Wacker Neuson PDI2A is a diaphragm pump designed for pumping dirty water with suspended solids up to 1/2" (13 mm). It features a robust design with a cast iron pump casing and an oil bath gearbox for long service life. The pump is powered by a Honda GX160 engine, providing plenty of power for even the most demanding applications. With a maximum flow rate of 110 US GPM (416 l/min) and a maximum head of 92 ft (28 m), the PDI2A is ideal for a variety of applications, including construction site dewatering, flood control, and slurry pumping.
Wacker Neuson PDI2A is a diaphragm pump designed for pumping dirty water with suspended solids up to 1/2" (13 mm). It features a robust design with a cast iron pump casing and an oil bath gearbox for long service life. The pump is powered by a Honda GX160 engine, providing plenty of power for even the most demanding applications. With a maximum flow rate of 110 US GPM (416 l/min) and a maximum head of 92 ft (28 m), the PDI2A is ideal for a variety of applications, including construction site dewatering, flood control, and slurry pumping.
Wacker Neuson PDI2A is a diaphragm pump designed for pumping dirty water with suspended solids up to 1/2" (13 mm). It features a robust design with a cast iron pump casing and an oil bath gearbox for long service life. The pump is powered by a Honda GX160 engine, providing plenty of power for even the most demanding applications. With a maximum flow rate of 110 US GPM (416 l/min) and a maximum head of 92 ft (28 m), the PDI2A is ideal for a variety of applications, including construction site dewatering, flood control, and slurry pumping.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI