Zebra CR0078 Owner's manual

Ferrite Installation

Zebra Technologies Corporation

http://www.zebra.com

Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered

trademark of Symbol Technologies, Inc., a Zebra Technologies company.

72-135794-02 Revision A- December 2014

CR0078-SC1009BWR

When using cradle p/n CR0078-SC1009BWR with an external power supply in

a healthcare environment, place the ferrite core (included in the box) on the

power supply cable as follows:

1. Open the ferrite core and place it 5 in./12.7 cm (+/- 1 in./2.5 cm) from the

power port on the power supply cable.

2. Route the cable outside the ferrite core once and then close the ferrite core.

Connect to

Appropriate Host

Power Port

Host Port

Power

Ferrite Core

5 in./12.7 cm

(+/- 1 in./2.5 cm)

Wrap

Once