What’s in the box
1
Install your gateway
O Insert the installation CD into the
PC’s CD ROM (or DVDROM)
drive
> The installation program will start
automatically
O Follow instructions on the screen
Choose your language
B
By default,the language of your
operating system will be choosen,
but you have 10 seconds if you
want to select another one.
O Click on the required language
> The next screen will be displayed
automatically
Insert installation CD
A
If for some reason the installation
does not start automatically:
O Click on Windows START and
then RUN
O Type explorer and navigate to the
CD ROM (or DVDROM) drive
O Double-click on Setup.exe
Choose your product
C
O Click on the picture of the
SNB5600 Wireless Router
> The next screen will be displayed
automatically
O Follow instructions on the screen
for the connection of your gateway
Connected to Internet
E
Enter Internet Service Provider settings
D
Once the installation completed,
the following screen will be
displayed.
O Click on Menu in order to install
the wireless USB adapter
O Fill in the fields using the
information provided by your
Internet Service Provider
O Click on Continue
> A progress bar screen will be
displayed,your settings will be saved
and you will be connected to Internet
> The next screen will be displayed
Wireless router
Ethernet cable
