IFILTER XWH-600 User manual

Type
User manual

This manual is also suitable for

Connect your IN line
using a ex pipe
(recommended)
Connect the OUT
line using a ex pipe
(recommended) to
your home.
1) Ensure ground is leveled and the system has 2-3 feet of clearance.
2) Mounting the Pre-lter to the wall is optional but might be required if
using ex lines. A block of wood might be required to extend the back of
the pre-lter bracket to the wall.
3) Flush the main unit for 10-15 minutes before installing the OUT port to
your home/business. Using a hose is recommended to avoid water damage
in an in-home installation. Simply connect a hose to the OUT port of the
main unit and run the hose to a grass or planter area.
XWH Series Installation
www.ilters.com
Pre-Filter
Main Unit
4) Once the system is ushed, simply connect a Flex Line (not included)
from the OUT port of the unit to the IN pipe of your home or business.
5) Installing a shuto valve and a bypass valve is recommend for servicing.
6) Installing a ground jumper cable is also recommended to comply with
local electrical laws.
*Install this system according to your local laws. It is highly recommended to
have this unit installed by a license professional.
  • Page 1 1

IFILTER XWH-600 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI