Eurotech ReliaGATE 10-05 Owner's manual

Type
Owner's manual
Original User Manual
ReliaGATE 10-05-x3
Multi-Service Gateway & Edge Controller
Rev. 1-6 — 16 October 2018 — REGATE-10-05-x3_UserMan_ENG_1-6 ENGLISH
Trademarks
All trademarks, registered trademarks, logos, trade names and products names contained in this
document are the property of their respective owners.
Intended audience
This document is intended for system developers, who are skilled persons with a thorough knowledge in
installing and implementing computer systems, networks, and related operating software.
Disclaimer of liability
Eurotech has reviewed the contents of this document to ensure accuracy and consistency with the
hardware and software described.
Always refer to the latest available manual revision available at: www.eurotech.com.
Revision history
Revision Description Date
1-0
First release 1 July 2016
1-1
Updated:
Product labels
Electromagnetic Compatibility
Mechanical Dimensions
Minor changes
11 October 2016
1-2
Updated:
Operating temperature
4 November 2016
1-3
Updated:
Operating temperature
14 December 2016
1-4
Updated section:
How to access the interfaces under Linux
10 October 2017
1-5
Updated information about:
The backup battery
The serial ports
How to access the interfaces under Linux
4 April 2018
1-6
Updated paragraph 11.3 "Internal backup battery" 16 October 2018
© 2018 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
ReliaGATE 10-05-x3 User Manual Rev 1-6
Contents
CONTENTS
Trademarks 2
Intended audience 2
Disclaimer of liability 2
Revision history 2
Contents 3
1 Safety instructions 7
1.1 Safety messages used in this document 7
1.1.1 Safety messages for hazards with a high level of risk 7
1.1.2 Safety messages for hazards with a medium level of risk 8
1.1.3 Safety messages for hazards with a low level of risk 8
1.2 Other messages used in this document 8
1.2.1 Instructions on how to use the product effectively and avoid any damage 8
1.3 How to prevent electrostatic discharge 9
1.4 How to safely connect power to the product 9
2 How to receive technical assistance 11
2.1 How to ask for technical support 11
2.2 How to send a product for repair 11
3 Conventions used in this document 13
3.1 Conventions for signal names 13
3.2 Conventions for signal types 13
4 Getting started 15
5 Product overview 17
5.1 Product labels 18
6 Declaration of Conformity 19
6.1 CE Marking 19
6.2 WEEE compliance 19
6.3 RoHS compliance 19
6.4 Electromagnetic Compatibility 20
6.4.1 Electromagnetic Compatibility (EU) 20
6.4.2 FCC Class A statement (USA) 20
7 Technical Specifications 21
8 Interfaces overview 23
8.1 Front panel interfaces 23
8.1.1 DIP switch selector functions 23
8.1.2 8-position connector functions 23
8.2 Rear panel interfaces 24
8.3 LED indicators 25
8.4 Service panel interfaces 26
9 Interfaces in detail 27
9.1 Wi-Fi and Bluetooth 27
9.1.1 Wi-Fi specifications 27
9.1.2 Bluetooth specifications 27
9.2 Host USB port 28
3 / 66
Contents
ReliaGATE 10-05-x3 User Manual Rev 1-6
9.2.1 Connector pinout 28
9.3 Ethernet port 29
9.3.1 Connector pinout 29
9.3.2 Port specifications 29
9.4 Serial ports 30
9.4.1 Serial ports pinout 30
9.4.2 How to insert RS-485 fail-safe and termination resistors 31
9.5 Console port 32
9.5.1 Connector and mating connector specifications 32
9.5.2 Connector pinout 32
9.6 RTC (Real Time Clock) 33
9.7 The MicroSD card receptacle 34
9.8 The Programmable pushbutton 34
10 The Software 35
10.1 The Linux OS distribution 35
10.2 The bootloader procedure 35
10.2.1 How to select the Linux kernel sources 35
11 The power supply 37
11.1 Power supply sources 37
11.2 External DC power supply 37
11.2.1 Power IN pinout 37
11.3 Internal backup battery 38
11.3.1 How to connect / disconnect the backup battery 38
11.4 Functions enabled by the backup battery 39
11.4.1 How to enable the RTC backup function 39
11.4.2 How to enable the Safe shutdown function 39
11.5 How to check the current power supply source 39
11.6 The Watchdog 40
11.6.1 How to enable/disable the watchdog 40
11.7 How to turn ON the product 41
11.8 How to hardware reset the product 42
11.9 How to shutdown the OS 42
11.10 How to turn OFF the product 43
12 How to access the interfaces under Linux 45
12.1 Ethernet port 45
12.2 Wi-Fi and Bluetooth 46
12.2.1 Wi-Fi 46
12.2.2 Bluetooth 46
12.3 Serial ports, Console port 47
12.3.1 How to test a serial port 47
12.4 LED indicators 48
12.4.1 How to manage a LED 48
12.5 The Programmable pushbutton 49
12.6 Flash Memory 50
12.7 RTC 50
13 How to log in the Administration console 51
13.1 The default credentials 51
13.2 How to login using the console port 51
13.3 How to change the Linux password 51
14 How to install the product 53
14.1 How to install the ReliaGATE 10-05-x3 using the Mounting Bracket 53
14.2 Optional: How to install the ReliaGATE 10-05-x3 using the DIN Rail Mounting Kit 54
4 / 66
ReliaGATE 10-05-x3 User Manual Rev 1-6
Contents
14.2.1 How to replace the Mounting Bracket with the DIN Rail Mounting Kit 54
14.2.2 How to install the ReliaGATE 10-05-x3 on a DIN rail 56
14.2.3 How to remove the ReliaGATE 10-05-x3 from a DIN rail 56
15 How to maintain the product 57
15.1 Use antistatic precautions 57
15.2 Remove the power supply 57
15.3 Inspect the installation of the product 57
15.4 Clean the product 57
16 Mechanical specifications 59
16.1 ReliaGATE 10-05-x3 mechanical dimensions 59
16.2 Mounting Bracket mechanical dimensions 60
17 Eurotech Everyware IoT 61
17.1 Everyware Software Framework (ESF) 61
17.2 The ESF Web UI 62
17.3 The ESF Wires Application 63
17.4 Everyware Cloud (EC) 64
17.5 For further information 64
Notes 65
5 / 66
(This page has been intentionally left blank)
ReliaGATE 10-05-x3 User Manual Rev 1-6
1 Safety instructions
1 SAFETY INSTRUCTIONS
READ CAREFULLY AND UNDERSTAND THE INSTRUCTIONS AND WARNINGS CONTAINED
IN THIS DOCUMENT BEFORE INSTALLING / USING THE PRODUCT.
KEEP THIS DOCUMENT FOR FUTURE REFERENCE.
To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions
and warnings contained in this document.
Failure to comply with the instructions and warnings contained this document, violates the standards of
safety, design, manufacture, and intended use of the product.
Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings
contained this document.
Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support (for more information see "How to receive technical assistance" on page 11).
1.1 Safety messages used in this document
1.1.1 Safety messages for hazards with a high level of risk
To indicate a hazard with a high level of risk which, if not avoided, will result in death or serious injury,
the following safety message is used; the message also contains the safety instructions to follow to avoid
any hazard:
DANGER
TEXT THAT EXPLAINS THE SOURCE OF THE HAZARD
(WRITTEN WITH BOLD UPPER-CASE CHARACTERS)
Text with the safety instructions to follow to avoid any hazard
(written with bold lower-case characters)
Example:
DANGER
HIGH VOLTAGE INSIDE.
CONTACT WILL CAUSE ELECTRIC SHOCK OR BURN.
Turn OFF and disconnect power before opening the rack.
7 / 66
1 Safety instructions
ReliaGATE 10-05-x3 User Manual Rev 1-6
1.1.2 Safety messages for hazards with a medium level of risk
To indicate a hazard with a medium level of risk which, if not avoided, could result in death or serious
injury, the following safety message is used; the message also contains the safety instructions to follow
to avoid any hazard:
WARNING
TEXT THAT EXPLAINS THE SOURCE OF THE HAZARD
(WRITTEN WITH BOLD UPPER-CASE CHARACTERS)
Text with the safety instructions to follow to avoid any hazard
(written with bold lower-case characters)
1.1.3 Safety messages for hazards with a low level of risk
To indicate a hazard with a low level of risk which, if not avoided, could result in minor or moderate
injury, the following safety message is used; the message also contains the safety instructions to follow
to avoid any hazard:
CAUTION
TEXT THAT EXPLAINS THE SOURCE OF THE HAZARD
(WRITTEN WITH BOLD UPPER-CASE CHARACTERS)
Text with the safety instructions to follow to avoid any hazard
(written with bold lower-case characters)
1.2 Other messages used in this document
1.2.1 Instructions on how to use the product effectively and avoid any damage
To indicate:
l Instructions on how to use the product effectively
l Instructions on how to avoid damaging the product or third-party property (not related to personal
injury),
the following message is used:
NOTICE
SIGN
(if necessary)
Text with the instructions to follow to complete the specific task
(written with bold characters).
8 / 66
ReliaGATE 10-05-x3 User Manual Rev 1-6
1 Safety instructions
1.3 How to prevent electrostatic discharge
NOTICE
HOW TO PREVENT DAMAGING ELECTROSTATIC-SENSITIVE DEVICES
The symbol on the left is applied on electrostatic-sensitive devices.
To prevent damaging electrostatic-sensitive devices:
l Handle the electrostatic-sensitive devices in an ESD Protected Area (EPA)
l Observe the appropriate antistatic precautions. For example: use a wrist
strap kept in constant contact with bare skin and attached to ground.
1.4 How to safely connect power to the product
To safely connect power to the product:
l Observe all the instructions for safety, installation, and operation
l Never operate with wet hands
l Use certified power cables
l Make sure the power cables are not damaged before using them
l Make sure that the power cables meet the power requirements of the device
l Position cables with care. Do not position cables in places where they may be trampled or
compressed by objects placed on them
l Make sure that the power-points and plugs are not damaged before using them
l Do not overload the power-points and plugs
l Use a power supply that meets the requirements stated on the identification label of the
product. In case of uncertainties about the required power supply, contact the Eurotech
Technical Support Team (for more information see "How to receive technical assistance"
on page 11).
9 / 66
(This page has been intentionally left blank)
ReliaGATE 10-05-x3 User Manual Rev 1-6
2 How to receive technical assistance
2 HOW TO RECEIVE TECHNICAL ASSISTANCE
2.1 How to ask for technical support
To ask for technical support, complete the following steps
1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/
2. Submit a support request
3. Wait for the reply from the Support Team with the information you required
2.2 How to send a product for repair
To send a product for repair, complete the following steps:
1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/
2. Submit an RMA request
3. Wait for the reply from the RMA Department. It will contain:
l The RMA number
l The shipping information
4. Pack the product adequately using anti-static material and place it in a sturdy box with enough
packing material to protect it from shocks and vibrations
5. Ship the product to Eurotech following the information received from the RMA Department.
NOTICE
Any product returned to Eurotech, that is found to be damaged due to inadequate packaging,
will not be covered by the warranty.
11 / 66
(This page has been intentionally left blank)
ReliaGATE 10-05-x3 User Manual Rev 1-6
3 Conventions used in this document
3 CONVENTIONS USED IN THIS DOCUMENT
3.1 Conventions for signal names
Convention Description
GND Ground
# Active low signal
+ Positive signal; Positive signal in differential pair
- Negative signal; Negative signal in differential pair
3.3 3.3 V signal level
5 5 V signal level
NC No Connection
Reserved Use is reserved to Eurotech
3.2 Conventions for signal types
Convention Description
I Signal is an input to the system
O Signal is an output from the system
IO Signal may be input or output
P Power and Ground
A Analog signal
NC No Connection
Reserved Use is reserved to Eurotech
13 / 66
(This page has been intentionally left blank)
ReliaGATE 10-05-x3 User Manual Rev 1-6
4 Getting started
4 GETTING STARTED
To get started with the ReliaGATE 10-05-x3, follow these steps :
1. Know the ReliaGATE 10-05-x3 interfaces.
The ReliaGATE 10-05-x3 provides connectivity to several wired and wireless interfaces.
For further information, see:
l "Product overview" on page 17
l "Declaration of Conformity" on page 19
l "Technical Specifications" on page 21
l "Interfaces overview" on page 23
l "Interfaces in detail" on page 27
2. Supply power to the ReliaGATE 10-05-x3.
Supply power to the ReliaGATE 10-05-x3 correctly, respecting all the safety instructions.
For further information, see "The power supply" on page 37
3. Log into the Administration console.
The ReliaGATE 10-05-x3 runs a Linux distribution based on a Yocto framework.
For further information, see:
l "The Software" on page 35
l "How to access the interfaces under Linux" on page 45
l "How to log in the Administration console" on page 51
4. Install the ReliaGATE 10-05-x3.
The ReliaGATE 10-05-x3 is lightweight and compact. You can easily install it in place.
For further information, see:
l "How to install the product" on page 53
l "Mechanical specifications" on page 59
5. Maintain the ReliaGATE 10-05-x3.
Periodic maintenance of the ReliaGATE 10-05-x3 ensures greater integrity and reliable operation.
For further information, see:
l "How to maintain the product" on page 57
6. Start developing your applications.
Depending on the product version you purchased, the ReliaGATE 10-05-x3 can come pre-
configured with Eurotech’s Everyware Software Framework (ESF).
ESF is a smart application container that enables remote management of IoT gateways and
provides a wide range of APIs allowing you to write and deploy your own IoT application.
