Brother XL-2600/2600i/2610 User manual

XL_brother_cover_Eng-Spa

ENGLISH/SPANISH

885-S25/S27

XC8346-021

Printed in China

6

5

4

3

2

1

Operation Manual

Manual de Instrucciones

SEWING BUTTONHOLES AND

BUTTONS

COSTURA DE OJALES Y

BOTONES

PUNTADAS DE COSTURA

INCORPORADAS

BUILT-IN STITCHES

ANEXO

APPENDIX

USING ATTACHMENTS AND

APPLICATIONS

USO DE ACCESORIOS Y

APLICACIONES

STRAIGHT AND ZIGZAG

STITCHING

COSTURA RECTA Y EN ZIG-ZAG

KNOWING YOUR SEWING

MACHINE

CONOZCA SU MÁQUINA DE

COSER

1

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic safety precautions should always be taken, including the following:

Read all instructions before using.

DANGER

-

To reduce the risk of electric shock:

1. The machine should never be left unattended while plugged in. Always unplug the machine

from the electrical outlet immediately after using and before cleaning.

2. Always unplug the machine before you change the light bulb.

Replace the bulb with same type rated 15 watts.

WARNING

-

To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Do not allow this machine to be used as a toy. Close attention is necessary when the machine is

used by or near children.

2. Use this machine only for its intended use as described in this manual. Use only accessories

recommended by the manufacturer as contained in this manual.

3. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water. Return the machine to the nearest authorized

dealer or service center for examination, repair, electrical or mechanical adjustment.

4. Never operate the machine with any air openings blocked. Keep ventilation openings of the

machine and foot control free from the accumulation of lint, dust, and loose cloth.

5. Never drop or insert any object into any opening.

6. Do not use outdoors.

7. Do not operate where aerosol (spray) products are being used or where oxygen is being

administered.

8. To disconnect, turn the machine switch to the symbol “{” position which represents off, then

remove plug from outlet.

9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the machine needle.

11. Always use the proper needle plate. The wrong plate can cause the needle to break.

12. Do not use bent needles.

13. Do not pull or push fabric while stitching. It may deflect the needle, causing it to break.

14. Switch the machine to the symbol “{” position to turn it off when making any adjustments in the

needle area, such as threading needle, changing needle, threading bobbin, or changing presser

foot, and the like.

15. Always unplug the machine from the electrical outlet when removing covers, lubricating, or

when making any other user servicing adjustments mentioned in the instruction manual.

16. This sewing machine is not intended for use by young children or infirm persons without

supervision. (For Australia and New Zealand only)

17. Young children should be supervised to ensure that they do not play with this machine.

SAVE THESE INSTRUCTIONS

This machine is intended for household use.

XL2600_US-Sp.book Page 1 Thursday, November 4, 2004 11:41 AM

Page is loading ...

3

FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY

If this machine is fitted with a three-pin non-rewireable BS plug then please read the following.

IMPORTANT

If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut

off and an appropriate three pin plug fitted. With alternative plugs an approved fuse must be fitted in

the plug.

NOTE: The plug severed from the main leads must be destroyed as a plug with bared flexible cords is

hazardous if engaged in a live socket outlet. In the event of replacing the plug fuse, use a fuse

approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug.

Always replace the fuse cover. Never use plugs with the fuse cover omitted.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED

WITH THE LETTER ‘E’, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND

YELLOW.

The wires in this main lead are coloured in accordance with the following code:

Blue Neutral

Brown Live

As the colours of the wiring in the main lead of this appliance may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter

‘N’ or coloured black or blue.

The wire which is coloured brown must be connected to the terminal which is marked with the letter

‘L’ or coloured red or brown.

XL2600_US-Sp.book Page 3 Thursday, November 4, 2004 11:41 AM

4

UNPACKING/REPACKING INSTRUCTIONS

INSTRUCCIONES PARA EL DESEMBALAJEY EL REEMBALAJE

Keep the carton and packing materials. You may have to take or send the machine to be repaired. If you do not

pack it properly, or do not use the right packing material, the machine could be damaged.

Please follow the diagram below to unpack and repack the machine.

Guarde el cartón y los materiales de embalaje. Puede que tenga que llevar o enviar la máquina al servicio de

reparaciones. Si no la empaqueta correctamente, o no utiliza el material de embalaje adecuado, la máquina

podría dañarse.

Para desembalar y reembalar la máquina, consulte el diagrama que se muestra a continuación.

PLEASE READ THESE INSTRUCTIONS BEFORE YOU USE THE MACHINE.

To use the machine safely

1. Make sure you watch the needle carefully while you are sewing. Do not touch the handwheel,

thread take-up lever, needle, or other moving parts.

2. Turn off the main power and unplug the cord in the following circumstances:

•When you have stopped using the machine

•When you are replacing or removing the needle or any other part

•If there is a power failure while you are using the machine

•If you are checking or cleaning the machine

•Leaving the machine unattended

3. Do not store anything on the foot controller.

4. Plug the machine directly into the wall. Do not use extension cords.

To give your machine a longer life

1. Do not store this machine in direct sunlight or in high humidity conditions. Do not use or store

the machine near a heater, iron, halogen lamp or other hot objects.

2. Use only mild soaps or detergents to clean the case. Benzene, thinner, and scouring powders

can damage the case and machine, and should never be used.

3. Do not drop or hit the machine.

●

This packing material is designed to prevent damage. Save this packing material if you need to

take or send this machine to be repaired.

●

Este material de embalaje está diseñado para evitar daños. Guarde este material por si tuviera

que llevar o enviar la máquina al servicio de reparaciones.

IMPORTANT/IMPORTANTE

XL2600_US-Sp.book Page 4 Thursday, November 4, 2004 11:41 AM

5

4. Always consult this manual before you replace or fit presser feet, the needle, or any other parts to

make sure you fit them correctly.

To repair or adjust the machine

If the machine breaks down or needs adjustment, first follow the troubleshooting table in the

Appendix to inspect and adjust the machine yourself. If the problem is still there, consult your local

authorized dealer.

For additional product information and updates, visit our web site at www.brother.com.

The contents of this manual and specifications of this product are subject to change without notice.

LEA ESTAS INSTRUCCIONES ANTES DE UTILIZAR LA MÁQUINA.

Para utilizar la máquina de forma segura

1. Esté siempre atento a la aguja mientras cose. No toque la rueda, el tirahilo, la aguja u otras piezas

móviles.

2. Apague la máquina y desenchufe el cable de la corriente en las situaciones siguientes:

• Cuando deje de utilizar la máquina.

• Cuando cambie o retire la aguja u otras piezas.

• Cuando se produzca un fallo eléctrico mientras está utilizando la máquina.

• Cuando revise o limpie la máquina.

• Cuando deje la máquina desatendida.

3. No deje ningún objeto encima del pedal.

4. Enchufe la máquina directamente a la toma de corriente de la pared. No utilice alargadores.

Para prolongar la duración de la máquina

1. No exponga la máquina a la luz solar directa ni la coloque en lugares con gran humedad. No

utilice o guarde la máquina cerca de una fuente de calor, plancha, lámpara halógena u otros

objetos candentes.

2. Utilice sólo detergentes o jabones suaves para limpiar la carcasa. Gasolina, diluyentes y polvos

desengrasantes pueden dañar la carcasa y la máquina, por lo que nunca debe utilizarlos.

3. No deje caer la máquina ni la golpee.

4. Consulte siempre este manual antes de sustituir o colocar el pie prensatela, la aguja o cualquier

otra pieza, para asegurarse de que se colocan de la forma adecuada.

Para reparar o ajustar la máquina

Si la máquina se estropea o es necesario ajustarla, consulte en primer lugar la tabla de solución de

problemas que figura en el Anexo para inspeccionarla y ajustarla usted mismo. Si el problema

continúa, póngase en contacto con su distribuidor autorizado más cercano.

Si desea obtener información adicional del producto y actualizaciones, visite nuestro sitio Web

en www.brother.com.

El contenido de este manual y las especificaciones de este producto están sujetos a cambios sin

previo aviso.

XL2600_US-Sp.book Page 5 Thursday, November 4, 2004 11:41 AM

6

CONTENTS

1. KNOWING YOUR SEWING MACHINE ........................................................10

THE MAIN PARTS .............................................................................................................10

ACCESSORIES ...................................................................................................................12

Optional Accessories ...................................................................................................................................... 13

USING YOUR SEWING MACHINE ...................................................................................14

Connecting Plugs ............................................................................................................................................ 15

Main Power and Sewing Light Switch ............................................................................................................. 15

Foot Controller ................................................................................................................................................ 15

Checking the Needle ....................................................................................................................................... 16

Replacing the Needle ...................................................................................................................................... 16

Changing the Presser Foot ............................................................................................................................... 18

Flat Bed Attachment ........................................................................................................................................ 19

Using a Free-arm Style .................................................................................................................................... 19

THE CONTROLS ...............................................................................................................20

Pattern Selection Dial ...................................................................................................................................... 20

Patterns and Stitch Names ............................................................................................................................... 21

Stitch Length Dial ............................................................................................................................................ 24

Stretch Stitching .............................................................................................................................................. 24

Stitch Width Dial ............................................................................................................................................ 25

Reverse Sewing Lever ...................................................................................................................................... 25

THREADING THE MACHINE ............................................................................................26

Winding the Bobbin ........................................................................................................................................ 26

Lower Threading ............................................................................................................................................. 28

Lower Threading (for models equipped with a quick-set bobbin) .................................................................... 30

Upper Threading ............................................................................................................................................. 32

Using the Needle Threader (for models equipped with a needle threader) ....................................................... 34

Drawing up the Lower Thread ......................................................................................................................... 36

Sewing with a Twin Needle ............................................................................................................................ 36

Thread Tension ............................................................................................................................................... 38

FABRIC, THREAD, AND NEEDLE COMBINATIONS .........................................................39

2. STRAIGHT AND ZIGZAG STITCHING .........................................................41

Please Read Before Sewing ............................................................................................................................. 41

Straight Stitching ............................................................................................................................................. 41

Zigzag Stitching .............................................................................................................................................. 43

3. BUILT-IN STITCHES ......................................................................................45

Blind Hem Stitching ........................................................................................................................................ 45

Shell Tuck Stitching ......................................................................................................................................... 46

Elastic Stitching ............................................................................................................................................... 46

Double Action Stitching .................................................................................................................................. 47

Patchworking .................................................................................................................................................. 48

Overedge Stitching .......................................................................................................................................... 48

Feather Stitching ............................................................................................................................................. 49

Triple Zigzag Stretch Stitching ......................................................................................................................... 50

Decorative Stitching ........................................................................................................................................ 50

4. SEWING BUTTONHOLES AND BUTTONS ..................................................52

Making a Buttonhole ....................................................................................................................................... 52

Adjusting Buttonholes ..................................................................................................................................... 54

Sewing Buttons ............................................................................................................................................... 55

XL2600_US-Sp.book Page 6 Thursday, November 4, 2004 11:41 AM

7

5. USING ATTACHMENTS AND APPLICATIONS .............................................56

Zipper Insertion ............................................................................................................................................... 56

Gathering ........................................................................................................................................................ 57

Darning ........................................................................................................................................................... 58

Appliqués ........................................................................................................................................................ 58

Monogramming and Embroidering .................................................................................................................. 59

OPTIONAL ACCESSORIES ................................................................................................62

Using the Walking Foot ................................................................................................................................... 62

Using the Quilting Foot ................................................................................................................................... 63

Using the 1/4-inch Quilting Foot ..................................................................................................................... 65

Using the Narrow Hemmer Foot ..................................................................................................................... 65

Using the Blind Stitch Foot .............................................................................................................................. 67

6. APPENDIX .....................................................................................................69

MAINTENANCE ................................................................................................................69

Changing the Light Bulb .................................................................................................................................. 69

Cleaning ......................................................................................................................................................... 70

Troubleshooting .............................................................................................................................................. 72

INDEX ...............................................................................................................................79

XL2600_US-Sp.book Page 7 Thursday, November 4, 2004 11:41 AM

Page is loading ...

KNOWING YOUR SEWING MACHINE / ————————————————————————————————————————————

—

10

KNOWING YOUR SEWING MACHINE

THE MAIN PARTS

1 Bobbin winder (page 26)

This winds the thread onto the bobbin for use as the

lower thread.

2 Spool pin (page 27, 32)

This holds the spool of thread.

3 Thread guide (page 27, 32)

This is used when winding the thread onto the bobbin

and then threading the machine.

4 Thread take-up lever (page 33)

5 Hole for extra spool pin (page 37)

This holds a second spool of thread for sewing with the

twin needle.

6 Stitch width dial (page 25)

This controls the stitch width.

7 Upper tension-control dial (page 38)

This controls the tension of the upper thread.

8 Thread cutter (page 43)

Pass the threads through the thread cutter to cut them.

9 Needle threader (page 34)

(This is only available on certain models.)

0 Quick-set bobbin (page 30)

(This is only available on certain models.)

A Flat bed attachment with accessory compartment

(page 19)

B Presser foot (page 18)

C Reverse sewing lever (page 25)

You can push this to stitch in the reverse direction.

D Pattern selection dial (page 20)

You can turn this in either direction to choose the stitch

you want.

E Stitch length dial (page 24)

This controls the stitch length.

F Buttonhole fine-adjustment screw (page 54)

G Handwheel

Used to manually raise and lower the needle.

H Main power and sewing light switch (page 15)

You can turn the main power and sewing light switch

on and off.

I Foot controller jack / socket (page 15)

Plug in the foot controller plug and connect the

machine to the power supply.

J Presser foot lever (page 32)

Used to raise and lower the presser foot.

K Foot controller (page 15)

You can use this to control the sewing speed, and to

start and stop sewing.

Parts Code for Zigzag Presser Foot: XC4901-051

Foot Controller: Model KD-1902

Parts Code: XC7359-021 (110/120V Area)

XC7438-221 (220/240V Area)

XC7456-221 (U.K.)

XC7455-021 (Australia, New Zealand)

6

2

1

0

5

9

7

8

A

C

D

E

F

3

G

H

J

I

4

B

K

1

XL2600_US-Sp.book Page 10 Thursday, November 4, 2004 11:41 AM

Page is loading ...

KNOWING YOUR SEWING MACHINE / CONOZCA SU MÁQUINA DE COSER ————————————————————————————

—

12

ACCESSORIES / ACCESORIOS

The following accessories are stored in the flat bed attachment. We have designed these accessories to help you

be able to carry out most sewing tasks.

Los siguientes accesorios se encuentran en la unidad de cama plana. Hemos diseñado estos accesorios para

ayudarle a realizar la mayoría de las tareas de costura.

Note

/

Nota

● The included accessories vary depending on the machine model.

● Los accesorios incluidos varían según el modelo de la máquina.

1. 2. 3. 4. 5.

6. 7. 8. 9.

No. Part Name

Part Code

No. Part Name

Part Code

USA Others USA Others

1 Zipper foot (1 pc.) X59370-021 5 Buttonhole Foot (1 pc.) X59369-321

2 Bobbin (3 pcs.) SA156

SFB:

XA5539-151

6 Button Sewing Foot (1 pc.) X59375-121

7 Extra Spool Pin (1 pc.) 130920-021

3

Needle Pack (Regular Single

Needle HAX130 (3 pcs.))

129583-021 8 Screwdriver (1 pc.) X55467-021

4 Twin Needle (1 pc.) X57521-021 9 Darning Plate (1pc.) XC6063-021

Nº Nombre de la pieza

Código de la pieza

Nº Nombre de la pieza

Código de la pieza

EE.UU. Otros EE.UU. Otros

1

Pie para cremalleras (1

unidad)

X59370-021 5 Pie para ojales (1 unidad) X59369-321

2 Bobina (3 unidades) SA156

SFB:

XA5539-151

6

Pie especial para botones

(1 unidad)

X59375-121

7

Portacarrete adicional

(1 unidad)

130920-021

3

Paquete de agujas (agujas

simples normales HAX130 (3

unidades))

129583-021 8 Destornillador (1 unidad) X55467-021

4 Aguja gemela (1 unidad) X57521-021 9 Placa de zurcir (1 unidad) XC6063-021

XL2600_US-Sp.book Page 12 Thursday, November 4, 2004 11:41 AM

13

1

Optional Accessories / Accesorios opcionales

1. 2. 3. 4. 5.

No. Part Name

Part Code

U.S.A. Others

1 Walking Foot SA107

F034N:

XC2165-002

2 Quilting Foot SA129

F005N:

XC1948-002

3 1/4-inch Quilting Foot SA125

F001N:

XC1944-002

4 Narrow Hemmer Foot SA127

F003N:

XC1945-002

5 Blind Stitch Foot SA134

F018N:

XC1976-052

Nº Nombre de la pieza

Código de la pieza

EE.UU. Otros

1Pie móvil SA107

F034N:

XC2165-002

2 Pie para acolchados SA129

F005N:

XC1948-002

3

Pie para acolchados de

1/4 pulgadas

SA125

F001N:

XC1944-002

4

Pie para dobladillos

estrechos

SA127

F003N:

XC1945-002

5 Pie para puntada invisible SA134

F018N:

XC1976-052

XL2600_US-Sp.book Page 13 Thursday, November 4, 2004 11:41 AM

KNOWING YOUR SEWING MACHINE / CONOZCA SU MÁQUINA DE COSER ————————————————————————————

—

14

USING YOUR SEWING MACHINE

USO DE LA MÁQUINA DE COSER

●

Use only regular household electricity for the power source. Using other power sources may

result in fire, electric shock, or damage to the machine.

●

Turn off the main power and remove the plug in the following circumstances:

• When you are away from the machine

• After using the machine

• When the power fails during use

• When the machine does not operate correctly due to a bad connection or a disconnection

• During electrical storms

●

Utilice solamente electricidad doméstica regular para la alimentación de la máquina. El uso de otras

fuentes de alimentación puede provocar incendios, descargas eléctricas o averías en la máquina.

●

Apague la máquina y desenchufe el cable de la corriente en las situaciones siguientes:

• Cuando se aleje de la máquina

• Cuando haya terminado de utilizar la máquina

• Si se produce un fallo de tensión durante el funcionamiento

• Si la máquina no funciona correctamente debido a una mala conexión o a una desconexión

• Durante tormentas eléctricas

WARNING/AVISO

●

Do not use extension cords or multi-plug adapters with many other appliances plugged in to

them. Fire or electric shock may result.

●

Do not touch the plug with wet hands. Electric shock may result.

●

When unplugging the machine, always turn off the main power first. Always grasp the plug to

remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric shock.

●

Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted,

or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These

things may damage the cord and cause fire or electric shock. If the cord or plug is damaged,

take the machine to your authorized dealer for repairs before continuing use.

●

Unplug the power cord if the machine is not to be used for a long period of time, otherwise a

fire may result.

●

No utilice cables alargadores ni adaptadores de varias clavijas con otros aparatos conectados.

Podría producirse un incendio o una descarga eléctrica.

●

No toque el enchufe con las manos húmedas. Podría recibir una descarga eléctrica.

●

Desconecte siempre la máquina antes de desenchufar el cable de corriente. Sujete siempre el enchufe para sacarlo

de la toma de corriente. Si tira del cable podría dañarlo o provocar un incendio o una descarga eléctrica.

●

No corte, estropee, cambie, doble, estire, tuerza o enrolle el cable. No coloque objetos pesados

sobre el cable. No exponga el cable al calor. Todo esto podría dañar el cable y provocar un

incendio o una descarga eléctrica. Si el cable está dañado, lleve la máquina a su distribuidor

autorizado para que la repare antes de volver a utilizarla.

●

Desenchufe el cable de la corriente si no va a utilizar la máquina durante un largo período de

tiempo; de no hacerlo, podría producirse un incendio.

