GAP GONE HD-1-GGBWH Installation guide

Instructions for Gap Gone Bundle Installation

1. Unpack the box which contains the following items;

a. (2) sides

b. (6) clips

c. Pack of 12 screws

2. Ensure that the windows blinds are installed to place the sides over the sides attached to the

window frame

3. Measure the inside of the window frame from the top to the windowsill (3) times. (Measure (3)

times to ensure an accurate measurement)

4. Cut the sides to the length of the window frame with the cut portion facing up to cover the

blinds rail.

5. Measure the inside width of the windows (Or you can use the width of the installed blinds)

6. Cut the Valance to the measured size and attach with double sided tape (Not Inclosed)

7. Put the clips in the allocated holes on the clip sides.

8. Dry fit the sides to the desired depth

9. Peel of the clip backing and press firmly on the sides of the window frame.

10. Once installed please allow 24 hours for the glue to adhere to the window frame for a tight fit

11. Enjoy your new Gap Gone window tfreatment

This manual is also suitable for

Download PDF