For detailed instructions, and sample applications for developing device applications using ESF on
Eurotech platforms, see: http://esf.eurotech.com/docs.
15 / 66
(This page has been intentionally left blank)
ReliaGATE 10-05-x3 User Manual Rev 1-6
5 Product overview
5 PRODUCT OVERVIEW
The ReliaGATE 10-05 is a compact and lightweight device intended to be used as Multi-Service IoT
Gateway. It is based on the NXP i.MX285 CPU, with 512MB of RAM, 4GB of eMMC, and a user-
accessible microSD slot.
It is suitable for intensive workload in industrial applications. It supports a 9 to 36 V power supply with
transient, surge, noise, and reverse polarity protection with a power consumption of 1.5 W idle. An internal
backup battery can enable a customer safe shutdown application in case of a blackout.
The ReliaGATE 10-05 includes two protected serial ports (RS-232 and RS-485), and one noise and surge
protected USB 2.0 port, and one Fast Ethernet port. According to the version, the ReliaGATE 10-05 can
feature wireless connectivity capabilities: it can integrate a cellular modem (2G or global 3G), Wi-Fi
802.11b,g,n, and Bluetooth 4.0 BLE (Bluetooth Low Energy).
The ReliaGATE 10-05 can be equipped with Everyware™ Software Framework (ESF), a commercial,
enterprise-ready edition of Eclipse Kura, the open source Java/OSGi middleware for IoT gateways.
The ReliaGATE 10-05 can also take advance of Everyware Cloud (separately available). Everyware Cloud
(EC) is a specialized cloud solution that allows you to easily connect, configure and manage your device
through all its life-cycle.
A Development Kit is available upon request. It allows you to quickly and easily start the development of
your applications.
Figure 5.1 - The ReliaGATE 10-05-x3
17 / 66
5 Product overview
ReliaGATE 10-05-x3 User Manual Rev 1-6
5.1 Product labels
Product labels are placed on the underside of the ReliaGATE 10-05-x3.
Ref# Label content Label example
1 ReliaGATE model number
ReliaGATE serial number
WEEE symbol
CE mark
Ethernet MAC address
FCC information
Power details
18 / 66
ReliaGATE 10-05-x3 User Manual Rev 1-6
6 Declaration of Conformity
6 DECLARATION OF CONFORMITY
6.1 CE Marking
This product is CE marked.
The product meets the guidelines listed in the following sections.
Eurotech is not responsible for the use of this product together with equipment (e.g. power
supplies, personal computers, etc.) that are not CE marked and compliant with the
requirements specified in this document.
This product is compliant with:
l RoHS
l IP40
l CE
This product has been certified with the following:
- Wi-Fi / BT antenna:
l Manufacturer: Linx Technologies
l Part Number: ANT-DB1-RAF-RPS
6.2 WEEE compliance
In compliance with the Directive 2012/19/EU of the European Parliament and of the Council
of 4 July 2012 on waste electrical and electronic equipment (WEEE), the symbol on the
right, shown on the product or within its literature, indicates separate collection for this
electrical and electronic equipment (EEE) that has been placed on the market after 2005.
This product, at the end of its life cycle, must be collected separately and managed in
accordance with the provisions of the current Directive on waste electrical and electronic
equipment.
Because of the substances present in the product, improper use or disposal of the refuse
can cause damage to human health and the environment.
To avoid any possible legal implications, contact your local waste collection body for full
recycling information.
6.3 RoHS compliance
The product described in this document, including all its components and its sub-assemblies, have been
manufactured in compliance with the Directive 2011/65/EU of the European Parliament and of the Council
of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment.
19 / 66
6 Declaration of Conformity
ReliaGATE 10-05-x3 User Manual Rev 1-6
6.4 Electromagnetic Compatibility
6.4.1 Electromagnetic Compatibility (EU)
Conditions of operation
This product meets the requirements of the EC Directive 2004/108/EC on the electromagnetic
compatibility.
This product is designed for industrial applications.
Modifications
Any modifications made to this product that are not approved by Eurotech may void the prerequisites for
the EC conformity declaration.
6.4.2 FCC Class A statement (USA)
Conditions of operation
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This product may not cause harmful interference
2. This product must accept any interference received, including interference that may cause
undesired operation.
FCC Radio Frequency Interference statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Modifications
Changes or modifications not expressly approved by Eurotech could void the authority granted to the user
by the FCC to operate this product.
Product FCC IDs
FCC ID: UKMMRG1005
20 / 66
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66

Eurotech ReliaGATE 10-05 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI