.4 Use Up/Down button to high light the Date/Time option. Press OK to setup.
2.5 Use Up/Down button to change the date and time. Press OK to setup next.
2.6 After everything is correct, Press Setup button to save and exit to previous mode.
3.1 The device can automatically power on to record if there is power and a TF card installed.
3.2 If you want to start recording manually, you can manually power off and power on the product by long
pressing the Power button.
3.3 Adjust the sucker holder space and angle for best video vision. Then, make all screws tight.
3.4 Press OK button to manually stop recording. Then, press Mode button to Playback mode.
3.5 In Playback mode, the first screen of the last video will display on LCD. Use Up and Down button to
select one video, press OK button to playback it.
3.6 While playing back a video, the Up/Down buttons will be Fast Reverse/ Fast Forward function. The OK
button will be Pause/Continue function.
3.7 When playback is paused, press Mode button to Video mode. Then, press OK button to continuous
recording.
NOTICE: A USB POWER SUPPLY IS MUST FOR RECORDING. OTHERWISE, THE PRODUCT CAN ONLY
SETUP/PLAYBACK.
4.1 The product will power off automatically if you turn off your car. You can also long press the power
button to power off manually.
4.2 There are two ways to upload the recorded files to your computer: Take the TF card out from the slot
and insert it into your TF card reader.
4.3 You can also take the product off from your car and connect it to your computer via a micro USB cable.
The LCD will display a list. Use Up/Down key to high light Mass Storage and Press OK to select. Your
computer will install driver for the device quickly and the LCD display “USB Connected”.
4.4 In “My Computer”, you will find a new drive. Now you can playback, copy and even edit the video
files as you want.
Status of the
product
Power/Lock
key
Up
Down
Mode
Setup
OK
Recording
Short press to
lock/unlock
current video
Zoom In
Zoom Out
N/A
Disable / Enable
microphone
Stop
Recording
Recording
stopped
Long press to
power off.
Zoom In
Zoom Out
Short press to
toggle between
Video/Playback
Short press to Video
setting menu
Short press twice to
Setup menu
Start
Recording
Playback
mode
(Display the
last Video)
Long press to
power off.
Previous
video
Next video
Short press to
toggle between
Video/Playback
Playback menu
Start playback
Playing back
Long press to
power off.
Fast Reverse
Fast
Forward
-
-
Pause the
playback
Playback
paused
Long press to
power off.
Previous
video
Next video
Short press to
toggle between
Video/Playback
Playback menu
Start playback
-
1
-
2