CAUTION/PRECAUCIÓN

XL2600_US-Sp.book Page 14 Thursday, November 4, 2004 11:41 AM

15

1

Connecting Plugs

Conexión de enchufes

1

Connect the foot controller plug to the machine.

Enchufe la clavija del pedal a la máquina.

2

Connect the power supply plug to a wall outlet.

Conecte el enchufe en una toma de corriente de la pared.

Note

/

Nota

●

When leaving the machine unattended, the main

switch of the machine should be switched off or

the plug must be removed from the wall outlet.

● When servicing the machine, or when

removing covers or changing bulbs, the

machine must be unplugged.

(For U.S.A. only)

●

This appliance has a polarized plug (one blade

wider than the other). To reduce the risk of

electric shock, this plug is intended to fit in a

polarized outlet only one way. If the plug does

not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified

electrician to install the proper outlet. Do not

modify the plug in any way.

● Cuando deje la máquina desatendida, debe

apagar el interruptor principal de la máquina

o quitar el enchufe de la toma de corriente.

●

Desenchufe la máquina cuando vaya a reparar

la máquina, retirar tapas o cambiar bombillas.

(Sólo para EE.UU.)

●

Este aparato tiene un enchufe polarizado (una

patilla más ancha que la otra). Para reducir el

riesgo de descarga eléctrica, este enchufe está

diseñado de forma que presenta una única posición

de ajuste a una toma polarizada. Si el enchufe no

se ajusta perfectamente a la toma, dele la vuelta.

Si el problema persiste, póngase en contacto con un

electricista cualificado para instalar una toma

adecuada. No realice modificaciones de ningún

tipo en el enchufe.

Main Power and Sewing Light

Switch

Interruptor de la alimentación

y de luz de cosido

This switch turns the main power and sewing light on or off.

Este interruptor enciende y apaga la alimentación y la

luz de cosido.

1 Turn on (toward the ‘I’ mark) / Encendido (hacia

la marca ‘I’)

2 Turn off (toward the ‘O’ mark) / Apagado (hacia

la marca ‘O’)

Foot Controller / Pedal

When you press the foot controller down lightly, the

machine will run at a low speed. When you press

harder, the machine’s speed will increase. When you

take your foot off the foot controller, the machine will

stop. You should make sure that nothing is placed on

the foot controller when the machine is not in use.

Cuando pise el pedal lentamente, la máquina funcionará

a baja velocidad. Al pisarlo más fuerte, la velocidad de

la máquina aumentará. La máquina se detendrá cuando

quite el pie del pedal. Debe asegurarse de que no haya

nada sobre el pedal cuando la máquina no esté en uso.

1 Foot controller / Pedal

2

1

XL2600_US-Sp.book Page 15 Thursday, November 4, 2004 11:41 AM

KNOWING YOUR SEWING MACHINE / CONOZCA SU MÁQUINA DE COSER ————————————————————————————

—

16

Note

/

Nota

(For U.S.A. only)

● Foot Controller: Model KD-1902

This foot controller can be used for Model

XL-3500, XL-2600, XL-3510, XL-2610,

XL-3520, XL-2620.

(Sólo para EE.UU.)

● Pedal: Modelo KD-1902

Este pedal se puede utilizar con los modelos

XL-3500, XL-2600, XL-3510, XL-2610,

XL-3520, XL-2620.

Checking the Needle

Comprobación de la aguja

The sewing needle must always be straight and sharp

for smooth sewing.

La aguja de coser debe estar siempre recta y afilada

para una costura óptima.

■ Checking the Needle Correctly /

Comprobación correcta de la aguja

Put the flat side of the needle on a flat surface.

Check the needle from the top and the sides.

Dispose of any bent needles safely.

Coloque la parte plana de la aguja sobre una

superficie lisa. Examine la aguja desde la parte

superior y los laterales. Deseche las agujas

dobladas de manera segura.

1 Parallel space / Espacio paralelo

2 Level surface (bobbin cover, glass, etc.) /

Superficie nivelada (tapa de la bobina, cristal, etc.)

Replacing the Needle

Cambio de la aguja

●

Do not allow pieces of cloth and dust to

build up on the foot controller. Doing so

could cause a fire or an electric shock.

●

No deje que se acumulen trozos de tela ni

polvo en el pedal. Esto podría provocar un

incendio o una descarga eléctrica.

CAUTION/PRECAUCIÓN

●

Turn the main power switch off before

you change the needle. If you leave the

main power on and step on the foot

controller, the machine will start and you

may be injured.

●

Only use sewing machine needles for

home use. Other needles may bend or

break and cause injury.

●

Never sew with a bent needle. A bent

needle will easily break and cause injury.

●

Antes de cambiar la aguja, apague la

máquina. Si deja la máquina encendida y

pisa el pedal, la máquina comenzará a

funcionar y podría lesionarse.

●

Utilice sólo agujas de máquina de coser

para uso doméstico. Otras agujas podrían

doblarse o romperse, y causar lesiones.

●

No cosa nunca con una aguja doblada.

Una aguja doblada puede romperse

fácilmente y causar lesiones.

1

2

CAUTION/PRECAUCIÓN

XL2600_US-Sp.book Page 16 Thursday, November 4, 2004 11:41 AM

17

1

Remove the power supply plug from the outlet.

Quite el enchufe de la toma de corriente.

2

Raise the needle to its highest position by

turning the handwheel toward you

(counterclockwise) so that the mark on the

handwheel points directly up.

Suba la aguja a la posición más alta girando la

rueda hacia usted (hacia la izquierda), de manera

que la marca de la rueda apunte hacia arriba.

3

Lower the presser foot lever.

Baje la palanca del pie prensatela.

1 Presser foot lever / Palanca del pie prensatela

4

Hold the needle with your left hand, and then

use a screwdriver to turn the needle clamp

screw counterclockwise to remove the needle.

Sujete la aguja con la mano izquierda y, a

continuación, utilice un destornillador para

girar el tornillo de la presilla de la aguja hacia

la izquierda y quitar la aguja.

1 Screwdriver / Destornillador

2 Needle clamp screw / Tornillo de la presilla de la

aguja

• Do not use excessive force when loosening

or tightening the needle clamp screw,

otherwise certain parts of the sewing

machine may be damaged.

No ejerza una fuerza excesiva para aflojar o

apretar el tornillo de la presilla de la aguja,

pues podría dañar algunas piezas de la

máquina de coser.

5

With the flat side of the needle toward the

back of the machine, insert the needle until it

touches the needle stopper. Next, tighten the

needle clamp using the screwdriver.

Con la parte plana hacia la parte trasera de la

máquina, inserte la aguja hasta que toque el

tope para agujas. A continuación, apriete la

presilla de la aguja con el destornillador.

1 Screwdriver / Destornillador

2 Needle Stopper / Tope de la aguja

3 Needle / Aguja

Put the twin needle in the same way.

Coloque la aguja gemela siguiendo el mismo

procedimiento.

1

2

1

●

Make sure you insert the needle until it

touches the stopper, and securely tighten

the needle clamp screw with a

screwdriver. If the needle is not fully

inserted, or if the needle clamp screw is

loose, the needle may break or the

machine may be damaged.

●

Asegúrese de empujar la aguja hasta que

llegue al tope de la cavidad y apriete

fuertemente el tornillo de la presilla de la

aguja con un destornillador. Si la aguja no

está totalmente insertada o el tornillo de la

presilla de la aguja está suelto, la aguja

podría romperse o la máquina averiarse.

2

3

1

CAUTION/PRECAUCIÓN

XL2600_US-Sp.book Page 17 Thursday, November 4, 2004 11:41 AM

KNOWING YOUR SEWING MACHINE / CONOZCA SU MÁQUINA DE COSER ————————————————————————————

—

18

Changing the Presser Foot

Cambio del pie prensatela

You will have to change the presser foot depending

on what you want to sew and how.

Deberá cambiar el pie prensatela según lo que desee

coser y cómo.

■ Snap-on Type / Tipo de ajuste

1

Raise the needle to its highest position by

turning the handwheel toward you

(counterclockwise), and then raise the presser

foot lever.

Suba la aguja a la posición más alta girando la

rueda hacia usted (hacia la izquierda) y suba la

palanca del pie prensatela.

2

Release the foot by raising the lever at the

back of the holder.

Suelte el pedal subiendo la palanca situada en

la parte trasera del soporte.

1 Presser Foot / Pie prensatela

3

Put a different presser foot on the needle plate

so that the bar on the presser foot is in line

with the slot on the shank.

Coloque otro pie prensatela en la placa de la

aguja para que la varilla del pie quede

alineada con la ranura de la lengüeta.

4

Lower the presser foot lever and fix the

presser foot onto the shank. If the presser foot

is in the correct place, the bar should snap in.

Baje la palanca del pie prensatela y ajuste el

pie en la lengüeta. Si el pie prensatela está en el

lugar correcto, la varilla deberá ajustarse

perfectamente.

1 Shank / Lengüeta

●

Always turn off the power before you

change the presser foot. If you leave the

power on and step on the controller, the

machine will start and you may be

injured.

●

Always use the correct presser foot for

the stitch pattern you have chosen. If you

use the wrong presser foot, the needle

may strike the presser foot and bend or

break, and may cause injury.

●

Only use presser feet that have been

designed to be used with this machine.

Using any other presser foot may cause

accident or injury.

●

Antes de cambiar el pie prensatela,

apague la máquina. Si deja la máquina

encendida y pisa el pedal, la máquina

comenzará a funcionar y podría

lesionarse.

●

Utilice siempre el pie prensatela correcto

para la costura elegida. Si utiliza un pie

prensatela erróneo, la aguja puede

golpearlo y doblarse o romperse, y podría

causar lesiones.

●

Utilice sólo el pie prensatela diseñado para

esta máquina. El uso de otro pie prensatela

puede causar lesiones o accidentes.

CAUTION/PRECAUCIÓN

1

XL2600_US-Sp.book Page 18 Thursday, November 4, 2004 11:41 AM

19

1

■ Presser Foot Installation Orientation

Orientación para la instalación del pie prensatela

Flat Bed Attachment

Unidad de cama plana

The accessories are stored in a compartment inside

the flat bed attachment.

Los accesorios se encuentran en un compartimento

dentro de la unidad de cama plana.

1

Slide the flat bed attachment to the left to open it.

Tire de la unidad de cama plana hacia la

izquierda para abrirla.

1 Flat bed attachment / Unidad de cama plana

2 Storage compartment / Compartimento para

almacenamiento

Note

/

Nota

● Put the accessories inside a bag, and then

store the bag inside the compartment. If the

accessories are not in a bag, they may fall

out and be lost or damaged.

● Coloque los accesorios en una bolsa y, a

continuación, guárdela en el compartimento.

Si los accesorios no se guardan en una

bolsa, se podrían caer, perder o dañar.

Using a Free-arm Style

Uso del estilo de brazo libre

Free-arm sewing is convenient for sewing tubular

and hard-to-reach areas. To change your machine to

the free-arm style, lift out the flat bed attachment.

La costura de brazo libre es útil para zonas de costura

tubular y de difícil acceso. Para cambiar la máquina al

estilo de brazo libre, abra la unidad de cama plana.

1

Slide the flat bed attachment to the left to

release it.

Tire de la unidad de cama plana hacia la

izquierda para abrirla.

1 Flat bed attachment / Unidad de cama plana

●

If the presser foot is not installed with the

correct orientation, the needle may strike

the presser foot, which may bend or

break the needle and cause injury.

●

Si el pie prensatela no está colocado con

la orientación correcta, la aguja puede

golpearlo y doblarse o romperse, y podría

causar lesiones.

CAUTION/PRECAUCIÓN

1

2

1

XL2600_US-Sp.book Page 19 Thursday, November 4, 2004 11:41 AM

KNOWING YOUR SEWING MACHINE / CONOZCA SU MÁQUINA DE COSER ————————————————————————————

—

20

THE CONTROLS / CONTROLES

Pattern Selection Dial

Selector de puntadas

To choose a stitch, simply turn the pattern selection

dial in either direction. The next section shows

recommended stitch lengths and widths.

Para elegir una puntada, simplemente gire el selector

de puntadas en cualquier dirección. En la sección

siguiente se muestran las longitudes y las anchuras de

puntada recomendadas.

1 Pattern selection dial / Selector de puntadas

2 Chosen pattern number / Número de dibujo

elegido

■ 35 Stitches (only available on certain models) / 35 Puntadas (disponible sólo en ciertos modelos)

● When you use the pattern selection dial

to choose a pattern, turn the handwheel

toward you (counterclockwise) to set the

needle in the highest position. If the

needle is in the down position when you

turn the pattern selection dial, the

needle, presser foot or fabric may be

damaged.

●

Cuando utilice el selector de puntadas

para elegir un dibujo, gire la rueda hacia

usted (hacia la izquierda) para colocar la

aguja en la posición más alta. Si la aguja

está en la posición baja, cuando gire el

selector de puntadas se podrían dañar la

aguja, el pie prensatela o la tela.

CAUTION/PRECAUCIÓN

2

1

XL2600_US-Sp.book Page 20 Thursday, November 4, 2004 11:41 AM

21

1

■ 25 Stitches / 25 puntadas

Patterns and Stitch Names / Dibujos y nombres de las puntadas

Pattern / Dibujo

Stitch Name

Nombre de la puntada

Width (mm (inch))

Anchura [mm (pulg.)]

Length (mm (inch))

Longitud [mm (pulg.)]

Manual Page

Página del manual

Stitches

puntadas

Stitches

puntadas

4-STEP AUTOMATIC

BUTTONHOLE

OJAL AUTOMÁTICO DE 4

PASOS

3-5

(1/8 – 3/16)

F- 1.5

(1/64-1/16)

52

STRAIGHT STITCH

PUNTADA RECTA

0-5 (0-3/16)

(Changes needle

position / Cambio

de posición de la

aguja)

1-4

(1/16-3/16)

41, 56, 58, 62,

63, 65

ZIGZAG STITCH

PUNTADA DE ZIG-ZAG

0-5

(0-3/16)

F-4

(1/64-3/16)

43, 55, 58, 62

BLIND HEM STITCH

COSTURA INVISIBLE PARA

DOBLADILLO

3-5

(1/8-3/16)

F-2

(1/64-1/16)

45

SHELL TUCK STITCH

PUNTADA DE CONCHA

3-5

(1/8-3/16)

F-3

(1/64-1/8)

46

ELASTIC STITCH

PUNTADA ELÁSTICA

3-5

(1/8-3/16)

F-2.5

(1/64-3/32)

46

STRETCH BLIND HEM

STITCH

COSTURA INVISIBLE

ELÁSTICA

3-5

(1/8-3/16)

F-1.5

(1/64-1/16)

45

STRETCH BLIND HEM

STITCH

COSTURA INVISIBLE

ELÁSTICA

3-5

(1/8-3/16)

F-1.5

(1/64-1/16)

45

ELASTIC SHELL TUCK

STITCH

PUNTADA DE CONCHA

ELÁSTICA

3-5

(1/8-3/16)

F-3

(1/64-1/8)

48

DOUBLE ACTION STITCH

PUNTADA DE DOBLE

ACCIÓN

3-5

(1/8-3/16)

F-3

(1/64-1/8)

47

BRIDGING STITCH

PUNTADA DE PUENTE

3-5

(1/8-3/16)

F-3

(1/64-1/8)

47

35

25

XL2600_US-Sp.book Page 21 Thursday, November 4, 2004 11:41 AM

KNOWING YOUR SEWING MACHINE / CONOZCA SU MÁQUINA DE COSER ————————————————————————————

—

22

* The stitch can also be sewn when the stitch length dial is set to .

* También se puede coser la costura con el control de longitud de puntada ajustado en .

Pattern / Dibujo

Stitch Name

Nombre de la puntada

Width (mm (inch))

Anchura [mm (pulg.)]

Length (mm (inch))

Longitud [mm (pulg.)]

Manual Page

Página del manual

Stitches

puntadas

Stitches

puntadas

RAMPART STITCH

PUNTADA DE MURALLA

3-5

(1/8-3/16)

F-3

(1/64-1/8)

47

TRIANGLE STITCH

PUNTADA TRIANGULAR

3-5

(1/8-3/16)

F- 1.5

(1/64-1/16)

50

TRIPLE STRETCH STITCH

PUNTADA ELÁSTICA TRIPLE

0-5 (0-3/16)

(Changes needle

position / Cambio

de posición de la

aguja)

Fixed / Fija

2.5 (3/32)

*

41

Fixed / Fija

2.5 (3/32)

TRIPLE ZIGZAG STRETCH

STITCH

PUNTADA ELÁSTICA EN

ZIG-ZAG TRIPLE

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

*

50

Fixed / Fija

2.5 (3/32)

STRETCH OVERLOCK

STITCH

PUNTADA OVERLOCK

PESPUNTO

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

48

Fixed / Fija

2.5 (3/32)

ELASTIC OVERLOCK

STITCH

PUNTADA OVERLOCK

ELÁSTICA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

48

Fixed / Fija

2.5 (3/32)

FEATHER STITCH

PUNTADA DE PLUMAS

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

49

Fixed / Fija

2.5 (3/32)

ARROWHEAD STITCH

PUNTADA DE FLECHA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

48

Fixed / Fija

2.5 (3/32)

ARROWHEAD STITCH

PUNTADA DE FLECHA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

48

Fixed / Fija

2.5 (3/32)

DECORATIVE STITCH

PUNTADA DECORATIVA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

50

Fixed / Fija

2.5 (3/32)

LEAF STITCH

PUNTADA DE HOJA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

50

Fixed / Fija

2.5 (3/32)

35

25

XL2600_US-Sp.book Page 22 Thursday, November 4, 2004 11:41 AM

23

1

Pattern / Dibujo

Stitch Name

Nombre de la puntada

Width (mm (inch))

Anchura [mm (pulg.)]

Length (mm (inch))

Longitud [mm (pulg.)]

Manual Page

Página del manual

Stitches

puntadas

Stitches

puntadas

TREE STITCH

PUNTADA DE ÁRBOL

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

50

Fixed / Fija

2.5 (3/32)

LEGS STITCH

PUNTADA DE HORQUILLA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

50

Fixed / Fija

2.5 (3/32)

DECORATIVE STITCH

PUNTADA DECORATIVA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

50

Fixed / Fija

2.5 (3/32)

STRETCH OVERLOCK

STITCH

PUNTADA OVERLOCK

PESPUNTO

3-5

(1/8-13/64)

Fixed / Fija

2.5 (3/32)

50

STRETCH OVERLOCK

STITCH

PUNTADA OVERLOCK

PESPUNTO

3-5

(1/8-13/64)

Fixed / Fija

2.5 (3/32)

50

SMOCKING STITCH

PUNTADA DE SMOCKING

3-5

(1/8-13/64)

Fixed / Fija

2.5 (3/32)

48

COMB STITCH

PUNTADA COMBINADA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

48

COMB STITCH

PUNTADA COMBINADA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

48

DECORATIVE STITCH

PUNTADA DECORATIVA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

50

FAGOTING STITCH

VAINICA

3-5

(1/8-13/64)

Fixed / Fija

2.5 (3/32)

48

DECORATIVE STITCH

PUNTADA DECORATIVA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

48

DECORATIVE HEM STITCH

PUNTADA DE DOBLADILLO

DECORATIVO

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

50

DECORATIVE STITCH

PUNTADA DECORATIVA

3-5

(1/8-3/16)

Fixed / Fija

2.5 (3/32)

50

35

25

XL2600_US-Sp.book Page 23 Thursday, November 4, 2004 11:41 AM

Page is loading ...

Brother XL-2600/2600i/2610 User manual

This manual is also suitable for

Brother XL-2600/2600i/2610 User manual

in other languages

Related papers

Other documents