7/17
Product Parts
1 - Graphic
2 - Removable Strips (x16)
Front Door
Display Set-Up
1
2
Storage & Care
Spot clean with damp cloth.
Step 1
Clean perimeter of door’s face. Place
Removable Double Sided Tape (2) around
perimeter of the door. Align tape with edges
of door.
Front Door Decor
by Creative Impact Graphics www.mydoordecor.com
Installation Instructions
Align “Front Door Decor”
to the left side of the door
and the bottom of the door.
With a scissors or utility knife,
trim the top and right side
of the “Front Door Decor”
to the edge of the door if needed.
1
3
4
With a scissors or utility knife,
trim the “Front Door Decor”
to accommodate the door handle.
(See trimming recommendations below).
Firmly press the “Front Door Decor”
where the adhesive pads are placed to
adhere in position.
5
Clean perimeter of the door’s face.
Place removable adhesive pads
around perimeter of door.
Aling pads with edges of door.
Follow these directions for doors with handles
on left or right side of door.
Read all directions before beginning installation.
Trimming Recommendations - All door handles are unique, the trimming recommendations are suggestions only.
Front Door Decors can be trimmed to your liking.
Before performing
step 2.
Remove handles and
trim Front Door Decor
to the holes in the
door.
Replace handle after
installation is
complete.
Trim from edge of
door around door
handle.
Add adhesive pads
around cut area to
hold in place.
Trim around the
contour of door
handle.
Add adhesive pads
around cut area to
hold in place.
Option A Option B Option C
Remove liner from adhesive pads.
2
Step 2
Align the Graphic (1) to the hinged side of
the door and the bottom of the door. With a
scissors or utility knife trim top and knob side
to the edges of door if needed.
Step 3
With a scissors or utility knife trim top and
knob side to the edges of door if needed.
(See trimming recommendations below).
Front Door Decor
by Creative Impact Graphics www.mydoordecor.com
Installation Instructions
Align “Front Door Decor”
to the left side of the door
and the bottom of the door.
With a scissors or utility knife,
trim the top and right side
of the “Front Door Decor”
to the edge of the door if needed.
1
3
4
With a scissors or utility knife,
trim the “Front Door Decor”
to accommodate the door handle.
(See trimming recommendations below).
Firmly press the “Front Door Decor”
where the adhesive pads are placed to
adhere in position.
5
Clean perimeter of the door’s face.
Place removable adhesive pads
around perimeter of door.
Aling pads with edges of door.
Follow these directions for doors with handles
on left or right side of door.
Read all directions before beginning installation.
Trimming Recommendations - All door handles are unique, the trimming recommendations are suggestions only.
Front Door Decors can be trimmed to your liking.
Before performing
step 2.
Remove handles and
trim Front Door Decor
to the holes in the
door.
Replace handle after
installation is
complete.
Trim from edge of
door around door
handle.
Add adhesive pads
around cut area to
hold in place.
Trim around the
contour of door
handle.
Add adhesive pads
around cut area to
hold in place.
Option A Option B Option C
Remove liner from adhesive pads.
2
Trimming Recommendations - All door handles are unique, the trimming recommendations are suggestions only.
Before performing
Step 2.
Remove handle and or
lock and trim Graphic
(1) to the holes in the
door.
Replace handle after
installation is complete.
Trim from edge of door
around door handle.
Add Removable Double
Sided Tape around cut
area to hold in place.
Trim around the contour
of door handle.
Add Removable Double
Sided Tape (2) around
cut area to hold in
place.
/
